From MAILER-DAEMON Fri Jul 02 08:17:00 2004
Received: from mailman by lists.gnu.org with archive (Exim 4.33)
	id 1BgMyS-0007Qm-SG
	for mharc-bug-bison@gnu.org; Fri, 02 Jul 2004 08:17:00 -0400
Received: from mailman by lists.gnu.org with tmda-scanned (Exim 4.33)
	id 1BgMyS-0007Qh-Ad
	for bug-bison@gnu.org; Fri, 02 Jul 2004 08:17:00 -0400
Received: from exim by lists.gnu.org with spam-scanned (Exim 4.33)
	id 1BgMyR-0007QO-Lr
	for bug-bison@gnu.org; Fri, 02 Jul 2004 08:17:00 -0400
Received: from [199.232.76.173] (helo=monty-python.gnu.org)
	by lists.gnu.org with esmtp (Exim 4.33) id 1BgMyR-0007QL-KO
	for bug-bison@gnu.org; Fri, 02 Jul 2004 08:16:59 -0400
Received: from [194.149.80.4] (helo=ex-nld-ims0.baan.com)
	by monty-python.gnu.org with esmtp (Exim 4.34) id 1BgMwX-0002xV-8n
	for bug-bison@gnu.org; Fri, 02 Jul 2004 08:15:01 -0400
Received: by ex-nld-ims0.ssainternal.net with Internet Mail Service
	(5.5.2657.72) id <N6Z3ZCNM>; Fri, 2 Jul 2004 14:14:58 +0200
Message-ID: <A2D9ADAB2F437E429A72A3A6026F1C8906627631@ex-nld-u0.ssainternal.net>
From: Kees Dekker <kdekker@baan.nl>
To: 'Paul Eggert' <eggert@CS.UCLA.EDU>, "'kasal@ucw.cz'" <kasal@ucw.cz>
Date: Fri, 2 Jul 2004 14:14:57 +0200 
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2657.72)
Content-Type: text/plain;
	charset="iso-8859-1"
Cc: "'bug-gnu-utils@prep.ai.mit.edu'" <bug-gnu-utils@ftp.gnu.org>,
	"'bug-bison@gnu.org'" <bug-bison@gnu.org>
Subject: RE: bugs found on bison/m4 on windows
X-BeenThere: bug-bison@gnu.org
X-Mailman-Version: 2.1.4
Precedence: list
List-Id: "Bug reports for Bison, the GNU parser generator" <bug-bison.gnu.org>
List-Unsubscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=unsubscribe>
List-Archive: <http://lists.gnu.org/pipermail/bug-bison>
List-Post: <mailto:bug-bison@gnu.org>
List-Help: <mailto:bug-bison-request@gnu.org?subject=help>
List-Subscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=subscribe>
X-List-Received-Date: Fri, 02 Jul 2004 12:17:00 -0000

Hi,

Thanks for very fast response. Unfortunately, I do not know a bug reporting
mailaddress for the 'windows guys', like Stepan suggested to me (in another
mail).. Probably you can help me. Because I was off yesterday for a part of
the day, my response is a little bit delayed. I hope you will apply
suggested solutions below.

About the first problem:
The problem is in bison (due to forgetting to strip some quotes), see below,
cases a. and c AND in m4, cases b. and d.
Possible cases:
a. set BISON_PKGDATADIR="dir with spaces but with quotes"
b. set BISON_PKGDATADIR=dir with spaces without quotes
c. set BISON_PKGDATADIR="dir_withhout_spaces_with_quotes"
d. set BISON_PKGDATADIR=dir_withhout_spaces_without_quotes

It is of course possible to remove leading and trailing spaces in bison (for
both M4 as well as BISON_PKGDATADIR), but actually I think it is a user
fault (I changed my mind). You may like to add a (currently not existing)
unquote function to unquote pkgdatadir and/or m4 in output.c:548
(output_skeleton()). So cases a. and c. should be corrected by user.
However, m4 do not like case b. Therefore, you may think about skipping a
fix for this. If you like, I can write a unquote function if needed. But for
now, I can live with the current behavior of bison regarding
BISON_PKGDATADIR.

Unfortunatelly, my build of M4(sources) (with CygWin) do not have the
problems for cases b. and d. (see above). Only the binary version of m4.exe,
downloaded from http://gnuwin32.sourceforge.net/packages/m4.htm has problems
when BISON_PKGDATADIR contains spaces (and no surrounding quotes), but I
cannot find a email address for who will pick up bug reports... The email
address in the README file, provided with the sources is
'bug-gnu-utils@prep.ai.mit.edu', but that email address is not mentioned on
the mentioned home page for m4 (http://www.seindal.dk/rene/gnu).

About the second problem (in M4) for binary/text mode read:
Problem can be easily reproduced if yacc.c is in MS-DOS text mode (at
default, when installing bison, yacc.c is in Unix style text mode). So if M4
is openening files in text mode (rather than bin mode) it is ok (tested by
me). Note that if no 't' or 'b' modifier is specified in fopen(), and if
msvcrt.dll is used, and if _fmode (a global variable) is not set, that fopen
opens default in text mode (i.e. similar to what is wanted). To prevent
incompatibility with Unix systems, I suggest to remove the current 'b'
modifier in the fopen() calls in patch_search() (path.c:107 and 127). For
more info about fopen on Windows, see:
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/vclib/html/
_crt_fopen.2c_._wfopen.asp

However, when building whith cygwin, fopen seems not to understand textmode,
so in that case, file is still untranslated, and \r\n is sent to bison. Just
for reliability, please also consider next change (scan-skel.l:47-), i.e.
change from strcmp to strncmp to prevent string compare problems if \r\n is
at the end of the string.

old code:

"@output ".*\n {
  char const *filename = yytext + sizeof "@output " - 1;
  yytext[yyleng - 1] = '\0';

  if (*filename == '@')
    {
      if (strcmp (filename, "@output_header_name@") == 0)
	filename = spec_defines_file;
      else if (strcmp (filename, "@output_parser_name@") == 0)
	filename = parser_file_name;
      else
	abort ();
    }

new code:

"@output ".*\n {
  char const *filename = yytext + sizeof "@output " - 1;
  int cmplen;

  /* skip \r if \r\n pattern (DOS-textstyle) found at the end of the string
*/
  if ((yytext[yyleng - 2] = '\r') && (yytext[yyleng - 1] = '\n'))
    cmplen = yyleng - 1;
  else
    cmplen = yyleng;

  yytext[yyleng - 1] = '\0';

  if (*filename == '@')
  {
    if (strncmp (filename, "@output_header_name@", cmplen) == 0)
 	filename = spec_defines_file;
    else if (strncmp (filename, "@output_parser_name@", cmplen) == 0)
	filename = parser_file_name;
    else
	abort ();
  }

Unfortunately, I could not test the change above, since my build environment
(cyfwin) is not properly working.

BTW. Most Unix systems already have (f)lex/yacc, so usually we are using
bison on the platforms which doesn't have a good lexer/yacc (i.e. Windows
:-)).

Regards,
Kees Dekker

-----Original Message-----
From: Paul Eggert [mailto:eggert@CS.UCLA.EDU]
Sent: Thursday, July 01, 2004 00:28
To: Kees Dekker
Cc: 'bug-bison@gnu.org'; 'bug-gnu-utils@prep.ai.mit.edu'
Subject: Re: bugs found on bison/m4 on windows


Kees Dekker <kdekker@baan.nl> writes:

> 1. m4 is not able to open a file from a directory with spaces if
> BISON_PKGDATADIR dir contains spaces. I guess this could be easily fixed
by
> escaping the arguments when m4 is called from bison in output.c, function
> output().

This sounds like a bug in the Microsoft Windows port, not in Bison
itself.  Bison simply passes the strings to execvp, and if they
contain spaces execvp should do the correct thing with them.  My guess
is that your execve is busted, or your modified version of Bison
didn't use execve, or something like that.  Please contact the people
who did your Microsoft Windows port and notify them of the problem.

> 1. open files in m4 in text mode instead of binary mode

Yes, that sounds like the correct fix to the second problem.  I
suspect the problem is that Bison is creating these streams with the
"pipe" system call, and that on Microsoft Windows "pipe" initially
puts file descriptors in binary mode, but when Bison uses fdopen (fd,
"r") and reads the files in (stdio) text mode, the resulting behavior
is undefined.  Does this diagnosis appear correct to you?  If so, I'll
modify Bison to change the pipe file-descriptors to use text mode,
before invoking fdopen.

Thanks.



From MAILER-DAEMON Fri Jul 02 13:10:19 2004
Received: from mailman by lists.gnu.org with archive (Exim 4.33)
	id 1BgRYJ-00039M-0P
	for mharc-bug-bison@gnu.org; Fri, 02 Jul 2004 13:10:19 -0400
Received: from mailman by lists.gnu.org with tmda-scanned (Exim 4.33)
	id 1BgRYH-00038s-Ez
	for bug-bison@gnu.org; Fri, 02 Jul 2004 13:10:17 -0400
Received: from exim by lists.gnu.org with spam-scanned (Exim 4.33)
	id 1BgRYF-00038Z-Nn
	for bug-bison@gnu.org; Fri, 02 Jul 2004 13:10:16 -0400
Received: from [199.232.76.173] (helo=monty-python.gnu.org)
	by lists.gnu.org with esmtp (Exim 4.33)
	id 1BgRYF-00038P-LB; Fri, 02 Jul 2004 13:10:15 -0400
Received: from [147.231.88.1] (helo=matsrv.math.cas.cz)
	by monty-python.gnu.org with esmtp (TLSv1:DES-CBC3-SHA:168)
	(Exim 4.34) id 1BgRW7-0002Tb-J8; Fri, 02 Jul 2004 13:08:04 -0400
Received: from matsrv.math.cas.cz (localhost.localdomain [127.0.0.1])
	by matsrv.math.cas.cz (8.12.8/8.12.8) with ESMTP id i62H84i6023158;
	Fri, 2 Jul 2004 19:08:04 +0200
Received: (from kasal@localhost)
	by matsrv.math.cas.cz (8.12.8/8.12.8/Submit) id i62H8208023156;
	Fri, 2 Jul 2004 19:08:02 +0200
Date: Fri, 2 Jul 2004 19:08:01 +0200
From: Stepan Kasal <kasal@ucw.cz>
To: Kees Dekker <kdekker@baan.nl>
Message-ID: <20040702170801.GA21735@matsrv.math.cas.cz>
References: <A2D9ADAB2F437E429A72A3A6026F1C8906627631@ex-nld-u0.ssainternal.net>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <A2D9ADAB2F437E429A72A3A6026F1C8906627631@ex-nld-u0.ssainternal.net>
User-Agent: Mutt/1.4.1i
X-Virus-Scanned: clamd / ClamAV version 0.70, clamav-milter version 0.70j
Cc: bug-gnu-utils@gnu.org, bug-bison@gnu.org
Subject: Re: bugs found on bison/m4 on windows
X-BeenThere: bug-bison@gnu.org
X-Mailman-Version: 2.1.4
Precedence: list
List-Id: "Bug reports for Bison, the GNU parser generator" <bug-bison.gnu.org>
List-Unsubscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=unsubscribe>
List-Archive: <http://lists.gnu.org/pipermail/bug-bison>
List-Post: <mailto:bug-bison@gnu.org>
List-Help: <mailto:bug-bison-request@gnu.org?subject=help>
List-Subscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=subscribe>
X-List-Received-Date: Fri, 02 Jul 2004 17:10:17 -0000

Hello,

On Fri, Jul 02, 2004 at 02:14:57PM +0200, Kees Dekker wrote:
> Unfortunatelly, my build of M4(sources) (with CygWin) do not have the
> problems for cases b. and d. (see above). Only the binary version of m4.exe,
> downloaded from http://gnuwin32.sourceforge.net/packages/m4.htm has problems
> when BISON_PKGDATADIR contains spaces (and no surrounding quotes), but I
> cannot find a email address for who will pick up bug reports...

When you go to http://gnuwin32.sourceforge.net/, there are "Bugs" and
"Contact" sections in the left narrow column.

But I wouldn't combine two Windows ports together. Why not just stick
with Cygwin?

> However, when building whith cygwin, fopen seems not to understand textmode,

There must be a way to open file in textmode under cygwin, I guess that 
the O_TEXT flag should work.  Try to search the docs on cygwin.com, for more
info.

Good luck,
	Stepan Kasal



From MAILER-DAEMON Fri Jul 02 13:11:21 2004
Received: from mailman by lists.gnu.org with archive (Exim 4.33)
	id 1BgRZI-0003So-R6
	for mharc-bug-bison@gnu.org; Fri, 02 Jul 2004 13:11:20 -0400
Received: from mailman by lists.gnu.org with tmda-scanned (Exim 4.33)
	id 1BgRZI-0003Sc-8P
	for bug-bison@gnu.org; Fri, 02 Jul 2004 13:11:20 -0400
Received: from exim by lists.gnu.org with spam-scanned (Exim 4.33)
	id 1BgRZG-0003SM-Oy
	for bug-bison@gnu.org; Fri, 02 Jul 2004 13:11:20 -0400
Received: from [199.232.76.173] (helo=monty-python.gnu.org)
	by lists.gnu.org with esmtp (Exim 4.33)
	id 1BgRZE-0003Rp-V9; Fri, 02 Jul 2004 13:11:17 -0400
Received: from [131.179.128.19] (helo=kiwi.cs.ucla.edu)
	by monty-python.gnu.org with esmtp (Exim 4.34)
	id 1BgRXE-00037N-Fj; Fri, 02 Jul 2004 13:09:12 -0400
Received: from penguin.cs.ucla.edu (Penguin.CS.UCLA.EDU [131.179.64.200])
	by kiwi.cs.ucla.edu (8.11.7p1+Sun/8.11.7/UCLACS-5.2) with ESMTP id
	i62H99d01709; Fri, 2 Jul 2004 10:09:09 -0700 (PDT)
Received: from eggert by penguin.cs.ucla.edu with local (Exim 3.35 #1 (Debian))
	id 1BgRXB-0000Vu-00; Fri, 02 Jul 2004 10:09:09 -0700
To: Kees Dekker <kdekker@baan.nl>
References: <A2D9ADAB2F437E429A72A3A6026F1C8906627631@ex-nld-u0.ssainternal.net>
From: Paul Eggert <eggert@CS.UCLA.EDU>
Date: Fri, 02 Jul 2004 10:09:09 -0700
In-Reply-To: <A2D9ADAB2F437E429A72A3A6026F1C8906627631@ex-nld-u0.ssainternal.net>
	(Kees Dekker's message of "Fri, 2 Jul 2004 14:14:57 +0200")
Message-ID: <87d63enxoq.fsf@penguin.cs.ucla.edu>
User-Agent: Gnus/5.1006 (Gnus v5.10.6) Emacs/21.3 (gnu/linux)
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Sender: Paul Eggert <eggert@penguin.cs.ucla.edu>
Cc: "'bug-gnu-utils@gnu.org'" <bug-gnu-utils@gnu.org>,
	"'bug-bison@gnu.org'" <bug-bison@gnu.org>
Subject: Re: bugs found on bison/m4 on windows
X-BeenThere: bug-bison@gnu.org
X-Mailman-Version: 2.1.4
Precedence: list
List-Id: "Bug reports for Bison, the GNU parser generator" <bug-bison.gnu.org>
List-Unsubscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=unsubscribe>
List-Archive: <http://lists.gnu.org/pipermail/bug-bison>
List-Post: <mailto:bug-bison@gnu.org>
List-Help: <mailto:bug-bison-request@gnu.org?subject=help>
List-Subscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=subscribe>
X-List-Received-Date: Fri, 02 Jul 2004 17:11:20 -0000

Kees Dekker <kdekker@baan.nl> writes:

> Please also consider next change (scan-skel.l:47-), i.e.
> change from strcmp to strncmp to prevent string compare problems if \r\n is
> at the end of the string.

I would rather not contort the Bison code proper to deal with this, as
there are probably other places where \r gets in the way.  I'd rather
remove the carriage returns systematically.  I looked at the source
code to the port that you mentioned, and found this in lib/subpipe.h:

# define pipe(a) _pipe((a), 0, _O_BINARY | O_NOINHERIT)

This appears to be the problem.  Change that _O_BINARY to _O_TEXT and
I'd guess your problem will go away.


> However, m4 do not like case b.

As mentioned earlier I think this problem is with the Microsoft
Windows port, not with Bison or M4 itself, so it's really out of scope
here: we don't maintain it.  I have reported your bugs to the
developers of that port, and it's bug 984194 there: see
<http://sourceforge.net/tracker/index.php?func=detail&aid=984194&group_id=23617&atid=379173>.



From MAILER-DAEMON Sat Jul 03 05:23:59 2004
Received: from mailman by lists.gnu.org with archive (Exim 4.33)
	id 1BggkZ-0006cr-Kh
	for mharc-bug-bison@gnu.org; Sat, 03 Jul 2004 05:23:59 -0400
Received: from mailman by lists.gnu.org with tmda-scanned (Exim 4.33)
	id 1BggkX-0006aV-Qa
	for bug-bison@gnu.org; Sat, 03 Jul 2004 05:23:57 -0400
Received: from exim by lists.gnu.org with spam-scanned (Exim 4.33)
	id 1BggkV-0006X7-TX
	for bug-bison@gnu.org; Sat, 03 Jul 2004 05:23:57 -0400
Received: from [199.232.76.173] (helo=monty-python.gnu.org)
	by lists.gnu.org with esmtp (Exim 4.33)
	id 1BggkV-0006X4-RG; Sat, 03 Jul 2004 05:23:55 -0400
Received: from [192.114.186.23] (helo=aragorn.inter.net.il)
	by monty-python.gnu.org with esmtp (Exim 4.34)
	id 1Bggic-0002mY-He; Sat, 03 Jul 2004 05:21:58 -0400
Received: from zaretski (pns03-206-118.inter.net.il [80.230.206.118])
	by aragorn.inter.net.il (MOS 3.4.6-GR) with ESMTP id DNZ93225;
	Sat, 3 Jul 2004 12:21:47 +0300 (IDT)
Date: Sat, 03 Jul 2004 12:17:11 +0200
From: "Eli Zaretskii" <eliz@gnu.org>
Sender: halo1@zahav.net.il
To: Stepan Kasal <kasal@ucw.cz>
Message-Id: <2719-Sat03Jul2004121710+0300-eliz@gnu.org>
X-Mailer: emacs 21.3.50 (via feedmail 8 I) and Blat ver 1.8.9
In-reply-to: <20040702170801.GA21735@matsrv.math.cas.cz> (message from Stepan
	Kasal on Fri, 2 Jul 2004 19:08:01 +0200)
References: <A2D9ADAB2F437E429A72A3A6026F1C8906627631@ex-nld-u0.ssainternal.net>
	<20040702170801.GA21735@matsrv.math.cas.cz>
Cc: bug-gnu-utils@gnu.org, kdekker@baan.nl, bug-bison@gnu.org
Subject: Re: bugs found on bison/m4 on windows
X-BeenThere: bug-bison@gnu.org
X-Mailman-Version: 2.1.4
Precedence: list
Reply-To: Eli Zaretskii <eliz@gnu.org>
List-Id: "Bug reports for Bison, the GNU parser generator" <bug-bison.gnu.org>
List-Unsubscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=unsubscribe>
List-Archive: <http://lists.gnu.org/pipermail/bug-bison>
List-Post: <mailto:bug-bison@gnu.org>
List-Help: <mailto:bug-bison-request@gnu.org?subject=help>
List-Subscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=subscribe>
X-List-Received-Date: Sat, 03 Jul 2004 09:23:58 -0000

> Date: Fri, 2 Jul 2004 19:08:01 +0200
> From: Stepan Kasal <kasal@ucw.cz>
> 
> > However, when building whith cygwin, fopen seems not to understand textmode,
> 
> There must be a way to open file in textmode under cygwin, I guess that 
> the O_TEXT flag should work.

IIRC, Cygwin has a `mount' utility to do this: one should ``mount''
the appropriate filesystem with the `text' option, then all the files
there are opened in text mode by default.



From MAILER-DAEMON Mon Jul 05 03:05:58 2004
Received: from mailman by lists.gnu.org with archive (Exim 4.33)
	id 1BhNY6-0006Bm-Ll
	for mharc-bug-bison@gnu.org; Mon, 05 Jul 2004 03:05:58 -0400
Received: from mailman by lists.gnu.org with tmda-scanned (Exim 4.33)
	id 1BhNY4-0006BS-RK
	for bug-bison@gnu.org; Mon, 05 Jul 2004 03:05:56 -0400
Received: from exim by lists.gnu.org with spam-scanned (Exim 4.33)
	id 1BhNY1-0006BG-SJ
	for bug-bison@gnu.org; Mon, 05 Jul 2004 03:05:56 -0400
Received: from [199.232.76.173] (helo=monty-python.gnu.org)
	by lists.gnu.org with esmtp (Exim 4.33)
	id 1BhNY1-0006BD-FJ; Mon, 05 Jul 2004 03:05:53 -0400
Received: from [194.149.80.4] (helo=ex-nld-ims0.baan.com)
	by monty-python.gnu.org with esmtp (Exim 4.34)
	id 1BhNVz-0000Bz-Py; Mon, 05 Jul 2004 03:03:48 -0400
Received: by ex-nld-ims0.ssainternal.net with Internet Mail Service
	(5.5.2657.72) id <N6ZPM8NH>; Mon, 5 Jul 2004 09:03:42 +0200
Message-ID: <A2D9ADAB2F437E429A72A3A6026F1C8906627638@ex-nld-u0.ssainternal.net>
From: Kees Dekker <kdekker@baan.nl>
To: 'Stepan Kasal' <kasal@ucw.cz>
Date: Mon, 5 Jul 2004 09:03:38 +0200 
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2657.72)
Content-Type: text/plain;
	charset="iso-8859-1"
Cc: bug-gnu-utils@gnu.org, bug-bison@gnu.org
Subject: RE: bugs found on bison/m4 on windows
X-BeenThere: bug-bison@gnu.org
X-Mailman-Version: 2.1.5
Precedence: list
List-Id: "Bug reports for Bison, the GNU parser generator" <bug-bison.gnu.org>
List-Unsubscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=unsubscribe>
List-Archive: <http://lists.gnu.org/pipermail/bug-bison>
List-Post: <mailto:bug-bison@gnu.org>
List-Help: <mailto:bug-bison-request@gnu.org?subject=help>
List-Subscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=subscribe>
X-List-Received-Date: Mon, 05 Jul 2004 07:05:57 -0000

Hi,

As far as I could see, the port downloaded from sourceforge.net is not done
with cygwin (I just did it myself). Please forget that I worked with cygwin.
I will submit a bug report to the sourceforge guys. Thanks for your
suggestion.

Regards,
Kees

-----Original Message-----
From: Stepan Kasal [mailto:kasal@ucw.cz]
Sent: Friday, July 02, 2004 19:08
To: Kees Dekker
Cc: bug-bison@gnu.org; bug-gnu-utils@gnu.org
Subject: Re: bugs found on bison/m4 on windows


Hello,

On Fri, Jul 02, 2004 at 02:14:57PM +0200, Kees Dekker wrote:
> Unfortunatelly, my build of M4(sources) (with CygWin) do not have the
> problems for cases b. and d. (see above). Only the binary version of
m4.exe,
> downloaded from http://gnuwin32.sourceforge.net/packages/m4.htm has
problems
> when BISON_PKGDATADIR contains spaces (and no surrounding quotes), but I
> cannot find a email address for who will pick up bug reports...

When you go to http://gnuwin32.sourceforge.net/, there are "Bugs" and
"Contact" sections in the left narrow column.

But I wouldn't combine two Windows ports together. Why not just stick
with Cygwin?

> However, when building whith cygwin, fopen seems not to understand
textmode,

There must be a way to open file in textmode under cygwin, I guess that 
the O_TEXT flag should work.  Try to search the docs on cygwin.com, for more
info.

Good luck,
	Stepan Kasal



From MAILER-DAEMON Mon Jul 05 03:18:08 2004
Received: from mailman by lists.gnu.org with archive (Exim 4.33)
	id 1BhNjs-0001zc-0W
	for mharc-bug-bison@gnu.org; Mon, 05 Jul 2004 03:18:08 -0400
Received: from mailman by lists.gnu.org with tmda-scanned (Exim 4.33)
	id 1BhNjp-0001yX-S1
	for bug-bison@gnu.org; Mon, 05 Jul 2004 03:18:05 -0400
Received: from exim by lists.gnu.org with spam-scanned (Exim 4.33)
	id 1BhNjo-0001we-7H
	for bug-bison@gnu.org; Mon, 05 Jul 2004 03:18:05 -0400
Received: from [199.232.76.173] (helo=monty-python.gnu.org)
	by lists.gnu.org with esmtp (Exim 4.33)
	id 1BhNjo-0001wb-4X; Mon, 05 Jul 2004 03:18:04 -0400
Received: from [194.149.80.4] (helo=ex-nld-ims0.baan.com)
	by monty-python.gnu.org with esmtp (Exim 4.34)
	id 1BhNhP-0003E5-Dn; Mon, 05 Jul 2004 03:15:35 -0400
Received: by ex-nld-ims0.ssainternal.net with Internet Mail Service
	(5.5.2657.72) id <N6ZPM0KJ>; Mon, 5 Jul 2004 09:15:34 +0200
Message-ID: <A2D9ADAB2F437E429A72A3A6026F1C890662763A@ex-nld-u0.ssainternal.net>
From: Kees Dekker <kdekker@baan.nl>
To: 'Paul Eggert' <eggert@CS.UCLA.EDU>
Date: Mon, 5 Jul 2004 09:15:27 +0200 
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2657.72)
Content-Type: text/plain;
	charset="iso-8859-1"
Cc: "'bug-gnu-utils@gnu.org'" <bug-gnu-utils@gnu.org>,
	"'bug-bison@gnu.org'" <bug-bison@gnu.org>
Subject: RE: bugs found on bison/m4 on windows
X-BeenThere: bug-bison@gnu.org
X-Mailman-Version: 2.1.5
Precedence: list
List-Id: "Bug reports for Bison, the GNU parser generator" <bug-bison.gnu.org>
List-Unsubscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=unsubscribe>
List-Archive: <http://lists.gnu.org/pipermail/bug-bison>
List-Post: <mailto:bug-bison@gnu.org>
List-Help: <mailto:bug-bison-request@gnu.org?subject=help>
List-Subscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=subscribe>
X-List-Received-Date: Mon, 05 Jul 2004 07:18:06 -0000

Thanks a lot for reporting the bug..
Regards,
Kees

-----Original Message-----
From: Paul Eggert [mailto:eggert@CS.UCLA.EDU]
Sent: Friday, July 02, 2004 19:09
To: Kees Dekker
Cc: 'bug-bison@gnu.org'; 'bug-gnu-utils@gnu.org'
Subject: Re: bugs found on bison/m4 on windows


Kees Dekker <kdekker@baan.nl> writes:

> Please also consider next change (scan-skel.l:47-), i.e.
> change from strcmp to strncmp to prevent string compare problems if \r\n
is
> at the end of the string.

I would rather not contort the Bison code proper to deal with this, as
there are probably other places where \r gets in the way.  I'd rather
remove the carriage returns systematically.  I looked at the source
code to the port that you mentioned, and found this in lib/subpipe.h:

# define pipe(a) _pipe((a), 0, _O_BINARY | O_NOINHERIT)

This appears to be the problem.  Change that _O_BINARY to _O_TEXT and
I'd guess your problem will go away.


> However, m4 do not like case b.

As mentioned earlier I think this problem is with the Microsoft
Windows port, not with Bison or M4 itself, so it's really out of scope
here: we don't maintain it.  I have reported your bugs to the
developers of that port, and it's bug 984194 there: see
<http://sourceforge.net/tracker/index.php?func=detail&aid=984194&group_id=23
617&atid=379173>.



From MAILER-DAEMON Tue Jul 06 19:44:07 2004
Received: from mailman by lists.gnu.org with archive (Exim 4.33)
	id 1Bhzbb-000351-7p
	for mharc-bug-bison@gnu.org; Tue, 06 Jul 2004 19:44:07 -0400
Received: from mailman by lists.gnu.org with tmda-scanned (Exim 4.33)
	id 1BhzbZ-00034p-Mt
	for bug-bison@gnu.org; Tue, 06 Jul 2004 19:44:05 -0400
Received: from exim by lists.gnu.org with spam-scanned (Exim 4.33)
	id 1BhzbY-00034d-4a
	for bug-bison@gnu.org; Tue, 06 Jul 2004 19:44:05 -0400
Received: from [199.232.76.173] (helo=monty-python.gnu.org)
	by lists.gnu.org with esmtp (Exim 4.33)
	id 1BhzbY-00034a-1n; Tue, 06 Jul 2004 19:44:04 -0400
Received: from [134.76.10.26] (helo=mailer.gwdg.de)
	by monty-python.gnu.org with esmtp (TLSv1:DES-CBC3-SHA:168)
	(Exim 4.34) id 1BhzZO-000537-7y; Tue, 06 Jul 2004 19:41:50 -0400
Received: from mailbox.gwdg.de ([134.76.10.21] helo=gwdg.de)
	by mailer.gwdg.de with esmtp (Exim 4.34)
	id 1BhzZL-0003tL-Ol; Wed, 07 Jul 2004 01:41:48 +0200
Content-Length: 1562
Content-Type: text/plain; charset=iso-8859-1
X-Originating-IP: lfinsto1[134.76.139.103]
Date: Wed, 07 Jul 2004 01:41:47 +0200
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
User-Agent: IMHO/0.98.3+G (Webmail for Roxen)
From: "Laurence Finston" <lfinsto1@gwdg.de>
To: bug-bison@gnu.org, help-bison@gnu.org
X-Virus-Scanned: (clean) by exiscan+sophie
Message-Id: <E1BhzbY-00034d-4a@lists.gnu.org>
Cc: 
Subject: Problems with multithreading and slow compilation
X-BeenThere: bug-bison@gnu.org
X-Mailman-Version: 2.1.5
Precedence: list
List-Id: "Bug reports for Bison, the GNU parser generator" <bug-bison.gnu.org>
List-Unsubscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=unsubscribe>
List-Archive: <http://lists.gnu.org/pipermail/bug-bison>
List-Post: <mailto:bug-bison@gnu.org>
List-Help: <mailto:bug-bison-request@gnu.org?subject=help>
List-Subscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=subscribe>
X-List-Received-Date: Tue, 06 Jul 2004 23:44:06 -0000

Hello, 

I've been having a bit of trouble with the debugging output 
produced by Bison when `yydebug' is set to a non-zero value, 
when calling `yyparse()' multiple times in different threads.

Since the output is just written to `stdout' (or maybe `stderr'), 
the output from the different invocations of `yyparse()' is all
mixed up.  

I haven't examined the output closely enough to tell 
whether the actual calls to `printf()' (or whatever Bison uses) 
are interrupted, but I suspect they are.

Would the Bison developers have any interest in implementing 
the following features? 

1) making it possible to redirect the debugging output to files, 
   one for each invocation of `yyparse()'.

2) Protecting `stdout' and `stderr' with mutexes, to keep 
   writes to these streams from being interrupted
   (unless they are already, of course).
   

I'm also having problems with having to wait a long time while the 
C++ file generated by Bison compiles.  I've been meaning to try to put
more code for the actions into functions to see if this will help, 
but since the return values of the functions must be tested in the rules, 
it makes things more complicated and interferes with hacking.

What I'd like is a way of breaking up the actions for the rules into
multiple compilation units, so that only the parts that have changed
will need to be recompiled.  Is this something the Bison developers
might consider implementing?
   
Have other users been having similar problems?

Laurence Finston
GNU 3DLDF maintainer
http://www.gnu.org/software/3dldf   



From MAILER-DAEMON Wed Jul 07 13:38:53 2004
Received: from mailman by lists.gnu.org with archive (Exim 4.33)
	id 1BiGNh-000245-4Y
	for mharc-bug-bison@gnu.org; Wed, 07 Jul 2004 13:38:53 -0400
Received: from mailman by lists.gnu.org with tmda-scanned (Exim 4.33)
	id 1BiGNf-00023T-Hc
	for bug-bison@gnu.org; Wed, 07 Jul 2004 13:38:51 -0400
Received: from exim by lists.gnu.org with spam-scanned (Exim 4.33)
	id 1BiGNd-00021n-JW
	for bug-bison@gnu.org; Wed, 07 Jul 2004 13:38:50 -0400
Received: from [199.232.76.173] (helo=monty-python.gnu.org)
	by lists.gnu.org with esmtp (Exim 4.33)
	id 1BiGNa-00020v-AV; Wed, 07 Jul 2004 13:38:46 -0400
Received: from [131.179.128.19] (helo=kiwi.cs.ucla.edu)
	by monty-python.gnu.org with esmtp (Exim 4.34)
	id 1BiGLJ-0000Oy-Jj; Wed, 07 Jul 2004 13:36:25 -0400
Received: from penguin.cs.ucla.edu (Penguin.CS.UCLA.EDU [131.179.64.200])
	by kiwi.cs.ucla.edu (8.11.7p1+Sun/8.11.7/UCLACS-5.2) with ESMTP id
	i67Ha2d27924; Wed, 7 Jul 2004 10:36:02 -0700 (PDT)
Received: from eggert by penguin.cs.ucla.edu with local (Exim 3.35 #1 (Debian))
	id 1BiGKw-00013g-00; Wed, 07 Jul 2004 10:36:02 -0700
To: "Laurence Finston" <lfinsto1@gwdg.de>
References: <E1BhzbY-00034d-4a@lists.gnu.org>
From: Paul Eggert <eggert@CS.UCLA.EDU>
Date: Wed, 07 Jul 2004 10:36:02 -0700
In-Reply-To: <E1BhzbY-00034d-4a@lists.gnu.org> (Laurence Finston's message
	of "Wed, 07 Jul 2004 01:41:47 +0200")
Message-ID: <87u0wjafel.fsf@penguin.cs.ucla.edu>
User-Agent: Gnus/5.1006 (Gnus v5.10.6) Emacs/21.3 (gnu/linux)
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Sender: Paul Eggert <eggert@penguin.cs.ucla.edu>
Cc: help-bison@gnu.org, bug-bison@gnu.org
Subject: Re: Problems with multithreading and slow compilation
X-BeenThere: bug-bison@gnu.org
X-Mailman-Version: 2.1.5
Precedence: list
List-Id: "Bug reports for Bison, the GNU parser generator" <bug-bison.gnu.org>
List-Unsubscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=unsubscribe>
List-Archive: <http://lists.gnu.org/pipermail/bug-bison>
List-Post: <mailto:bug-bison@gnu.org>
List-Help: <mailto:bug-bison-request@gnu.org?subject=help>
List-Subscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=subscribe>
X-List-Received-Date: Wed, 07 Jul 2004 17:38:51 -0000

"Laurence Finston" <lfinsto1@gwdg.de> writes:

> I haven't examined the output closely enough to tell 
> whether the actual calls to `printf()' (or whatever Bison uses) 
> are interrupted, but I suspect they are.

Yes, this is the same problem that any multithreaded app would have
when writing to stdout.  POSIX says that printf is thread-safe, so you
shouldn't lose any output, but it may be arbitrarily interleaved with
other threads' output.


> Would the Bison developers have any interest in implementing 
> the following features? 
>
> 1) making it possible to redirect the debugging output to files, 
>    one for each invocation of `yyparse()'.
>
> 2) Protecting `stdout' and `stderr' with mutexes, to keep 
>    writes to these streams from being interrupted
>    (unless they are already, of course).

These both sound like worthy features.  Can you get the effect that
you want by defininig YYFPRINTF?  If so, then perhaps we just need to
make this sort of thing easier (since not everyone will think of doing
that).


> What I'd like is a way of breaking up the actions for the rules into
> multiple compilation units, so that only the parts that have changed
> will need to be recompiled.  Is this something the Bison developers
> might consider implementing?

We might consider it, yes, but it sounds hard.

> Have other users been having similar problems?

Nobody has written us about them that I recall.  But it sounds like
you're a fairly advanced user.



From MAILER-DAEMON Wed Jul 07 13:39:50 2004
Received: from mailman by lists.gnu.org with archive (Exim 4.33)
	id 1BiGOc-0002LI-Aj
	for mharc-bug-bison@gnu.org; Wed, 07 Jul 2004 13:39:50 -0400
Received: from mailman by lists.gnu.org with tmda-scanned (Exim 4.33)
	id 1BiGOZ-0002JH-ST
	for bug-bison@gnu.org; Wed, 07 Jul 2004 13:39:47 -0400
Received: from exim by lists.gnu.org with spam-scanned (Exim 4.33)
	id 1BiGOY-0002J4-Bc
	for bug-bison@gnu.org; Wed, 07 Jul 2004 13:39:47 -0400
Received: from [199.232.76.173] (helo=monty-python.gnu.org)
	by lists.gnu.org with esmtp (Exim 4.33) id 1BiGOX-0002J1-Pm
	for bug-bison@gnu.org; Wed, 07 Jul 2004 13:39:46 -0400
Received: from [213.163.128.201] (helo=lotus.glocalnet.net)
	by monty-python.gnu.org with esmtp (Exim 4.34) id 1BiGM4-0000aD-OY
	for bug-bison@gnu.org; Wed, 07 Jul 2004 13:37:13 -0400
Received: from [62.127.86.131] (62.127.86.131) by lotus.glocalnet.net
	(7.1.016.1) id 40B035D900D1A17D; Wed, 7 Jul 2004 19:12:26 +0200
X-Sender: haberg@imap.math.su.se
Message-Id: <v03110703bd11dcacf9e3@[62.127.86.129]>
In-Reply-To: <E1BhzbZ-00034r-Sg@lists.gnu.org>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Date: Wed, 7 Jul 2004 19:01:28 +0200
To: "Laurence Finston" <lfinsto1@gwdg.de>
From: Hans Aberg <haberg@math.su.se>
Cc: bug-bison@gnu.org
Subject: Re: Problems with multithreading and slow compilation
X-BeenThere: bug-bison@gnu.org
X-Mailman-Version: 2.1.5
Precedence: list
List-Id: "Bug reports for Bison, the GNU parser generator" <bug-bison.gnu.org>
List-Unsubscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=unsubscribe>
List-Archive: <http://lists.gnu.org/pipermail/bug-bison>
List-Post: <mailto:bug-bison@gnu.org>
List-Help: <mailto:bug-bison-request@gnu.org?subject=help>
List-Subscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=subscribe>
X-List-Received-Date: Wed, 07 Jul 2004 17:39:48 -0000

At 01:41 +0200 2004/07/07, Laurence Finston wrote:
>I've been having a bit of trouble with the debugging output
>produced by Bison when `yydebug' is set to a non-zero value,
>when calling `yyparse()' multiple times in different threads.
>
>Since the output is just written to `stdout' (or maybe `stderr'),
>the output from the different invocations of `yyparse()' is all
>mixed up.
>
>I haven't examined the output closely enough to tell
>whether the actual calls to `printf()' (or whatever Bison uses)
>are interrupted, but I suspect they are.
>
>Would the Bison developers have any interest in implementing
>the following features?
>
>1) making it possible to redirect the debugging output to files,
>   one for each invocation of `yyparse()'.
>
>2) Protecting `stdout' and `stderr' with mutexes, to keep
>   writes to these streams from being interrupted
>   (unless they are already, of course).

It sounds as though it should be put onto the todo-list.

  Hans Aberg





From MAILER-DAEMON Wed Jul 07 13:46:01 2004
Received: from mailman by lists.gnu.org with archive (Exim 4.33)
	id 1BiGUb-0005Ly-JY
	for mharc-bug-bison@gnu.org; Wed, 07 Jul 2004 13:46:01 -0400
Received: from mailman by lists.gnu.org with tmda-scanned (Exim 4.33)
	id 1BiGUa-0005Li-QR
	for bug-bison@gnu.org; Wed, 07 Jul 2004 13:46:00 -0400
Received: from exim by lists.gnu.org with spam-scanned (Exim 4.33)
	id 1BiGUZ-0005LK-7O
	for bug-bison@gnu.org; Wed, 07 Jul 2004 13:46:00 -0400
Received: from [199.232.76.173] (helo=monty-python.gnu.org)
	by lists.gnu.org with esmtp (Exim 4.33)
	id 1BiGUZ-0005LA-4b; Wed, 07 Jul 2004 13:45:59 -0400
Received: from [134.76.10.26] (helo=mailer.gwdg.de)
	by monty-python.gnu.org with esmtp (TLSv1:DES-CBC3-SHA:168)
	(Exim 4.34) id 1BiGS3-0001Si-1y; Wed, 07 Jul 2004 13:43:23 -0400
Received: from gwdu71.gwdg.de ([134.76.8.21])
	by mailer.gwdg.de with esmtp (Exim 4.34)
	id 1BiGS1-0005bD-0A; Wed, 07 Jul 2004 19:43:21 +0200
Received: from localhost by gwdu71.gwdg.de (8.11.1/1.1.29.3/16Jun03-0924AM)
	id i67HhKo0000418859; Wed, 7 Jul 2004 19:43:20 +0200 (MEST)
X-Authentication-Warning: gwdu71.gwdg.de: lfinsto1 owned process doing -bs
Date: Wed, 7 Jul 2004 19:43:19 +0200 (MEST)
From: Laurence Finston <lfinsto1@gwdg.de>
To: Paul Eggert <eggert@CS.UCLA.EDU>
In-Reply-To: <87u0wjafel.fsf@penguin.cs.ucla.edu>
Message-ID: <Pine.OSF.4.58.0407071939480.388554@gwdu71.gwdg.de>
References: <E1BhzbY-00034d-4a@lists.gnu.org>
	<87u0wjafel.fsf@penguin.cs.ucla.edu>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
X-Virus-Scanned: (clean) by exiscan+sophie
Cc: help-bison@gnu.org, bug-bison@gnu.org
Subject: Re: Problems with multithreading and slow compilation
X-BeenThere: bug-bison@gnu.org
X-Mailman-Version: 2.1.5
Precedence: list
List-Id: "Bug reports for Bison, the GNU parser generator" <bug-bison.gnu.org>
List-Unsubscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=unsubscribe>
List-Archive: <http://lists.gnu.org/pipermail/bug-bison>
List-Post: <mailto:bug-bison@gnu.org>
List-Help: <mailto:bug-bison-request@gnu.org?subject=help>
List-Subscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=subscribe>
X-List-Received-Date: Wed, 07 Jul 2004 17:46:01 -0000

On Wed, 7 Jul 2004, Paul Eggert wrote:

> > Would the Bison developers have any interest in implementing
> > the following features?
> >
> > 1) making it possible to redirect the debugging output to files,
> >    one for each invocation of `yyparse()'.
> >
> > 2) Protecting `stdout' and `stderr' with mutexes, to keep
> >    writes to these streams from being interrupted
> >    (unless they are already, of course).
>
> These both sound like worthy features.  Can you get the effect that
> you want by defininig YYFPRINTF?  If so, then perhaps we just need to
> make this sort of thing easier (since not everyone will think of doing
> that).
>

I'll give it a try when I get a chance and let you know.  Thanks for the
suggestion.

>
> > What I'd like is a way of breaking up the actions for the rules into
> > multiple compilation units, so that only the parts that have changed
> > will need to be recompiled.  Is this something the Bison developers
> > might consider implementing?
>
> We might consider it, yes, but it sounds hard.
>

It sounds hard to me, too.  I think it might be worthwhile for large
parsers, though.

Laurence




From MAILER-DAEMON Wed Jul 07 13:56:53 2004
Received: from mailman by lists.gnu.org with archive (Exim 4.33)
	id 1BiGf7-0007uG-IN
	for mharc-bug-bison@gnu.org; Wed, 07 Jul 2004 13:56:53 -0400
Received: from mailman by lists.gnu.org with tmda-scanned (Exim 4.33)
	id 1BiGf3-0007rZ-VD
	for bug-bison@gnu.org; Wed, 07 Jul 2004 13:56:51 -0400
Received: from exim by lists.gnu.org with spam-scanned (Exim 4.33)
	id 1BiGf1-0007qI-ME
	for bug-bison@gnu.org; Wed, 07 Jul 2004 13:56:49 -0400
Received: from [199.232.76.173] (helo=monty-python.gnu.org)
	by lists.gnu.org with esmtp (Exim 4.33)
	id 1BiGf0-0007pt-Kp; Wed, 07 Jul 2004 13:56:46 -0400
Received: from [192.91.147.7] (helo=mailgw2a.lmco.com)
	by monty-python.gnu.org with esmtp (Exim 4.34)
	id 1BiGcf-00037N-Sn; Wed, 07 Jul 2004 13:54:22 -0400
Received: from emss03g01.ems.lmco.com (relay3.ems.lmco.com [141.240.4.144])
	by mailgw2a.lmco.com (8.12.10/8.12.10) with ESMTP id i67HsJgb000832;
	Wed, 7 Jul 2004 13:54:19 -0400 (EDT)
Received: from CONVERSION-DAEMON.lmco.com by lmco.com (PMDF V6.1-1X6 #30875)
	id <0I0H00I01TQJIP@lmco.com>; Wed, 07 Jul 2004 13:54:19 -0400 (EDT)
Received: from EMSS03I00.us.lmco.com ([166.27.250.234]) by lmco.com (PMDF
	V6.1-1X6 #30875) with ESMTP id <0I0H00E8ETQIK9@lmco.com>;
	Wed, 07 Jul 2004 13:54:18 -0400 (EDT)
Received: from EMSS03M09.us.lmco.com ([166.27.250.218]) by
	EMSS03I00.us.lmco.com with Microsoft SMTPSVC(5.0.2195.6713); Wed,
	07 Jul 2004 13:54:18 -0400
Date: Wed, 07 Jul 2004 13:54:18 -0400
From: "Urdaneta,
	Alfonso E (N-Summitt Technologies)" <alfonso.e.urdaneta@lmco.com>
To: Laurence Finston <lfinsto1@gwdg.de>, Paul Eggert <eggert@CS.UCLA.EDU>
Message-id: <561235E193C4974998409B3CF28492C1036DF54E@emss03m09.us.lmco.com>
MIME-version: 1.0
X-MIMEOLE: Produced By Microsoft Exchange V6.0.6487.1
Content-type: text/plain; charset=us-ascii
Content-transfer-encoding: 7BIT
Thread-Topic: Problems with multithreading and slow compilation
Thread-Index: AcRkSf5WtPj1PqxeTGuaibDNca96nQAAfu6g
content-class: urn:content-classes:message
X-MS-Has-Attach: 
X-MS-TNEF-Correlator: 
X-OriginalArrivalTime: 07 Jul 2004 17:54:18.0763 (UTC)
	FILETIME=[6D05ADB0:01C4644B]
Cc: help-bison@gnu.org, bug-bison@gnu.org
Subject: RE: Problems with multithreading and slow compilation
X-BeenThere: bug-bison@gnu.org
X-Mailman-Version: 2.1.5
Precedence: list
List-Id: "Bug reports for Bison, the GNU parser generator" <bug-bison.gnu.org>
List-Unsubscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=unsubscribe>
List-Archive: <http://lists.gnu.org/pipermail/bug-bison>
List-Post: <mailto:bug-bison@gnu.org>
List-Help: <mailto:bug-bison-request@gnu.org?subject=help>
List-Subscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=subscribe>
X-List-Received-Date: Wed, 07 Jul 2004 17:56:51 -0000


as a temporary workaround, have you considered distcc to help your
compilation times ?

--
I'm alfonso e. urdaneta, and I approve this message.



From MAILER-DAEMON Wed Jul 07 14:01:25 2004
Received: from mailman by lists.gnu.org with archive (Exim 4.33)
	id 1BiGjV-0000MZ-LA
	for mharc-bug-bison@gnu.org; Wed, 07 Jul 2004 14:01:25 -0400
Received: from mailman by lists.gnu.org with tmda-scanned (Exim 4.33)
	id 1BiGjU-0000MA-7L
	for bug-bison@gnu.org; Wed, 07 Jul 2004 14:01:24 -0400
Received: from exim by lists.gnu.org with spam-scanned (Exim 4.33)
	id 1BiGjS-0000Ly-OZ
	for bug-bison@gnu.org; Wed, 07 Jul 2004 14:01:23 -0400
Received: from [199.232.76.173] (helo=monty-python.gnu.org)
	by lists.gnu.org with esmtp (Exim 4.33)
	id 1BiGjS-0000Lv-Ln; Wed, 07 Jul 2004 14:01:22 -0400
Received: from [134.76.10.26] (helo=mailer.gwdg.de)
	by monty-python.gnu.org with esmtp (TLSv1:DES-CBC3-SHA:168)
	(Exim 4.34) id 1BiGhF-0003zF-SN; Wed, 07 Jul 2004 13:59:06 -0400
Received: from gwdu71.gwdg.de ([134.76.8.21])
	by mailer.gwdg.de with esmtp (Exim 4.34)
	id 1BiGhE-0002Av-BH; Wed, 07 Jul 2004 19:59:04 +0200
Received: from localhost by gwdu71.gwdg.de (8.11.1/1.1.29.3/16Jun03-0924AM)
	id i67Hx3h0000404329; Wed, 7 Jul 2004 19:59:03 +0200 (MEST)
X-Authentication-Warning: gwdu71.gwdg.de: lfinsto1 owned process doing -bs
Date: Wed, 7 Jul 2004 19:59:02 +0200 (MEST)
From: Laurence Finston <lfinsto1@gwdg.de>
To: "Urdaneta,
	Alfonso E (N-Summitt Technologies)" <alfonso.e.urdaneta@lmco.com>
In-Reply-To: <561235E193C4974998409B3CF28492C1036DF54E@emss03m09.us.lmco.com>
Message-ID: <Pine.OSF.4.58.0407071957290.388554@gwdu71.gwdg.de>
References: <561235E193C4974998409B3CF28492C1036DF54E@emss03m09.us.lmco.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
X-Virus-Scanned: (clean) by exiscan+sophie
Cc: help-bison@gnu.org, bug-bison@gnu.org
Subject: RE: Problems with multithreading and slow compilation
X-BeenThere: bug-bison@gnu.org
X-Mailman-Version: 2.1.5
Precedence: list
List-Id: "Bug reports for Bison, the GNU parser generator" <bug-bison.gnu.org>
List-Unsubscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=unsubscribe>
List-Archive: <http://lists.gnu.org/pipermail/bug-bison>
List-Post: <mailto:bug-bison@gnu.org>
List-Help: <mailto:bug-bison-request@gnu.org?subject=help>
List-Subscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=subscribe>
X-List-Received-Date: Wed, 07 Jul 2004 18:01:24 -0000

On Wed, 7 Jul 2004, Urdaneta, Alfonso E (N-Summitt Technologies) wrote:

>
> as a temporary workaround, have you considered distcc to help your
> compilation times ?
>

I've never of this before and it's not installed on the computer I'm
using.  Could you tell me more about it?

Laurence



From MAILER-DAEMON Wed Jul 07 14:04:23 2004
Received: from mailman by lists.gnu.org with archive (Exim 4.33)
	id 1BiGmN-0000vX-OD
	for mharc-bug-bison@gnu.org; Wed, 07 Jul 2004 14:04:23 -0400
Received: from mailman by lists.gnu.org with tmda-scanned (Exim 4.33)
	id 1BiGmM-0000ul-5k
	for bug-bison@gnu.org; Wed, 07 Jul 2004 14:04:22 -0400
Received: from exim by lists.gnu.org with spam-scanned (Exim 4.33)
	id 1BiGmK-0000u0-3n
	for bug-bison@gnu.org; Wed, 07 Jul 2004 14:04:21 -0400
Received: from [199.232.76.173] (helo=monty-python.gnu.org)
	by lists.gnu.org with esmtp (Exim 4.33)
	id 1BiGmI-0000th-C2; Wed, 07 Jul 2004 14:04:18 -0400
Received: from [192.91.147.7] (helo=mailgw2a.lmco.com)
	by monty-python.gnu.org with esmtp (Exim 4.34)
	id 1BiGk7-0004Vz-Mn; Wed, 07 Jul 2004 14:02:03 -0400
Received: from emss03g01.ems.lmco.com (relay3.ems.lmco.com [141.240.4.144])
	by mailgw2a.lmco.com (8.12.10/8.12.10) with ESMTP id i67I23gb003805;
	Wed, 7 Jul 2004 14:02:03 -0400 (EDT)
Received: from CONVERSION-DAEMON.lmco.com by lmco.com (PMDF V6.1-1X6 #30875)
	id <0I0H00M01U3FKB@lmco.com>; Wed, 07 Jul 2004 14:02:03 -0400 (EDT)
Received: from EMSS03I00.us.lmco.com ([166.27.250.234]) by lmco.com (PMDF
	V6.1-1X6 #30875) with ESMTP id <0I0H00EKLU3E8N@lmco.com>;
	Wed, 07 Jul 2004 14:02:02 -0400 (EDT)
Received: from EMSS03M09.us.lmco.com ([166.27.250.218]) by
	EMSS03I00.us.lmco.com with Microsoft SMTPSVC(5.0.2195.6713); Wed,
	07 Jul 2004 14:02:01 -0400
Date: Wed, 07 Jul 2004 14:02:01 -0400
From: "Urdaneta,
	Alfonso E (N-Summitt Technologies)" <alfonso.e.urdaneta@lmco.com>
To: Laurence Finston <lfinsto1@gwdg.de>
Message-id: <561235E193C4974998409B3CF28492C1036DF54F@emss03m09.us.lmco.com>
MIME-version: 1.0
X-MIMEOLE: Produced By Microsoft Exchange V6.0.6487.1
Content-type: text/plain; charset=us-ascii
Content-transfer-encoding: 7BIT
Thread-Topic: Problems with multithreading and slow compilation
Thread-Index: AcRkTBwrnkszW4wKRAmzkxuxWZWawAAAO5Pg
content-class: urn:content-classes:message
X-MS-Has-Attach: 
X-MS-TNEF-Correlator: 
X-OriginalArrivalTime: 07 Jul 2004 18:02:02.0072 (UTC)
	FILETIME=[812D0580:01C4644C]
Cc: help-bison@gnu.org, bug-bison@gnu.org
Subject: RE: Problems with multithreading and slow compilation
X-BeenThere: bug-bison@gnu.org
X-Mailman-Version: 2.1.5
Precedence: list
List-Id: "Bug reports for Bison, the GNU parser generator" <bug-bison.gnu.org>
List-Unsubscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=unsubscribe>
List-Archive: <http://lists.gnu.org/pipermail/bug-bison>
List-Post: <mailto:bug-bison@gnu.org>
List-Help: <mailto:bug-bison-request@gnu.org?subject=help>
List-Subscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=subscribe>
X-List-Received-Date: Wed, 07 Jul 2004 18:04:22 -0000

> > as a temporary workaround, have you considered distcc to help your
> > compilation times ?
> >
> 
> I've never of this before and it's not installed on the computer I'm
> using.  Could you tell me more about it?

http://distcc.samba.org/

caveat: I haven't tried it yet, only read the project notes.

--
I'm alfonso e. urdaneta, and I approve this message.



From MAILER-DAEMON Wed Jul 14 17:21:32 2004
Received: from mailman by lists.gnu.org with archive (Exim 4.33)
	id 1BkrC0-0005po-0i
	for mharc-bug-bison@gnu.org; Wed, 14 Jul 2004 17:21:32 -0400
Received: from mailman by lists.gnu.org with tmda-scanned (Exim 4.33)
	id 1BkrBy-0005pX-Qd
	for bug-bison@gnu.org; Wed, 14 Jul 2004 17:21:30 -0400
Received: from exim by lists.gnu.org with spam-scanned (Exim 4.33)
	id 1BkrBx-0005p8-2E
	for bug-bison@gnu.org; Wed, 14 Jul 2004 17:21:30 -0400
Received: from [199.232.76.173] (helo=monty-python.gnu.org)
	by lists.gnu.org with esmtp (Exim 4.33) id 1BkrBx-0005p5-0N
	for bug-bison@gnu.org; Wed, 14 Jul 2004 17:21:29 -0400
Received: from [128.117.8.223] (helo=niwot.scd.ucar.edu)
	by monty-python.gnu.org with esmtp (Exim 4.34) id 1Bkr94-0005bC-0g
	for bug-bison@gnu.org; Wed, 14 Jul 2004 17:18:30 -0400
Received: from [128.117.10.166] (kalopani.scd.ucar.edu [128.117.10.166])
	by niwot.scd.ucar.edu (8.11.7p1+Sun/8.9.1) with ESMTP id i6ELIT922683
	for <bug-bison@gnu.org>; Wed, 14 Jul 2004 15:18:29 -0600 (MDT)
Mime-Version: 1.0 (Apple Message framework v618)
Content-Transfer-Encoding: 7bit
Message-Id: <595944F0-D5DB-11D8-B104-000393AA0836@ucar.edu>
Content-Type: text/plain; charset=US-ASCII; format=flowed
To: bug-bison@gnu.org
From: jeph Cowan <jeph@ucar.edu>
Date: Wed, 14 Jul 2004 15:18:28 -0600
X-Mailer: Apple Mail (2.618)
Subject: AIX compile problems
X-BeenThere: bug-bison@gnu.org
X-Mailman-Version: 2.1.5
Precedence: list
List-Id: "Bug reports for Bison, the GNU parser generator" <bug-bison.gnu.org>
List-Unsubscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=unsubscribe>
List-Archive: <http://lists.gnu.org/pipermail/bug-bison>
List-Post: <mailto:bug-bison@gnu.org>
List-Help: <mailto:bug-bison-request@gnu.org?subject=help>
List-Subscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=subscribe>
X-List-Received-Date: Wed, 14 Jul 2004 21:21:31 -0000

Hi,

I just got bison-1.875 installed on one of our AIX 5.1 systems after 
doing a few undocumented dance steps.

I modified /usr/include/sys/context.h with the following:

   diff context.h.orig context.h
20a21,27
 > #ifndef KLUDGE
 > #define KLUDGE
 > typedef struct {
 >       unsigned long long ss_set[4];
 > } sigset64_t;
 > #endif
 >

Then in each of the three files:
   bison-1.875/src/muscle_tab.c
   bison-1.875/src/symtab.c
   bison-1.875/src/uniqstr.c

included the line:

   #include <stdlib.h>

near the top.

I hope this helps someone having build problems on AIX.

Regards... -jeph

----------------------------------------------
jeph Cowan
jeph at ucar dot edu
Supercomputer Systems Group
National Center for Atmospheric Research (NCAR)




From MAILER-DAEMON Thu Jul 15 15:53:56 2004
Received: from mailman by lists.gnu.org with archive (Exim 4.33)
	id 1BlCIl-0008A4-Q7
	for mharc-bug-bison@gnu.org; Thu, 15 Jul 2004 15:53:55 -0400
Received: from mailman by lists.gnu.org with tmda-scanned (Exim 4.33)
	id 1BlCIj-00087s-J7
	for bug-bison@gnu.org; Thu, 15 Jul 2004 15:53:53 -0400
Received: from exim by lists.gnu.org with spam-scanned (Exim 4.33)
	id 1BlCIh-00086e-LS
	for bug-bison@gnu.org; Thu, 15 Jul 2004 15:53:53 -0400
Received: from [199.232.76.173] (helo=monty-python.gnu.org)
	by lists.gnu.org with esmtp (Exim 4.33) id 1BlCIh-00086U-Ix
	for bug-bison@gnu.org; Thu, 15 Jul 2004 15:53:51 -0400
Received: from [192.11.226.163] (helo=hoemail2.lucent.com)
	by monty-python.gnu.org with esmtp (Exim 4.34) id 1BlCG8-00015X-D1
	for bug-bison@gnu.org; Thu, 15 Jul 2004 15:51:12 -0400
Received: from ihmail.ih.lucent.com (h135-1-218-70.lucent.com [135.1.218.70])
	by hoemail2.lucent.com (8.12.11/8.12.11) with ESMTP id i6FJp2oH001273
	for <bug-bison@gnu.org>; Thu, 15 Jul 2004 14:51:03 -0500 (CDT)
Received: from static.ih.lucent.com (static.ih.lucent.com [135.185.166.118])
	by ihmail.ih.lucent.com (8.11.7+Sun/EMS-1.5 sol2)
	id i6FJp1d11743; Thu, 15 Jul 2004 14:51:02 -0500 (CDT)
Received: from static.ih.lucent.com (localhost [127.0.0.1])
	by static.ih.lucent.com (8.12.8/8.9.3) with ESMTP id i6FJp2jR019881
	for <bug-bison@gnu.org>; Thu, 15 Jul 2004 14:51:02 -0500
Received: (from psfales@localhost)
	by static.ih.lucent.com (8.12.8/8.12.8/Submit) id i6FJp2QP019879
	for bug-bison@gnu.org; Thu, 15 Jul 2004 14:51:02 -0500
Date: Thu, 15 Jul 2004 14:51:02 -0500
From: Peter Fales <psfales@lucent.com>
To: bug-bison@gnu.org
Message-ID: <20040715195102.GA19845@lucent.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
User-Agent: Mutt/1.4.1i
Subject: bison core dump
X-BeenThere: bug-bison@gnu.org
X-Mailman-Version: 2.1.5
Precedence: list
List-Id: "Bug reports for Bison, the GNU parser generator" <bug-bison.gnu.org>
List-Unsubscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=unsubscribe>
List-Archive: <http://lists.gnu.org/pipermail/bug-bison>
List-Post: <mailto:bug-bison@gnu.org>
List-Help: <mailto:bug-bison-request@gnu.org?subject=help>
List-Subscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=subscribe>
X-List-Received-Date: Thu, 15 Jul 2004 19:53:53 -0000

A user reported that the following bison program causes a segmentation 
violation  (this is a stripped down example from the real program):

%token TOK_HELLO                               
%destructor { foo; } TOK_HELLO
%%                            
cmd: TOK_HELLO ;

Using bison-1.875, this example fails on Linux, Solaris, and other
platforms.   The sitution is slightly improved in 1.875a, where it
runs on Linux, but still crashes on Solaris.  Further investigation 
shows that around line 410 of output.c, a NULL parameter is being 
passed for the last %s argument to fprintf.  The Linux fprint can handle
this (it just prints "(null)"), but on other platforms, it causes a
core dump. 

-- 
Peter Fales			  Lucent Technologies, Room 1C-436
N9IYJ            		  2000 N Naperville Rd PO Box 3033
internet: psfales@lucent.com	  Naperville, IL 60566-7033
			 	  work:	(630) 979-8031



From MAILER-DAEMON Mon Jul 19 04:57:52 2004
Received: from mailman by lists.gnu.org with archive (Exim 4.33)
	id 1BmTy4-0006Rr-Pm
	for mharc-bug-bison@gnu.org; Mon, 19 Jul 2004 04:57:52 -0400
Received: from mailman by lists.gnu.org with tmda-scanned (Exim 4.33)
	id 1BmTy3-0006RO-Cf
	for bug-bison@gnu.org; Mon, 19 Jul 2004 04:57:51 -0400
Received: from exim by lists.gnu.org with spam-scanned (Exim 4.33)
	id 1BmTy2-0006Qy-2p
	for bug-bison@gnu.org; Mon, 19 Jul 2004 04:57:50 -0400
Received: from [199.232.76.173] (helo=monty-python.gnu.org)
	by lists.gnu.org with esmtp (Exim 4.33) id 1BmTy1-0006Qv-VE
	for bug-bison@gnu.org; Mon, 19 Jul 2004 04:57:50 -0400
Received: from [212.124.160.13] (helo=vreme.yubc.net)
	by monty-python.gnu.org with esmtp (Exim 4.34) id 1BmTvE-0001PB-2s
	for bug-bison@gnu.org; Mon, 19 Jul 2004 04:54:56 -0400
Received: (from root@localhost)
	by vreme.yubc.net (8.11.6/8.11.6) id i6J8stX31403
	for bug-bison@gnu.org; Mon, 19 Jul 2004 10:54:55 +0200
Date: Mon, 19 Jul 2004 10:54:55 +0200
From: IPSI-2005 <hawaii2005@vreme.yubc.net>
Message-Id: <200407190854.i6J8stX31403@vreme.yubc.net>
To: bug-bison@gnu.org
Subject: Invitation to Hawaii (USA) and Amalfi (Italy) vip/ba
X-BeenThere: bug-bison@gnu.org
X-Mailman-Version: 2.1.5
Precedence: list
List-Id: "Bug reports for Bison, the GNU parser generator" <bug-bison.gnu.org>
List-Unsubscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=unsubscribe>
List-Archive: <http://lists.gnu.org/pipermail/bug-bison>
List-Post: <mailto:bug-bison@gnu.org>
List-Help: <mailto:bug-bison-request@gnu.org?subject=help>
List-Subscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=subscribe>
X-List-Received-Date: Mon, 19 Jul 2004 08:57:51 -0000

Dear potential Speaker:

This is an invitation for you to attend two IPSI BgD multidisciplinary and interdisciplinary conferences, one in Hawaii, and one in Amalfi, as follows:

IPSI-2005 HAWAII
Big Island Hawaii (arrival: 06.01.2005. departure: 09.01.2005.)
Deadlines: 1 October 2004 (abstract) + 30 October 2004 (full paper)

IPSI-2005 AMALFI
Amalfi, Italy (arrival: 17.02.2005. departure: 20.02.2005.)
Deadlines: 17 October 2004 (abstract) + 7 December 2004 (full papers)

If you like to obtain more information on both conferences, please reply to this email. All IPSI BgD conferences are non-profit! They bring together the elite of the world science (so far, 7 times a Nobel Laureate was talking at the opening ceremony), and they take place in the leading hotels of the world.

Topics of interest include, but are not limited to: Internet, Computer Science and Engineering, Management and Business Administration, Education, e-Medicine, Electrical Engineering, Bioengineering, Environment Protection, and e-Economy. These conferences are in line with the newest recommendations of NSF and EU to stress multidisciplinary, interdisciplinary, and transdisciplinary research, and truly support this type of scientific interraction.

Sincerely Yours,

Prof. V. Milutinovic, Chairman


PS - If you plan to submit an abstract/paper, let us know immediately. If you are not able to attend now, but you like to be informed about the future IPSI BgD conferences, please let us know. If you do not like to receive future invitations, let us know, as well!



From MAILER-DAEMON Tue Jul 20 18:58:51 2004
Received: from mailman by lists.gnu.org with archive (Exim 4.33)
	id 1Bn3ZT-0000Ec-0E
	for mharc-bug-bison@gnu.org; Tue, 20 Jul 2004 18:58:51 -0400
Received: from mailman by lists.gnu.org with tmda-scanned (Exim 4.33)
	id 1Bn3ZR-0000EI-FN
	for bug-bison@gnu.org; Tue, 20 Jul 2004 18:58:49 -0400
Received: from exim by lists.gnu.org with spam-scanned (Exim 4.33)
	id 1Bn3ZP-0000Dg-Sx
	for bug-bison@gnu.org; Tue, 20 Jul 2004 18:58:49 -0400
Received: from [199.232.76.173] (helo=monty-python.gnu.org)
	by lists.gnu.org with esmtp (Exim 4.33) id 1Bn3ZP-0000DW-Qp
	for bug-bison@gnu.org; Tue, 20 Jul 2004 18:58:47 -0400
Received: from [131.179.128.19] (helo=kiwi.cs.ucla.edu)
	by monty-python.gnu.org with esmtp (Exim 4.34) id 1Bn3WE-0003WI-IU
	for bug-bison@gnu.org; Tue, 20 Jul 2004 18:55:30 -0400
Received: from penguin.cs.ucla.edu (Penguin.CS.UCLA.EDU [131.179.64.200])
	by kiwi.cs.ucla.edu (8.11.7p1+Sun/8.11.7/UCLACS-5.2) with ESMTP id
	i6KMtSF10571; Tue, 20 Jul 2004 15:55:29 -0700 (PDT)
Received: from eggert by penguin.cs.ucla.edu with local (Exim 3.35 #1 (Debian))
	id 1Bn3WC-00056f-00; Tue, 20 Jul 2004 15:55:28 -0700
To: jeph Cowan <jeph@ucar.edu>
References: <595944F0-D5DB-11D8-B104-000393AA0836@ucar.edu>
From: Paul Eggert <eggert@CS.UCLA.EDU>
Date: Tue, 20 Jul 2004 15:55:28 -0700
In-Reply-To: <595944F0-D5DB-11D8-B104-000393AA0836@ucar.edu> (jeph Cowan's
	message of "Wed, 14 Jul 2004 15:18:28 -0600")
Message-ID: <87r7r6b867.fsf@penguin.cs.ucla.edu>
User-Agent: Gnus/5.1006 (Gnus v5.10.6) Emacs/21.3 (gnu/linux)
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Sender: Paul Eggert <eggert@penguin.cs.ucla.edu>
Cc: bug-bison@gnu.org
Subject: Re: AIX compile problems
X-BeenThere: bug-bison@gnu.org
X-Mailman-Version: 2.1.5
Precedence: list
List-Id: "Bug reports for Bison, the GNU parser generator" <bug-bison.gnu.org>
List-Unsubscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=unsubscribe>
List-Archive: <http://lists.gnu.org/pipermail/bug-bison>
List-Post: <mailto:bug-bison@gnu.org>
List-Help: <mailto:bug-bison-request@gnu.org?subject=help>
List-Subscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=subscribe>
X-List-Received-Date: Tue, 20 Jul 2004 22:58:49 -0000

Thanks for your bug report.  Unfortunately I don't have an AIX host to
use, so I'll have to ask for your help in fixing things.

One thing you might try is the latest Bison test release, to see
whether the AIX porting bugs are fixed there already: that might save
you some time.  <ftp://alpha.gnu.org/gnu/bison/bison-1.875d.tar.gz>

jeph Cowan <jeph@ucar.edu> writes:

> I modified /usr/include/sys/context.h with the following:
>
>    diff context.h.orig context.h
> 20a21,27
>  > #ifndef KLUDGE
>  > #define KLUDGE
>  > typedef struct {
>  >       unsigned long long ss_set[4];
>  > } sigset64_t;
>  > #endif
>  >

Can you please explain why this change was needed?  For example, what
error message did you get when you did not have this change installed?
(We'd prefer to have Bison work with the standard AIX headers.)

> Then in each of the three files:
>    bison-1.875/src/muscle_tab.c
>    bison-1.875/src/symtab.c
>    bison-1.875/src/uniqstr.c
>
> included the line:
>
>    #include <stdlib.h>
>
> near the top.

Can you please explain why these changes were needed too?  For
example, the first file that muscle_tab.c includes is "system.h", and
"system.h" includes <stdlib.h> near the top (after <limits.h>,
<stddef.h>, and <stdio.h>).  So why does it help to include <stdlib.h>
before "system.h"?  Does AIX 5.1 have a bug that requires you to
include stdlib.h before some other system header?



From MAILER-DAEMON Thu Jul 22 10:50:09 2004
Received: from mailman by lists.gnu.org with archive (Exim 4.33)
	id 1Bnetc-00035X-Sh
	for mharc-bug-bison@gnu.org; Thu, 22 Jul 2004 10:50:09 -0400
Received: from mailman by lists.gnu.org with tmda-scanned (Exim 4.33)
	id 1Bnetb-00034S-3e
	for bug-bison@gnu.org; Thu, 22 Jul 2004 10:50:07 -0400
Received: from exim by lists.gnu.org with spam-scanned (Exim 4.33)
	id 1BnetZ-00033f-Gt
	for bug-bison@gnu.org; Thu, 22 Jul 2004 10:50:06 -0400
Received: from [199.232.76.173] (helo=monty-python.gnu.org)
	by lists.gnu.org with esmtp (Exim 4.33)
	id 1BnetX-000336-EH; Thu, 22 Jul 2004 10:50:03 -0400
Received: from [131.179.128.19] (helo=kiwi.cs.ucla.edu)
	by monty-python.gnu.org with esmtp (Exim 4.34)
	id 1BneqD-0000mt-DZ; Thu, 22 Jul 2004 10:46:37 -0400
Received: from penguin.cs.ucla.edu (Penguin.CS.UCLA.EDU [131.179.64.200])
	by kiwi.cs.ucla.edu (8.11.7p1+Sun/8.11.7/UCLACS-5.2) with ESMTP id
	i6MEkXn18768; Thu, 22 Jul 2004 07:46:33 -0700 (PDT)
Received: from eggert by penguin.cs.ucla.edu with local (Exim 3.35 #1 (Debian))
	id 1Bneq5-0000wT-00; Thu, 22 Jul 2004 07:46:29 -0700
To: Peter Fales <psfales@lucent.com>
References: <20040715195102.GA19845@lucent.com>
From: Paul Eggert <eggert@CS.UCLA.EDU>
Date: Thu, 22 Jul 2004 07:46:29 -0700
In-Reply-To: <20040715195102.GA19845@lucent.com> (Peter Fales's message of
	"Thu, 15 Jul 2004 14:51:02 -0500")
Message-ID: <877jswje0q.fsf@penguin.cs.ucla.edu>
User-Agent: Gnus/5.1006 (Gnus v5.10.6) Emacs/21.3 (gnu/linux)
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Sender: Paul Eggert <eggert@penguin.cs.ucla.edu>
Cc: bug-bison@gnu.org, bison-patches@gnu.org
Subject: Re: bison core dump
X-BeenThere: bug-bison@gnu.org
X-Mailman-Version: 2.1.5
Precedence: list
List-Id: "Bug reports for Bison, the GNU parser generator" <bug-bison.gnu.org>
List-Unsubscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=unsubscribe>
List-Archive: <http://lists.gnu.org/pipermail/bug-bison>
List-Post: <mailto:bug-bison@gnu.org>
List-Help: <mailto:bug-bison-request@gnu.org?subject=help>
List-Subscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=subscribe>
X-List-Received-Date: Thu, 22 Jul 2004 14:50:07 -0000

Peter Fales <psfales@lucent.com> writes:

> A user reported that the following bison program causes a segmentation 
> violation  (this is a stripped down example from the real program):
>
> %token TOK_HELLO                               
> %destructor { foo; } TOK_HELLO
> %%                            
> cmd: TOK_HELLO ;

Thanks for that bug report.  It uncovered a combination of Bison
features that hasn't been tested, and had some other problems too.
I installed the following patch, which also adds some test cases.

2004-07-22  Paul Eggert  <eggert@cs.ucla.edu>

	Fix bug with non-%union parsers that have printers or destructors,
	which led to a Bison core dump.  Reported by Peter Fales in
	<http://lists.gnu.org/archive/html/bug-bison/2004-07/msg00014.html>.
	
	* data/c.m4 (b4_symbol_actions): Don't assume %union was used.
	* data/lalr1.cc (yystype) [defined YYSTYPE]: Define to YYSTYPE,
	not to our own type.
	* src/output.c (symbol_destructors_output, symbol_printers_output):
	Don't assume %union.
	* tests/actions.at (_AT_CHECK_PRINTER_AND_DESTRUCTOR,
	AT_CHECK_PRINTER_AND_DESTRUCTOR): New argument
	UNION-FLAG.  All callers changed.
	(_AT_CHECK_PRINTER_AND_DESTRUCTOR): Don't assume %union.
	Use type char, not unsigned int, when declaring an array of char;
	this lets us remove a cast.
	(Printers and Destructors): Add non-%union test cases.

Index: data/c.m4
===================================================================
RCS file: /cvsroot/bison/bison/data/c.m4,v
retrieving revision 1.22
diff -p -u -r1.22 c.m4
--- data/c.m4	31 Mar 2004 00:37:20 -0000	1.22
+++ data/c.m4	22 Jul 2004 14:37:26 -0000
@@ -327,7 +327,8 @@ m4_define([b4_syncline],
 #                   SYMBOL-ACTION, SYMBOL-TYPENAME)
 # -------------------------------------------------
 m4_define([b4_symbol_actions],
-[m4_pushdef([b4_dollar_dollar], [yyvaluep->$6])dnl
+[m4_pushdef([b4_dollar_dollar],
+   [m4_ifval([$6], [(yyvaluep->$6)], [(*yyvaluep)])])dnl
 m4_pushdef([b4_at_dollar], [(*yylocationp)])dnl
       case $4: /* $3 */
 b4_syncline([$2], [$1])
Index: data/lalr1.cc
===================================================================
RCS file: /cvsroot/bison/bison/data/lalr1.cc,v
retrieving revision 1.46
diff -p -u -r1.46 lalr1.cc
--- data/lalr1.cc	21 Jun 2004 20:20:30 -0000	1.46
+++ data/lalr1.cc	22 Jul 2004 14:37:26 -0000
@@ -161,7 +161,9 @@ b4_syncline([@oline@], [@ofile@])[
 # define YYERROR_VERBOSE ]b4_error_verbose[
 #endif
 
-#ifndef YYSTYPE
+#ifdef YYSTYPE
+typedef YYSTYPE yystype;
+#else
 ]m4_ifdef([b4_stype],
 [b4_syncline([b4_stype_line], [b4_filename])
 typedef union b4_stype yystype;
Index: src/output.c
===================================================================
RCS file: /cvsroot/bison/bison/src/output.c,v
retrieving revision 1.226
diff -p -u -r1.226 output.c
--- src/output.c	21 Jun 2004 20:20:31 -0000	1.226
+++ src/output.c	22 Jul 2004 14:37:26 -0000
@@ -402,16 +402,18 @@ symbol_destructors_output (FILE *out)
 
 	/* Filename, lineno,
 	   Symbol-name, Symbol-number,
-	   destructor, typename. */
+	   destructor, optional typename.  */
 	fprintf (out, "%s[", sep);
 	sep = ",\n";
 	escaped_file_name_output (out, sym->destructor_location.start.file);
-	fprintf (out, ", [[%d]], [[%s]], [[%d]], [[%s]], [[%s]]]",
+	fprintf (out, ", [[%d]], [[%s]], [[%d]], [[%s]]",
 		 sym->destructor_location.start.line,
 		 sym->tag,
 		 sym->number,
-		 sym->destructor,
-		 sym->type_name);
+		 sym->destructor);
+	if (sym->type_name)
+	  fprintf (out, ", [[%s]]", sym->type_name);
+	fputc (']', out);
       }
   fputs ("])\n\n", out);
 }
@@ -435,16 +437,18 @@ symbol_printers_output (FILE *out)
 
 	/* Filename, lineno,
 	   Symbol-name, Symbol-number,
-	   printer, typename. */
+	   printer, optional typename.  */
 	fprintf (out, "%s[", sep);
 	sep = ",\n";
 	escaped_file_name_output (out, sym->printer_location.start.file);
-	fprintf (out, ", [[%d]], [[%s]], [[%d]], [[%s]], [[%s]]]",
+	fprintf (out, ", [[%d]], [[%s]], [[%d]], [[%s]]",
 		 sym->printer_location.start.line,
 		 sym->tag,
 		 sym->number,
-		 sym->printer,
-		 sym->type_name);
+		 sym->printer);
+	if (sym->type_name)
+	  fprintf (out, ", [[%s]]", sym->type_name);
+	fputc (']', out);
       }
   fputs ("])\n\n", out);
 }
Index: tests/actions.at
===================================================================
RCS file: /cvsroot/bison/bison/tests/actions.at,v
retrieving revision 1.32
diff -p -u -r1.32 actions.at
--- tests/actions.at	30 May 2004 00:56:55 -0000	1.32
+++ tests/actions.at	22 Jul 2004 14:37:26 -0000
@@ -304,13 +304,13 @@ AT_CLEANUP
 ## Printers and Destructors.  ##
 ## -------------------------- ##
 
-# _AT_CHECK_PRINTER_AND_DESTRUCTOR($1, $2, $3, $4, BISON-DIRECTIVE)
-# -----------------------------------------------------------------
+# _AT_CHECK_PRINTER_AND_DESTRUCTOR($1, $2, $3, $4, BISON-DIRECTIVE, UNION-FLAG)
+# -----------------------------------------------------------------------------
 m4_define([_AT_CHECK_PRINTER_AND_DESTRUCTOR],
 [m4_if([$1$2$3], $[1]$[2]$[3], [],
        [m4_fatal([$0: Invalid arguments: $@])])dnl
 
-AT_SETUP([Printers and Destructors: $5])
+AT_SETUP([Printers and Destructors $6: $5])
 
 # Make sure complex $n work.
 
@@ -328,18 +328,19 @@ AT_DATA_GRAMMAR([[input.y]],
 %debug
 %verbose
 %locations
-%union
+]m4_ifval([$6], [%union
 {
   int ival;
-}
-
+}])
+[
 %{
-]AT_LALR1_CC_IF([typedef yy::Location YYLTYPE;])
+]AT_LALR1_CC_IF([typedef yy::Location YYLTYPE;
+m4_ifval([$6], , [#define YYSTYPE int])])
 [static int yylex (]AT_LEX_FORMALS[);
 ]AT_LALR1_CC_IF([], [static void yyerror (const char *msg);])
 [%}
 
-%type <ival> 'x' ';' thing line input
+]m4_ifval([$6], [%type <ival> 'x' ';' thing line input])[
 
 %printer { fprintf (yyoutput, "%d@%d-%d", $$, RANGE (@$)); }
    input line thing 'x'
@@ -416,7 +417,7 @@ thing:
 static int
 yylex (]AT_LEX_FORMALS[)
 {
-  static const unsigned int input[] =
+  static const char input[] =
     {
       /* Exercise the discarding of stack top and input until `error'
          can be reduced.  */
@@ -433,21 +434,21 @@ yylex (]AT_LEX_FORMALS[)
   if (counter < (sizeof(input) / sizeof (input[0])))
     {
 ]AT_LALR1_CC_IF(
-[       yylval->ival = counter;
+[       int c = m4_ifval([$6], [yylval->ival], [*yylval]) = counter++;
        /* As in BASIC, line numbers go from 10 to 10.  */
-       yylloc->begin.line = yylloc->begin.column = 10 * counter;
+       yylloc->begin.line = yylloc->begin.column = 10 * c;
        yylloc->end.line = yylloc->end.column = yylloc->begin.line + 9;
        printf ("sending: '%c' (%d@%d-%d)\n",
-               input[[counter]], yylval->ival, RANGE (*yylloc));
-       return (int) input[[counter++]];
+               input[[c]], c, RANGE (*yylloc));
+       return input[[c]];
 ],
-[       yylval.ival = counter;
+[       int c = m4_ifval([$6], [yylval.ival], [yylval]) = counter++;
        /* As in BASIC, line numbers go from 10 to 10.  */
-       yylloc.first_line = yylloc.first_column = 10 * counter;
+       yylloc.first_line = yylloc.first_column = 10 * c;
        yylloc.last_line = yylloc.last_column = yylloc.first_line + 9;
        printf ("sending: '%c' (%d@%d-%d)\n",
-               input[[counter]], yylval.ival, RANGE (yylloc));
-       return (int) input[[counter++]];
+               input[[c]], c, RANGE (yylloc));
+       return input[[c]];
 ])[
     }
   else
@@ -547,16 +548,20 @@ AT_CLEANUP
 ])
 
 
-# AT_CHECK_PRINTER_AND_DESTRUCTOR([BISON-OPTIONS])
-# ------------------------------------------------
+# AT_CHECK_PRINTER_AND_DESTRUCTOR([BISON-OPTIONS], [UNION-FLAG])
+# --------------------------------------------------------------
 # Produce `calc.y'.
 m4_define([AT_CHECK_PRINTER_AND_DESTRUCTOR],
-[_AT_CHECK_PRINTER_AND_DESTRUCTOR($[1], $[2], $[3], $[4], [$1])
+[_AT_CHECK_PRINTER_AND_DESTRUCTOR($[1], $[2], $[3], $[4], [$1], [$2])
 ])
 
 
-AT_CHECK_PRINTER_AND_DESTRUCTOR()
+AT_CHECK_PRINTER_AND_DESTRUCTOR([])
+AT_CHECK_PRINTER_AND_DESTRUCTOR([], [with union])
 AT_CHECK_PRINTER_AND_DESTRUCTOR([%locations %defines %skeleton "lalr1.cc"])
+AT_CHECK_PRINTER_AND_DESTRUCTOR([%locations %defines %skeleton "lalr1.cc"],
+			        [with union])
 
-# FIXME.  This test case fails.
+# FIXME.  These test cases fail.
 #AT_CHECK_PRINTER_AND_DESTRUCTOR([%glr-parser])
+#AT_CHECK_PRINTER_AND_DESTRUCTOR([%glr-parser], [with union])



From MAILER-DAEMON Thu Jul 22 12:30:13 2004
Received: from mailman by lists.gnu.org with archive (Exim 4.33)
	id 1BngST-0007N4-7z
	for mharc-bug-bison@gnu.org; Thu, 22 Jul 2004 12:30:13 -0400
Received: from mailman by lists.gnu.org with tmda-scanned (Exim 4.33)
	id 1BngSR-0007My-Pz
	for bug-bison@gnu.org; Thu, 22 Jul 2004 12:30:12 -0400
Received: from exim by lists.gnu.org with spam-scanned (Exim 4.33)
	id 1BngSG-0007It-FQ
	for bug-bison@gnu.org; Thu, 22 Jul 2004 12:30:11 -0400
Received: from [199.232.76.173] (helo=monty-python.gnu.org)
	by lists.gnu.org with esmtp (Exim 4.33) id 1BngSG-0007Ih-B4
	for bug-bison@gnu.org; Thu, 22 Jul 2004 12:30:00 -0400
Received: from [192.91.197.8] (helo=mailgw.chips.ibm.com)
	by monty-python.gnu.org with esmtp (Exim 4.34) id 1BngOr-0006bP-3b
	for bug-bison@gnu.org; Thu, 22 Jul 2004 12:26:34 -0400
Received: from pop-server1.btv.ibm.com (pop-server1.btv.ibm.com [9.61.34.106])
	by mailgw.chips.ibm.com (8.12.10/8.12.10) with ESMTP id
	i6MGQCFW189050; Thu, 22 Jul 2004 12:26:12 -0400
Received: from edamail.fishkill.ibm.com (edamail.fishkill.ibm.com
	[9.62.113.64])
	by pop-server1.btv.ibm.com (8.12.10/8.12.10) with ESMTP id
	i6MGQArD134624; Thu, 22 Jul 2004 12:26:10 -0400
Received: from linux-009062246201.fishkill.ibm.com ([9.62.246.201]) by
	edamail.fishkill.ibm.com (AIX4.3/8.9.3p2/8.7/EDA-fsh-1.0) with
	ESMTP id MAA33604; Thu, 22 Jul 2004 12:26:10 -0400
From: Florian Krohm <florian@edamail.fishkill.ibm.com>
To: bug-bison@gnu.org
Date: Thu, 22 Jul 2004 12:25:48 -0400
User-Agent: KMail/1.6.2
References: <595944F0-D5DB-11D8-B104-000393AA0836@ucar.edu>
In-Reply-To: <595944F0-D5DB-11D8-B104-000393AA0836@ucar.edu>
MIME-Version: 1.0
Content-Disposition: inline
Content-Type: Multipart/Mixed;
  boundary="Boundary-00=_Mq+/Aa+GvtrbWvx"
Message-Id: <200407221225.48891.florian@edamail.fishkill.ibm.com>
Cc: jeph Cowan <jeph@ucar.edu>
Subject: Re: AIX compile problems
X-BeenThere: bug-bison@gnu.org
X-Mailman-Version: 2.1.5
Precedence: list
List-Id: "Bug reports for Bison, the GNU parser generator" <bug-bison.gnu.org>
List-Unsubscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=unsubscribe>
List-Archive: <http://lists.gnu.org/pipermail/bug-bison>
List-Post: <mailto:bug-bison@gnu.org>
List-Help: <mailto:bug-bison-request@gnu.org?subject=help>
List-Subscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=subscribe>
X-List-Received-Date: Thu, 22 Jul 2004 16:30:12 -0000


--Boundary-00=_Mq+/Aa+GvtrbWvx
Content-Type: text/plain;
  charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

I just built bison-1.875 on AIX 5.1.0.0 using VisualAge 6.0.0.5
xlc with default stanza. make, make check, make install all work fine
without any errors.
I'm attaching the config.log for that build.

Florian


On Wednesday 14 July 2004 17:18, jeph Cowan wrote:
> Hi,
>
> I just got bison-1.875 installed on one of our AIX 5.1 systems after
> doing a few undocumented dance steps.
>
> I modified /usr/include/sys/context.h with the following:
>
>    diff context.h.orig context.h
> 20a21,27
>
>  > #ifndef KLUDGE
>  > #define KLUDGE
>  > typedef struct {
>  >       unsigned long long ss_set[4];
>  > } sigset64_t;
>  > #endif
>
> Then in each of the three files:
>    bison-1.875/src/muscle_tab.c
>    bison-1.875/src/symtab.c
>    bison-1.875/src/uniqstr.c
>
> included the line:
>
>    #include <stdlib.h>
>
> near the top.
>
> I hope this helps someone having build problems on AIX.
>
> Regards... -jeph
>
> ----------------------------------------------
> jeph Cowan
> jeph at ucar dot edu
> Supercomputer Systems Group
> National Center for Atmospheric Research (NCAR)

--Boundary-00=_Mq+/Aa+GvtrbWvx
Content-Type: text/x-log;
  charset="iso-8859-1";
  name="config.log"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
	filename="config.log"

This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.

It was created by GNU Bison configure 1.875, which was
generated by GNU Autoconf 2.57.  Invocation command line was

  $ ./configure --prefix=/afs/eda/u/florian/tmp

## --------- ##
## Platform. ##
## --------- ##

hostname = comserv706.fishkill.ibm.com
uname -m = 00078B8F4C00
uname -r = 1
uname -s = AIX
uname -v = 5

/usr/bin/uname -p = powerpc
/bin/uname -X     = unknown

/bin/arch              = unknown
/usr/bin/arch -k       = unknown
/usr/convex/getsysinfo = unknown
hostinfo               = unknown
/bin/machine           = unknown
/usr/bin/oslevel       = 5.1.0.0
/bin/universe          = unknown

PATH: .
PATH: /afs/eda/u/florian/local/bin
PATH: /afs/eda/prod/tools/9.1/apps/beam/bin
PATH: /afs/eda/prod/tools/9.1/bin
PATH: /afs/eda/tools/gnu/bin
PATH: /afs/eda/tools/bin
PATH: /usr/ibmcxx/bin
PATH: /afs/eda/u/synlib/bin
PATH: /usr/bin
PATH: /usr/bin/X11
PATH: /bin
PATH: /usr/afsws/bin
PATH: /usr/lpp/cmvc/bin
PATH: /afs/eda/@sys/prod/bin


## ----------- ##
## Core tests. ##
## ----------- ##

configure:1336: checking for a BSD-compatible install
configure:1390: result: config/install-sh -c
configure:1401: checking whether build environment is sane
configure:1444: result: yes
configure:1477: checking for gawk
configure:1493: found /afs/eda/tools/gnu/bin/gawk
configure:1503: result: gawk
configure:1513: checking whether make sets $(MAKE)
configure:1533: result: yes
configure:1738: checking for gcc
configure:1764: result: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc
configure:2008: checking for C compiler version
configure:2011: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc --version </dev/null >&5
/afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc: 1501-216 command option -version is not recognized - passed to ld
  C for AIX Compiler, Version 5

  Usage:
     xlc [ option | inputfile ]...
     cc [ option | inputfile ]...
     c89 [ option | inputfile ]...
     xlc128 [ option | inputfile ]...
     cc128 [ option | inputfile ]...
     xlc_r [ option | inputfile ]...
     cc_r [ option | inputfile ]...
     xlc_r4 [ option | inputfile ]...
     cc_r4 [ option | inputfile ]...
     xlc_r7 [ option | inputfile ]...
     cc_r7 [ option | inputfile ]...

  Description:
     The xlc and related commands compile C source files.
     They also processes assembler source files and object files. Unless the
     -c option is specified, xlc calls the linkage editor to produce a
     single object file. Input files may be any of the following:
       1. file name with .c suffix: C source file
       2. file name with .i suffix: preprocessed C source file
       3. file name with .so suffix: shared object file
       4. file name with .o suffix: object file for ld command
       5. file name with .s suffix: assembler source file

  Options:
     Options can be flag options or keyword options:

       1. Flag options:

        -#        Display language processing commands but do
                  not invoke them; output goes to stdout.
        -bdynamic, -bstatic
                  Determines which types of library files are searched by
                  the linkage editor.
        -brtl     Tells the linkage editor to accept both .so and .a
                  library file types.
        -B<prefix>
                  Construct alternate compiler/assembler/linkage editor
                  program names. <prefix> is added to the beginning of
                  the standard program names.
        -c        Do not send object files to the linkage editor.
        -C        Write comments to output when doing preprocessing,
                  used with -E and -P.
        -D<name>[=<def>]
                  Define <name> as in #define directive. If <def> is
                  not specified, 1 is assumed.
        -E        Preprocess but do not compile; output goes to stdout
        -f<filename>
                  Passes to the linkage editor the filename of a file
                  containing a list of input files to be processed.
        -F<x>[:<stanza>]
                  Use alternate configuration file <x> with optional
                  <stanza>. If <stanza> is not specified, the assumed stanza 
                  is the name of the command used to invoke the compiler. 
        -g        Produce information for the debugger.
        -G        Tells the linkage editor to create a dynamic library.
        -I<dir>   Search in directory <dir> for include files that
                  do not start with an absolute path.
        -l<key>   Search the specified library file,
                  where <key> selects the file lib<key>.a.
        -L<dir>   Search in directory <dir> for files specified by -l<key>.
        -ma       Generate inline calls to the "alloca" function as if
                  "#pragma alloca" directives were in the source file.
        -M        Generate information to be included in a "make"
                  description file; output goes to .u file.
        -o<name>  Name the executable file <name> instead of a.out.
                  When used with the -c option and one source file,
                  name the object file <name> instead of filename.o.
                  If <name> is the name of a directory, files generated by
                  the compiler will be placed into that directory.
        -O        Optimize generated code.
        -O2       Same as -O.
        -O3       Perform some memory and compile time intensive
                  optimizations in addition to those executed with -O2.
                  The -O3 specific optimizations have the potential to
                  alter the semantics of a user's program.
                  The compiler guards against these optimizations at -O2
                  and the option -qstrict is provided at -O3 to turn off
                  these aggressive optimizations.
        -O4       Equivalent to -O3 -qipa with automatic generation of
                  architecture and tuning option ideal for that platform.
        -O5       Equivalent to -O3 -qipa=level=2 with automatic generation of
                  architecture and tuning option ideal for that platform.
        -p        Generate profiling support code.  Same as -qprofile=p.
        -pg       Generate profiling support code including BSD
                  profiling support.  Same as -qprofile=pg.
        -P        Preprocess but do not compile; output goes to .i file.
        -Q<x>, -qinline<x>
                  Inline all appropriate functions where x can be
                  one of the following:
                    !       Not inline any function (equivalent to -qnoinline)
                    =<lc>   Inline if number of source statement in
                            function is less than the number specified
                            in <lc>.
                    -<nm>   Not inline function listed by names in <nm>
                    +<nm>   Attempt to inline function listed by names
                            in <nm>.
        -r        Produce the output file without linking any library.
        -S        Produce a .s file for any source file processed by the
                  compiler.
        -t<x>     Apply prefix from the -B option to the specified program <x>,
                  where x can be one or more of the following:
                    p = preprocessor
                    c = compiler frontend
                    b = compiler backend
                    i = compiler inliner
                    a = assembler
                    l = linkage editor
                    I = inter-procedural analysis - compile phase
                    L = inter-procedural analysis - link phase.
        -U<name>  Undefine name as in #undef directive.
        -v        Displays language processing commands as they
                  are invoked by xlc; output goes to stdout.
        -w        Suppress informational, language-level, and
                  warning messages.
        -W<x,y>   Give the options <y> to the compiler program <x>
                  where x can be one or more of the following:
                    <p,c,b,i,a,l,I,L,m>
        -y<x>     Specify compile-time rounding of constant floating-point
                  expressions, where <x> can be one of the following:
                    n = round to nearest
                    m = round toward minus infinity
                    p = round toward positive infinity
                    z = round toward zero.

       2. Keyword options:

          Keyword options are specified in one of the following ways:

          -q<option>
          -q<option>=<parameter>
          -q<option>=<parameter>:<parameter>

          where <option> is an option name and <parameter> is a
          parameter value.
          Keyword options with no parameters represent switches
          that may be either on or off. The keyword by itself turns
          the switch on, and the keyword preceded by the letters NO
          turns the switch off. For example, -qLIST tells the
          compiler to produce a listing and -qNOLIST tells the
          compiler not to produce a listing. If an option that
          represents a switch is set more than once, the compiler
          uses the last setting.

          Keyword option and parameter names may appear in either
          UPPER CASE or lower case letters in the xlc command.


          Options without parameters:

          32          Selects 32-bit compiler mode.
          64          Selects 64-bit compiler mode.
          ansialias   Use type-based aliasing during optimization.
          attr        Produce an attribute listing containing only
                      referenced names; output goes to .lst file.
          compact     Reduce code size where possible, at the expense
                      of execution speed.  Code size is reduced by
                      inhibiting optimizations that replicate or expand
                      code inline.
          cpluscmt    Permit "//" to introduce a comment that lasts
                      until the end of the current source line, as in C++.
          dbcs        String literals and comments can contain DBCS
                      characters (same as mbcs option).
          dbxextra    Generate symbol table information for unreferenced
                      variables. By default such information is not generated
                      thus reducing the size of the executable compiled with
                      the "-g" option.  Same as -qsymtab=unref.
          digraph     Allow special digraph
          dollar      Allow '$' as an identifier character
          dpcl        Generates symbols for tools based on the Dynamic
                      Probe Class Library (DPCL)
          extchk      Perform external name type-checking and function
                      call checking.
          fdpr        Collect information about programs for use with
                      the AIX fdpr (Feedback Directed Program Restructuring)
                      performance-tuning utility.
          funcsect    Place instructions for each function in a separate csect.
          flttrap     Generate instructions to trap floating-point
                      exceptions.
          fold        Specifies that constant floating-point expressions
                      are to be evaluated at compile time.
          fullpath    Specifies the path information stored for files when
                      you use "-g" and the symbolic debugger.
          heapdebug   Enables debug versions of memory management functions.
          idirfirst   Specify the search order for files included with
                      the #include "file_name" directive.  Use -qidirfirst
                      with the -Idirectory option.  If -qidirfirst option
                      is specified, the directories specified by the
                      -Idirectory option are searched before the directory
                      where the current file resides.
          ignerrno    Tell the optimizer that the program will never
                      refer to or set errno.  This allows additional
                      optimizations.
          inlglue     Generate fast external linkage by inlining the
                      code (pointer glue code) necessary at calls
                      via a function pointer and calls to external
                      procedures.
          ldbl128     Increase long double size from 64 to 128 bits.
          libansi     Assumes that all functions with the name of an
                      ANSI C library functions are in fact the system functions.
          linedebug   Generates abbreviated line number and source file name
                      information for the debugger.
          list        Produce an object listing; output goes to .lst file.
          listopt     Display the settings of all options; output goes
                      to .lst file.
          longdouble  Increase long double size from 64 to 128 bits.
          longlit     Changes implicit type selection for integer constants in
                      64-bit mode.
          longlong    Allow long long integers.
          macpstr     Allow '\p' as the first character of a string constant
                      which will be replaced by the length in bytes.
          makedep     Creates an output file that contains targets suitable for
                      inclusion in a description file for the AIX make command.
          mbcs        String literals and comments can contain DBCS
                      characters (same as dbcs option).
          mkshrobj    Create a shared object from generated object files.
          noprint     Direct listing to /dev/null.
          nostdinc    Specify which files are included with the #include
                      "file_name" and #include <file_name> directives.
                      If -qnostdinc is specified, the /usr/include directory
                      is not searched.
          once        Only process each include file one time.
                      The default is -qnoonce.
          optimize    Same as O and O2. Perform optimization that is the
                      mix between speed and size.  (If -qnooptimize is
                      specified, it is equivalent to -qoptimize=0.)
          pascal      Accept and ignore the keyword 'pascal' as a
                      type modifier.
          pdf1, pdf2  Perform aggressive optimizations with profile
                      directed feedback.
          phsinfo     Produce compiler phase information; output goes to
                      stdout.
          proto       Assert that procedure call points agree
                      with their declarations even if the procedure has
                      not been prototyped. This allows the caller to
                      pass floating point arguments in floating point
                      registers instead of general purpose registers.
          ro          Put string literals in read only area.
          roconst     Put constant values in read only area.
          showinc     Include the source of all included files in the
                      source listing, if the SOURCE option is in effect.
          source      Produce a source listing; output goes to .lst file.
          srcmsg      Reconstruct source lines in error along with the
                      diagnostic messages in the stderr file.
          statsym     Adds user-defined, nonexternal names that have a
                      persistent storage class, such as initialized and
                      uninitialized static variables, to the name list
                      (the symbol table of xcoff objects).  Same as
                      -qsymtab=static.
          strict      Turns off aggresive optimizations which have the
                      potential to alter the semantics of a user's program.
                      This option also sets -qfloat=nofltint:norsqrt.
          strict_induction
                      Turns off induction variable optimizations
                      that have the potential to alter the semantics of a
                      user's program. The default is "nostrict_induction" at
                      -O2 or higher and "strict_induction" otherwise.
                      "nostrict_induction" is recomended if your program does
                      not have overflows or wrap arounds of loop induction
                      variables.
          syntaxonly  Causes the compiler to perform syntax checking without
                      generating an object file.
          threaded    Indicates to the compiler that the program will execute
                      in multi-threaded environment.
          upconv      Preserves the unsigned specification when performing
                      integral promotions.
          warn64      Enables checking for possible long-to-integer or
                      pointer-to-integer truncation.
          xcall       Generate code to static routines within a compilation
                      unit as if they were external routines.
          xref        Produce a cross-reference listing containing
                      only referenced names.


          Options with parameters:
          aggrcopy=[no]overlap
                      Asserts whether source and destination of aggregate
                      assignments overlap.
          alias=<option>
                      Specifies the aliasing assertion to be applied to
                      your compilation unit.
                      The available options are:
                      typ     Pointers to different types are never aliased.
                      allp    Pointers are never aliased.
                      addr    Variables are disjoint from pointers
                              unless their address is taken.
                      ansi    Pointers can only point to an object of the
                              same type. Require -O option.
          align=<algnopt>
                      power   The compiler uses the RISC System/6000
                              alignment rules.
                      full    The compiler uses the RISC System/6000
                              alignment rules. This is the same as power.
                      mac68k  The compiler uses the Macintosh**
                              alignment rules.
                      twobyte The compiler uses the Macintosh alignment rules.
                              The mac68k option is the same as twobyte.
                      packed  The compiler uses the packed alignment rules.
                      natural The compiler maps structure members to
                              their natural boundaries.
                      bit_packed
                              The same as packed. In addition, bit-fields are
                              packed as tight as possible.
          arch=<option>
                      Specifies the architecture on which the executable
                      program will be run.
                      The available options are:
                      com     Produce an object that contains instructions
                              that will run on all the POWER and PowerPC
                              hardware platforms.
                      pwr     Produce an object that contains instructions
                              that will run on the POWER hardware
                              platform.
                      pwr2    Produce an object that contains instructions
                              that will run on the POWER2 hardware
                              platform.
                      pwrx    Same as pwr2.
                      ppc     Produce an object that contains instructions
                              that will run on any of the 32-bit PowerPC
                              hardware platforms.
                      ppcgr   Produce an object that contains optional
                              graphics instructions for PowerPC processors.
                      pwr2s   Produce an object that contains instructions
                              that will run on a pwr2s chip.
                      p2sc    Produce an object that contains instructions
                              that will run on a p2sc chip.
                      601     Produce an object that contains instructions
                              that will run on a 601 chip.
                      602     Produce an object that contains instructions
                              that will run on a 602 chip.
                      603     Produce an object that contains instructions
                              that will run on a 603 chip.
                      604     Produce an object that contains instructions
                              that will run on a 604 chip.
                      403     Produce an object that contains instructions
                              that will run on a 403 chip.
                      rs64a   Produce an object that contains instructions
                              that will run on a rs64a chip.
                      rs64b   Produce an object that contains instructions
                              that will run on a rs64b chip.
                      rs64c   Produce an object that contains instructions
                              that will run on a rs64c chip.
                      pwr3    Produce an object that contains instructions
                              that will run on a POWER3 chip.
                      The default is -qarch=com.  If the -qarch option is
                      specified without the -qtune=<option>, the compiler
                      uses the default -qtune value for the specified 
                      architecture. Refer to online documentation to find
                      actual default setting of -qtune  for a given -qarch.
          assert=<option>
                      Specifies the aliasing assertion to be applied to
                      your compilation unit.
                      The available options are:
                      typ     Pointers to different types are never aliased.
                      allp    Pointers are never aliased.
                      addr    Variables are disjoint from pointers
                              unless their address is taken.
          attr=full   Produce an attribute listing containing all names,
                      whether referenced or not; output goes to .lst file.
          bitfields=signed
          bitfields=unsigned
                      Specify whether bitfields will be signed or unsigned.
          cache=<suboption>:<suboption>...
                      Describe the cache configuration for a specific target
                      execution machine. See online documentation for details.
          chars=signed
          chars=unsigned
                      Specify whether the data type char will be signed
                      or unsigned.
          check=<option>
                      Generate code to check for run-time checks.
                      nullptr Runtime checking of addresses
                              contained in pointer variables used to
                              reference storage.
                      bounds  Runtime checking of addresses when
                              subscripting within an object of known size.
                      divzero Runtime checking of integer division.
                              A trap will occur if an attempt is made to
                              divide by zero.
                      all     Switches on all the above suboptions.
          dataimported=<name1>:<name2>: ...
                      Specify which data items are imported.  If no names are
                      specified, all data items are assumed to be imported.
                      This is the default.
          datalocal=<name1>:<name2>: ...
                      Specify which data items are local.  If no names are
                      specified, all data items are assumed to be local.
          enum=<enumopt>
                      Specify whether minimum-sized enumerated types will be
                      produced or not. <enumopt> can be either small, int,
                      1, 2, 4, or 8.
                      small denotes that either one, two, four or eight (valid
                      in 64-bit mode only) bytes of storage will be allocated
                      for enum variables based on the range of the enum
                      constants.
                      int is the default, and causes enum variables to be
                      treated as though they were of type signed int
                      depending on the range of the enum constants.
                      1 will cause enum variables to be packed into 1 byte.
                      2 will cause enum variables to be packed into 2 bytes.
                      4 will cause enum variables to be packed into 4 bytes.
                      8 will cause enum variables to be packed into 8 bytes.
                        (enum=8 is valid in 64-bit mode only)
          flag=<sev1>:<sev2>
                      Specify severity level of diagnostics to be reported
                      in source listing (<sev1>), and stderr (<sev2>);
                      the severity levels are one of <i,w,e,s,u>.
          float=<opt1>:<opt2>:...:<optN>
                      The available options are:
                      emulate Function calls are emitted in place of
                              PowerPC floating-point instructions.
                              Use this option only in a single-threaded
                              stand-alone environment, targeting the
                              PowerPC 403 processor.
                              Do not use this suboption with any of the
                              following:
                              o  -qarch=pwr, -qarch=pwr2, -qarch=pwrx
                              o  -qlongdouble, -qldbl128
                              o  cc128, xlc128 invocation commands
                      fltint  Specify whether range checking of floating
                              point to integer conversions is done.
                              Default at -O2: -qfloat=nofltint.
                              Default at -O3: -qfloat=fltint.
                      hsflt   Never round single-precision expressions,
                              and don't perform range checking for
                              floating-point to integer conversions.
                      hssngl  Round single-precision expressions only
                              when the results are stored into float memory
                              locations.
                      nans    Detect conversion of single-precision NaNS to
                              double precision call checking.
                      nomaf   Suppress generation of multiply-add
                              instructions.
                      nofold  Suppress compile-time evaluation of constant
                              floating-point expressions.
                      rndsngl Ensure strict adherence to IEEE standard.
                              all operations on single-precision values
                              produce results that remain in single
                              precision.
                      rrm     Specify run-time rounding mode. Compile with
                              this option if the run-time rounding mode
                              is round toward minus infinity, round toward
                              positive infinity, or not known.
                      rsqrt   Specify whether a division by the result of a
                              square root can be replaced with a multiply
                              by the reciprocal of the square root.
                              Default at -O2: -qfloat=norsqrt.
                              Default at -O3: -qfloat=rsqrt.
                      spnans  Generate extra instructions to detect signalling
                              NaN on conversion from single precision to
                              double precision.  Obsolete; use the equivalent
                              -qfloat=nans option.
          flttrap=<opt1>:<opt2>:...:<optN>
                      Generate instructions to detect and trap floating-point.
                      The available options are:  overflow, underflow,
                      zerodivide, invalid, inexact, enable, imprecise.
          halt=<sev>  Stop compiler after first phase if severity of errors
                      detected equals or exceeds <sev>; the severity
                      level is one of i, w, e, s, u.
          genpcomp[=dirname]
                      Generate precompiled include files.  See online
                      documentation for details.
          genproto=<parmnames>
                      Produces ANSI prototypes from K&R function definitions.
          ignprag=<option>
                      The available options are:
                      disjoint
                              Ignore pragma disjoint.
                      isolated
                              Ignore pragma isolated_call.
                      omp     Ignore OpenMP parallel processing pragmas.
                      ibm     Ignore IBM parallel processing pragmas.
                      all     Ignore all the above pragmas.
          info
          info=all
                      Produce additional lint-like messages.  It turns on all
                      diagnostic messages for all groups.
          info=<group>
                      Produce additional lint-like messages based on <group>.
                      cmp     Possible redundancies in unsigned comparisons
                      cnd     Possible redundancies or problems in conditional
                              expressions
                      cns     Operations involving constants.
                      cnv     Conversions
                      dcl     Consistency of declarations
                      eff     Statements with no effect
                      enu     Consistency of enum variables
                      ext     Unused external definitions
                      gen     General diagnostic messages
                      gnr     Generation of temporary variables
                      got     Use of goto statements
                      ini     Possible problems with initialization
                      inl     Functions not inlined
                      lan     Language level effects
                      obs     Obsolete features
                      ord     Unspecified order of evaluation
                      par     Unused parameters
                      por     Nonportable language constructs
                      ppc     Possible problems with using the preprocessor
                      ppt     Trace of preprocessor actions
                      pro     Missing function prototypes
                      rea     Code that cannot be reached
                      ret     Consistency of return statements
                      trd     Possible truncation or loss of data or precision
                      tru     Variable names truncated by the compiler
                      uni     Unitialized variables
                      use     Unused auto and static variables
                      private Lists shared variables made private to a parallel
                              loop.
                      reduction
                              Lists all variables that are recognized as
                              reduction variables inside a parallel loop.
          initauto=<hh>
                      Initialialize automatic storage to <hh>. <hh> is a
                      hexadecimal value.  This generates extra code and
                      should only be used for error determination.
          inline[=<x>]
                      This is functionally equivalent to the -Q option.
          ipa[=<ipa_options>]
                      Turn on inter-procedural analysis.  See online
                      documentation for details.
          isolated_call=<name1>:<name2>: ...
                      Specify that the calls to the functions listed have no
                      side effects. <name1> and <name2> are function names.
                      The user may specify as many function names as
                      necessary.
          langlvl=<langlvl>:<feature>:...
                      Specify language level and/or features to be enabled
                      during compilation.
                      <langlvl>
                              can be ansi, saal2, saa, extended, or classic.
                      <feature>
                              can be:
                              [no]ucs   enables or disables support for
                                        universal character names.
          maxerr=<num>[:<sev>]
                      Instructs the compiler to halt compilation when <num>
                      errors of <sev> or greater severity is reached.  The
                      default for <sev> is current value of the -qhalt option.
          maxmem=<num>
                      Limit the amount of memory used by space intensive
                      optimizations to <num>.  <num> specified in kilobytes.
          optimize=<level>
                      Enables different levels of optimization.
                      2       Same as -O and -qoptimize.
                      3       Same as -O3. Aggresive optimization.
                      4       Same as -O4. Internally generates -O3 -qipa
                              with automatic architecture and tuning option
                              generation.
                      5       Same as -O5. Internally generates -O3
                              -qipa=level=2 with automatic architecture and
                              tuning option generation.
          proclocal=<name1>:<name2>: ...
                      Specify which functions are local.
                      If no filenames are specified, all invoked functions
                      are assumed to be defined within the current file.
                      The last explicit specification for a function takes
                      precedence.
          procimported=<name1>:<name2>: ...
                      Specify which functions are imported.  If no filenames
                      are specified, all invoked functions are assumed to be
                      defined outside the current file.  The last explicit
                      specification for a function takes precedence.
          procunknown=<name1>:<name2>: ...
                      Specify which functions are unknown to be local or
                      imported.  If no filenames are specified, all functions
                      called are assumed to be unknown. This is the default
                      when no user options are specified. The last explicit
                      specification for a function takes precedence.
          profile=<option>
                      Sets up the object files produced by the compiler for
                      profiling.
                      The available options are:
                      ibm     Generate profiling support code for use with the
                              IBM's Performance Analysis tool.
                      p       Generate profiling support code.  Same as -p.
                      pg      Generate profiling support code including BSD
                              profiling support.  Same as -pq.
          smp[=suboption[:suboption] [ ... ]]
                      [no]auto
                              Enables or disables automatic parallelization.
                      [no]explicit
                              Enables or disables explicit parallelization.
                      schedule=<sched_type>[=n]
                              Specifies what kind of scheduling algorithms
                              and chunking are used for loops to which no
                              other scheduling algorithm has been explicitly
                              assigned in the source code.
                              Valid options for <sched_type> are:
                                         * dynamic[=n]
                                         * guided[=n]
                                         * static[=n]
                                         * affinity[=n]
                                         * runtime
                              For more information, see online documentation.
                      [no]nested_par
                              Enables or disables parallelization of nested
                              parallel constructs.
                      [no]rec_locks
                              Specifies whether recursive or regular locks
                              should be used to implement critical sections.
                      [no]omp Enables or disables strict OpenMP mode.
          spill=<size>
                      Specify the size of the register allocation spill area.
          suppress=<msg_num>:<msg_num>...
                      Suppress compiler messages.
          nosuppress  Don't suppress compiler messages.
          symtab=<options>
                      Controls symbol table.
                      The available options are:
                      unref   Specifies that all typedef declarations, struct,
                              union, and enum type definitions are included
                              for processing by the debugger.  Same as
                              -qdbxextra.
                      static  Adds user-defined, nonexternal names that have a
                              persistent storage class, such as initialized
                              and uninitialized static variables, to the name
                              list (the symbol table of xcoff objects).  Same
                              as -qstatsym.
          tabsize=<size>
                      Changes the length of tabs in your source file.
          tbtable=<option>
                      Generate a traceback table for each function and
                      place it in the text segment at the end of the
                      function code.
                      The available options are:
                      none    No traceback table is generated.
                      full    A full traceback table is generated.
                              This is the default with -g specified.
                      small   A traceback table is generated with no name or
                              parameter information.
                              This is the default when -g is NOT specified.
          tune=<option>
                      Specifies the architecture system for which the
                      executable program is optimized.
                      The available options are:
                      403     Produce an object optimized for all the
                              PowerPC 403 processors.
                              Use -qfloat=emulate to emulate the floating-point
                              instructions omitted by the 403 processor.
                      601     Produce an object optimized for all the
                              PowerPC 601 processors.
                      602     Produce an object optimized for all the
                              PowerPC 602 processors.
                      603     Produce an object optimized for all the
                              PowerPC 603 processors.
                      604     Produce an object optimized for all the
                              PowerPC 604 processors.
                      p2sc    Produce an object optimized for all the
                              p2sc processors.
                      pwr     Produce an object optimized for the POWER
                              hardware platform.
                      pwr2    Produce an object optimized for the
                              POWER2 hardware platform.
                      pwr2s   Produce an object optimized for the
                              POWER2 hardware platform, avoiding certain
                              quadruple-precision instructions that would
                              slow program performance.
                      pwrx    Same as pwr2.
                      rs64a   Produce an object optimized for the rs64a
                              processor.
                      rs64b   Produce an object optimized for the rs64b
                              processor.
                      rs64c   Produce an object optimized for the rs64c
                              processor.
                      pwr3    Produce an object optimized for the POWER3
                              processor.
          unroll[=n]  Allow the optimizer to unroll loops.
          usepcomp[=dirname]
                      Use precompiled include files.  See online documentation
                      for details.
          xref=full   Produce a cross-reference listing containing all names,
                      whether referenced or not; output goes to .lst file.

  Environment Variables
     1.OBJECT_MODE changes the compilation-mode behavior, unless overridden by
                   configuration file or command-line options

        Setting

         not set   32-bit compiler mode.
          32       32-bit compiler mode.
          64       64-bit compiler mode.
         32_64     Fatal error and stop, unless an explicit configuration
                   file or command-line compiler-mode setting exists.
        any other  Fatal error and stop, unless an explicit configuration
                   file or command-line compiler-mode setting exists.


  For a detailed description of each option, please refer to the online
  documentation.

configure:2014: $? = 249
configure:2016: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -v </dev/null >&5
exec: export(export,XL_CONFIG=/etc/vac.cfg:xlc,NULL) 
exec: /usr/bin/pg(/usr/bin/pg,/usr/vac/exe/default_msg/vac.help,NULL) 
  C for AIX Compiler, Version 5

  Usage:
     xlc [ option | inputfile ]...
     cc [ option | inputfile ]...
     c89 [ option | inputfile ]...
     xlc128 [ option | inputfile ]...
     cc128 [ option | inputfile ]...
     xlc_r [ option | inputfile ]...
     cc_r [ option | inputfile ]...
     xlc_r4 [ option | inputfile ]...
     cc_r4 [ option | inputfile ]...
     xlc_r7 [ option | inputfile ]...
     cc_r7 [ option | inputfile ]...

  Description:
     The xlc and related commands compile C source files.
     They also processes assembler source files and object files. Unless the
     -c option is specified, xlc calls the linkage editor to produce a
     single object file. Input files may be any of the following:
       1. file name with .c suffix: C source file
       2. file name with .i suffix: preprocessed C source file
       3. file name with .so suffix: shared object file
       4. file name with .o suffix: object file for ld command
       5. file name with .s suffix: assembler source file

  Options:
     Options can be flag options or keyword options:

       1. Flag options:

        -#        Display language processing commands but do
                  not invoke them; output goes to stdout.
        -bdynamic, -bstatic
                  Determines which types of library files are searched by
                  the linkage editor.
        -brtl     Tells the linkage editor to accept both .so and .a
                  library file types.
        -B<prefix>
                  Construct alternate compiler/assembler/linkage editor
                  program names. <prefix> is added to the beginning of
                  the standard program names.
        -c        Do not send object files to the linkage editor.
        -C        Write comments to output when doing preprocessing,
                  used with -E and -P.
        -D<name>[=<def>]
                  Define <name> as in #define directive. If <def> is
                  not specified, 1 is assumed.
        -E        Preprocess but do not compile; output goes to stdout
        -f<filename>
                  Passes to the linkage editor the filename of a file
                  containing a list of input files to be processed.
        -F<x>[:<stanza>]
                  Use alternate configuration file <x> with optional
                  <stanza>. If <stanza> is not specified, the assumed stanza 
                  is the name of the command used to invoke the compiler. 
        -g        Produce information for the debugger.
        -G        Tells the linkage editor to create a dynamic library.
        -I<dir>   Search in directory <dir> for include files that
                  do not start with an absolute path.
        -l<key>   Search the specified library file,
                  where <key> selects the file lib<key>.a.
        -L<dir>   Search in directory <dir> for files specified by -l<key>.
        -ma       Generate inline calls to the "alloca" function as if
                  "#pragma alloca" directives were in the source file.
        -M        Generate information to be included in a "make"
                  description file; output goes to .u file.
        -o<name>  Name the executable file <name> instead of a.out.
                  When used with the -c option and one source file,
                  name the object file <name> instead of filename.o.
                  If <name> is the name of a directory, files generated by
                  the compiler will be placed into that directory.
        -O        Optimize generated code.
        -O2       Same as -O.
        -O3       Perform some memory and compile time intensive
                  optimizations in addition to those executed with -O2.
                  The -O3 specific optimizations have the potential to
                  alter the semantics of a user's program.
                  The compiler guards against these optimizations at -O2
                  and the option -qstrict is provided at -O3 to turn off
                  these aggressive optimizations.
        -O4       Equivalent to -O3 -qipa with automatic generation of
                  architecture and tuning option ideal for that platform.
        -O5       Equivalent to -O3 -qipa=level=2 with automatic generation of
                  architecture and tuning option ideal for that platform.
        -p        Generate profiling support code.  Same as -qprofile=p.
        -pg       Generate profiling support code including BSD
                  profiling support.  Same as -qprofile=pg.
        -P        Preprocess but do not compile; output goes to .i file.
        -Q<x>, -qinline<x>
                  Inline all appropriate functions where x can be
                  one of the following:
                    !       Not inline any function (equivalent to -qnoinline)
                    =<lc>   Inline if number of source statement in
                            function is less than the number specified
                            in <lc>.
                    -<nm>   Not inline function listed by names in <nm>
                    +<nm>   Attempt to inline function listed by names
                            in <nm>.
        -r        Produce the output file without linking any library.
        -S        Produce a .s file for any source file processed by the
                  compiler.
        -t<x>     Apply prefix from the -B option to the specified program <x>,
                  where x can be one or more of the following:
                    p = preprocessor
                    c = compiler frontend
                    b = compiler backend
                    i = compiler inliner
                    a = assembler
                    l = linkage editor
                    I = inter-procedural analysis - compile phase
                    L = inter-procedural analysis - link phase.
        -U<name>  Undefine name as in #undef directive.
        -v        Displays language processing commands as they
                  are invoked by xlc; output goes to stdout.
        -w        Suppress informational, language-level, and
                  warning messages.
        -W<x,y>   Give the options <y> to the compiler program <x>
                  where x can be one or more of the following:
                    <p,c,b,i,a,l,I,L,m>
        -y<x>     Specify compile-time rounding of constant floating-point
                  expressions, where <x> can be one of the following:
                    n = round to nearest
                    m = round toward minus infinity
                    p = round toward positive infinity
                    z = round toward zero.

       2. Keyword options:

          Keyword options are specified in one of the following ways:

          -q<option>
          -q<option>=<parameter>
          -q<option>=<parameter>:<parameter>

          where <option> is an option name and <parameter> is a
          parameter value.
          Keyword options with no parameters represent switches
          that may be either on or off. The keyword by itself turns
          the switch on, and the keyword preceded by the letters NO
          turns the switch off. For example, -qLIST tells the
          compiler to produce a listing and -qNOLIST tells the
          compiler not to produce a listing. If an option that
          represents a switch is set more than once, the compiler
          uses the last setting.

          Keyword option and parameter names may appear in either
          UPPER CASE or lower case letters in the xlc command.


          Options without parameters:

          32          Selects 32-bit compiler mode.
          64          Selects 64-bit compiler mode.
          ansialias   Use type-based aliasing during optimization.
          attr        Produce an attribute listing containing only
                      referenced names; output goes to .lst file.
          compact     Reduce code size where possible, at the expense
                      of execution speed.  Code size is reduced by
                      inhibiting optimizations that replicate or expand
                      code inline.
          cpluscmt    Permit "//" to introduce a comment that lasts
                      until the end of the current source line, as in C++.
          dbcs        String literals and comments can contain DBCS
                      characters (same as mbcs option).
          dbxextra    Generate symbol table information for unreferenced
                      variables. By default such information is not generated
                      thus reducing the size of the executable compiled with
                      the "-g" option.  Same as -qsymtab=unref.
          digraph     Allow special digraph
          dollar      Allow '$' as an identifier character
          dpcl        Generates symbols for tools based on the Dynamic
                      Probe Class Library (DPCL)
          extchk      Perform external name type-checking and function
                      call checking.
          fdpr        Collect information about programs for use with
                      the AIX fdpr (Feedback Directed Program Restructuring)
                      performance-tuning utility.
          funcsect    Place instructions for each function in a separate csect.
          flttrap     Generate instructions to trap floating-point
                      exceptions.
          fold        Specifies that constant floating-point expressions
                      are to be evaluated at compile time.
          fullpath    Specifies the path information stored for files when
                      you use "-g" and the symbolic debugger.
          heapdebug   Enables debug versions of memory management functions.
          idirfirst   Specify the search order for files included with
                      the #include "file_name" directive.  Use -qidirfirst
                      with the -Idirectory option.  If -qidirfirst option
                      is specified, the directories specified by the
                      -Idirectory option are searched before the directory
                      where the current file resides.
          ignerrno    Tell the optimizer that the program will never
                      refer to or set errno.  This allows additional
                      optimizations.
          inlglue     Generate fast external linkage by inlining the
                      code (pointer glue code) necessary at calls
                      via a function pointer and calls to external
                      procedures.
          ldbl128     Increase long double size from 64 to 128 bits.
          libansi     Assumes that all functions with the name of an
                      ANSI C library functions are in fact the system functions.
          linedebug   Generates abbreviated line number and source file name
                      information for the debugger.
          list        Produce an object listing; output goes to .lst file.
          listopt     Display the settings of all options; output goes
                      to .lst file.
          longdouble  Increase long double size from 64 to 128 bits.
          longlit     Changes implicit type selection for integer constants in
                      64-bit mode.
          longlong    Allow long long integers.
          macpstr     Allow '\p' as the first character of a string constant
                      which will be replaced by the length in bytes.
          makedep     Creates an output file that contains targets suitable for
                      inclusion in a description file for the AIX make command.
          mbcs        String literals and comments can contain DBCS
                      characters (same as dbcs option).
          mkshrobj    Create a shared object from generated object files.
          noprint     Direct listing to /dev/null.
          nostdinc    Specify which files are included with the #include
                      "file_name" and #include <file_name> directives.
                      If -qnostdinc is specified, the /usr/include directory
                      is not searched.
          once        Only process each include file one time.
                      The default is -qnoonce.
          optimize    Same as O and O2. Perform optimization that is the
                      mix between speed and size.  (If -qnooptimize is
                      specified, it is equivalent to -qoptimize=0.)
          pascal      Accept and ignore the keyword 'pascal' as a
                      type modifier.
          pdf1, pdf2  Perform aggressive optimizations with profile
                      directed feedback.
          phsinfo     Produce compiler phase information; output goes to
                      stdout.
          proto       Assert that procedure call points agree
                      with their declarations even if the procedure has
                      not been prototyped. This allows the caller to
                      pass floating point arguments in floating point
                      registers instead of general purpose registers.
          ro          Put string literals in read only area.
          roconst     Put constant values in read only area.
          showinc     Include the source of all included files in the
                      source listing, if the SOURCE option is in effect.
          source      Produce a source listing; output goes to .lst file.
          srcmsg      Reconstruct source lines in error along with the
                      diagnostic messages in the stderr file.
          statsym     Adds user-defined, nonexternal names that have a
                      persistent storage class, such as initialized and
                      uninitialized static variables, to the name list
                      (the symbol table of xcoff objects).  Same as
                      -qsymtab=static.
          strict      Turns off aggresive optimizations which have the
                      potential to alter the semantics of a user's program.
                      This option also sets -qfloat=nofltint:norsqrt.
          strict_induction
                      Turns off induction variable optimizations
                      that have the potential to alter the semantics of a
                      user's program. The default is "nostrict_induction" at
                      -O2 or higher and "strict_induction" otherwise.
                      "nostrict_induction" is recomended if your program does
                      not have overflows or wrap arounds of loop induction
                      variables.
          syntaxonly  Causes the compiler to perform syntax checking without
                      generating an object file.
          threaded    Indicates to the compiler that the program will execute
                      in multi-threaded environment.
          upconv      Preserves the unsigned specification when performing
                      integral promotions.
          warn64      Enables checking for possible long-to-integer or
                      pointer-to-integer truncation.
          xcall       Generate code to static routines within a compilation
                      unit as if they were external routines.
          xref        Produce a cross-reference listing containing
                      only referenced names.


          Options with parameters:
          aggrcopy=[no]overlap
                      Asserts whether source and destination of aggregate
                      assignments overlap.
          alias=<option>
                      Specifies the aliasing assertion to be applied to
                      your compilation unit.
                      The available options are:
                      typ     Pointers to different types are never aliased.
                      allp    Pointers are never aliased.
                      addr    Variables are disjoint from pointers
                              unless their address is taken.
                      ansi    Pointers can only point to an object of the
                              same type. Require -O option.
          align=<algnopt>
                      power   The compiler uses the RISC System/6000
                              alignment rules.
                      full    The compiler uses the RISC System/6000
                              alignment rules. This is the same as power.
                      mac68k  The compiler uses the Macintosh**
                              alignment rules.
                      twobyte The compiler uses the Macintosh alignment rules.
                              The mac68k option is the same as twobyte.
                      packed  The compiler uses the packed alignment rules.
                      natural The compiler maps structure members to
                              their natural boundaries.
                      bit_packed
                              The same as packed. In addition, bit-fields are
                              packed as tight as possible.
          arch=<option>
                      Specifies the architecture on which the executable
                      program will be run.
                      The available options are:
                      com     Produce an object that contains instructions
                              that will run on all the POWER and PowerPC
                              hardware platforms.
                      pwr     Produce an object that contains instructions
                              that will run on the POWER hardware
                              platform.
                      pwr2    Produce an object that contains instructions
                              that will run on the POWER2 hardware
                              platform.
                      pwrx    Same as pwr2.
                      ppc     Produce an object that contains instructions
                              that will run on any of the 32-bit PowerPC
                              hardware platforms.
                      ppcgr   Produce an object that contains optional
                              graphics instructions for PowerPC processors.
                      pwr2s   Produce an object that contains instructions
                              that will run on a pwr2s chip.
                      p2sc    Produce an object that contains instructions
                              that will run on a p2sc chip.
                      601     Produce an object that contains instructions
                              that will run on a 601 chip.
                      602     Produce an object that contains instructions
                              that will run on a 602 chip.
                      603     Produce an object that contains instructions
                              that will run on a 603 chip.
                      604     Produce an object that contains instructions
                              that will run on a 604 chip.
                      403     Produce an object that contains instructions
                              that will run on a 403 chip.
                      rs64a   Produce an object that contains instructions
                              that will run on a rs64a chip.
                      rs64b   Produce an object that contains instructions
                              that will run on a rs64b chip.
                      rs64c   Produce an object that contains instructions
                              that will run on a rs64c chip.
                      pwr3    Produce an object that contains instructions
                              that will run on a POWER3 chip.
                      The default is -qarch=com.  If the -qarch option is
                      specified without the -qtune=<option>, the compiler
                      uses the default -qtune value for the specified 
                      architecture. Refer to online documentation to find
                      actual default setting of -qtune  for a given -qarch.
          assert=<option>
                      Specifies the aliasing assertion to be applied to
                      your compilation unit.
                      The available options are:
                      typ     Pointers to different types are never aliased.
                      allp    Pointers are never aliased.
                      addr    Variables are disjoint from pointers
                              unless their address is taken.
          attr=full   Produce an attribute listing containing all names,
                      whether referenced or not; output goes to .lst file.
          bitfields=signed
          bitfields=unsigned
                      Specify whether bitfields will be signed or unsigned.
          cache=<suboption>:<suboption>...
                      Describe the cache configuration for a specific target
                      execution machine. See online documentation for details.
          chars=signed
          chars=unsigned
                      Specify whether the data type char will be signed
                      or unsigned.
          check=<option>
                      Generate code to check for run-time checks.
                      nullptr Runtime checking of addresses
                              contained in pointer variables used to
                              reference storage.
                      bounds  Runtime checking of addresses when
                              subscripting within an object of known size.
                      divzero Runtime checking of integer division.
                              A trap will occur if an attempt is made to
                              divide by zero.
                      all     Switches on all the above suboptions.
          dataimported=<name1>:<name2>: ...
                      Specify which data items are imported.  If no names are
                      specified, all data items are assumed to be imported.
                      This is the default.
          datalocal=<name1>:<name2>: ...
                      Specify which data items are local.  If no names are
                      specified, all data items are assumed to be local.
          enum=<enumopt>
                      Specify whether minimum-sized enumerated types will be
                      produced or not. <enumopt> can be either small, int,
                      1, 2, 4, or 8.
                      small denotes that either one, two, four or eight (valid
                      in 64-bit mode only) bytes of storage will be allocated
                      for enum variables based on the range of the enum
                      constants.
                      int is the default, and causes enum variables to be
                      treated as though they were of type signed int
                      depending on the range of the enum constants.
                      1 will cause enum variables to be packed into 1 byte.
                      2 will cause enum variables to be packed into 2 bytes.
                      4 will cause enum variables to be packed into 4 bytes.
                      8 will cause enum variables to be packed into 8 bytes.
                        (enum=8 is valid in 64-bit mode only)
          flag=<sev1>:<sev2>
                      Specify severity level of diagnostics to be reported
                      in source listing (<sev1>), and stderr (<sev2>);
                      the severity levels are one of <i,w,e,s,u>.
          float=<opt1>:<opt2>:...:<optN>
                      The available options are:
                      emulate Function calls are emitted in place of
                              PowerPC floating-point instructions.
                              Use this option only in a single-threaded
                              stand-alone environment, targeting the
                              PowerPC 403 processor.
                              Do not use this suboption with any of the
                              following:
                              o  -qarch=pwr, -qarch=pwr2, -qarch=pwrx
                              o  -qlongdouble, -qldbl128
                              o  cc128, xlc128 invocation commands
                      fltint  Specify whether range checking of floating
                              point to integer conversions is done.
                              Default at -O2: -qfloat=nofltint.
                              Default at -O3: -qfloat=fltint.
                      hsflt   Never round single-precision expressions,
                              and don't perform range checking for
                              floating-point to integer conversions.
                      hssngl  Round single-precision expressions only
                              when the results are stored into float memory
                              locations.
                      nans    Detect conversion of single-precision NaNS to
                              double precision call checking.
                      nomaf   Suppress generation of multiply-add
                              instructions.
                      nofold  Suppress compile-time evaluation of constant
                              floating-point expressions.
                      rndsngl Ensure strict adherence to IEEE standard.
                              all operations on single-precision values
                              produce results that remain in single
                              precision.
                      rrm     Specify run-time rounding mode. Compile with
                              this option if the run-time rounding mode
                              is round toward minus infinity, round toward
                              positive infinity, or not known.
                      rsqrt   Specify whether a division by the result of a
                              square root can be replaced with a multiply
                              by the reciprocal of the square root.
                              Default at -O2: -qfloat=norsqrt.
                              Default at -O3: -qfloat=rsqrt.
                      spnans  Generate extra instructions to detect signalling
                              NaN on conversion from single precision to
                              double precision.  Obsolete; use the equivalent
                              -qfloat=nans option.
          flttrap=<opt1>:<opt2>:...:<optN>
                      Generate instructions to detect and trap floating-point.
                      The available options are:  overflow, underflow,
                      zerodivide, invalid, inexact, enable, imprecise.
          halt=<sev>  Stop compiler after first phase if severity of errors
                      detected equals or exceeds <sev>; the severity
                      level is one of i, w, e, s, u.
          genpcomp[=dirname]
                      Generate precompiled include files.  See online
                      documentation for details.
          genproto=<parmnames>
                      Produces ANSI prototypes from K&R function definitions.
          ignprag=<option>
                      The available options are:
                      disjoint
                              Ignore pragma disjoint.
                      isolated
                              Ignore pragma isolated_call.
                      omp     Ignore OpenMP parallel processing pragmas.
                      ibm     Ignore IBM parallel processing pragmas.
                      all     Ignore all the above pragmas.
          info
          info=all
                      Produce additional lint-like messages.  It turns on all
                      diagnostic messages for all groups.
          info=<group>
                      Produce additional lint-like messages based on <group>.
                      cmp     Possible redundancies in unsigned comparisons
                      cnd     Possible redundancies or problems in conditional
                              expressions
                      cns     Operations involving constants.
                      cnv     Conversions
                      dcl     Consistency of declarations
                      eff     Statements with no effect
                      enu     Consistency of enum variables
                      ext     Unused external definitions
                      gen     General diagnostic messages
                      gnr     Generation of temporary variables
                      got     Use of goto statements
                      ini     Possible problems with initialization
                      inl     Functions not inlined
                      lan     Language level effects
                      obs     Obsolete features
                      ord     Unspecified order of evaluation
                      par     Unused parameters
                      por     Nonportable language constructs
                      ppc     Possible problems with using the preprocessor
                      ppt     Trace of preprocessor actions
                      pro     Missing function prototypes
                      rea     Code that cannot be reached
                      ret     Consistency of return statements
                      trd     Possible truncation or loss of data or precision
                      tru     Variable names truncated by the compiler
                      uni     Unitialized variables
                      use     Unused auto and static variables
                      private Lists shared variables made private to a parallel
                              loop.
                      reduction
                              Lists all variables that are recognized as
                              reduction variables inside a parallel loop.
          initauto=<hh>
                      Initialialize automatic storage to <hh>. <hh> is a
                      hexadecimal value.  This generates extra code and
                      should only be used for error determination.
          inline[=<x>]
                      This is functionally equivalent to the -Q option.
          ipa[=<ipa_options>]
                      Turn on inter-procedural analysis.  See online
                      documentation for details.
          isolated_call=<name1>:<name2>: ...
                      Specify that the calls to the functions listed have no
                      side effects. <name1> and <name2> are function names.
                      The user may specify as many function names as
                      necessary.
          langlvl=<langlvl>:<feature>:...
                      Specify language level and/or features to be enabled
                      during compilation.
                      <langlvl>
                              can be ansi, saal2, saa, extended, or classic.
                      <feature>
                              can be:
                              [no]ucs   enables or disables support for
                                        universal character names.
          maxerr=<num>[:<sev>]
                      Instructs the compiler to halt compilation when <num>
                      errors of <sev> or greater severity is reached.  The
                      default for <sev> is current value of the -qhalt option.
          maxmem=<num>
                      Limit the amount of memory used by space intensive
                      optimizations to <num>.  <num> specified in kilobytes.
          optimize=<level>
                      Enables different levels of optimization.
                      2       Same as -O and -qoptimize.
                      3       Same as -O3. Aggresive optimization.
                      4       Same as -O4. Internally generates -O3 -qipa
                              with automatic architecture and tuning option
                              generation.
                      5       Same as -O5. Internally generates -O3
                              -qipa=level=2 with automatic architecture and
                              tuning option generation.
          proclocal=<name1>:<name2>: ...
                      Specify which functions are local.
                      If no filenames are specified, all invoked functions
                      are assumed to be defined within the current file.
                      The last explicit specification for a function takes
                      precedence.
          procimported=<name1>:<name2>: ...
                      Specify which functions are imported.  If no filenames
                      are specified, all invoked functions are assumed to be
                      defined outside the current file.  The last explicit
                      specification for a function takes precedence.
          procunknown=<name1>:<name2>: ...
                      Specify which functions are unknown to be local or
                      imported.  If no filenames are specified, all functions
                      called are assumed to be unknown. This is the default
                      when no user options are specified. The last explicit
                      specification for a function takes precedence.
          profile=<option>
                      Sets up the object files produced by the compiler for
                      profiling.
                      The available options are:
                      ibm     Generate profiling support code for use with the
                              IBM's Performance Analysis tool.
                      p       Generate profiling support code.  Same as -p.
                      pg      Generate profiling support code including BSD
                              profiling support.  Same as -pq.
          smp[=suboption[:suboption] [ ... ]]
                      [no]auto
                              Enables or disables automatic parallelization.
                      [no]explicit
                              Enables or disables explicit parallelization.
                      schedule=<sched_type>[=n]
                              Specifies what kind of scheduling algorithms
                              and chunking are used for loops to which no
                              other scheduling algorithm has been explicitly
                              assigned in the source code.
                              Valid options for <sched_type> are:
                                         * dynamic[=n]
                                         * guided[=n]
                                         * static[=n]
                                         * affinity[=n]
                                         * runtime
                              For more information, see online documentation.
                      [no]nested_par
                              Enables or disables parallelization of nested
                              parallel constructs.
                      [no]rec_locks
                              Specifies whether recursive or regular locks
                              should be used to implement critical sections.
                      [no]omp Enables or disables strict OpenMP mode.
          spill=<size>
                      Specify the size of the register allocation spill area.
          suppress=<msg_num>:<msg_num>...
                      Suppress compiler messages.
          nosuppress  Don't suppress compiler messages.
          symtab=<options>
                      Controls symbol table.
                      The available options are:
                      unref   Specifies that all typedef declarations, struct,
                              union, and enum type definitions are included
                              for processing by the debugger.  Same as
                              -qdbxextra.
                      static  Adds user-defined, nonexternal names that have a
                              persistent storage class, such as initialized
                              and uninitialized static variables, to the name
                              list (the symbol table of xcoff objects).  Same
                              as -qstatsym.
          tabsize=<size>
                      Changes the length of tabs in your source file.
          tbtable=<option>
                      Generate a traceback table for each function and
                      place it in the text segment at the end of the
                      function code.
                      The available options are:
                      none    No traceback table is generated.
                      full    A full traceback table is generated.
                              This is the default with -g specified.
                      small   A traceback table is generated with no name or
                              parameter information.
                              This is the default when -g is NOT specified.
          tune=<option>
                      Specifies the architecture system for which the
                      executable program is optimized.
                      The available options are:
                      403     Produce an object optimized for all the
                              PowerPC 403 processors.
                              Use -qfloat=emulate to emulate the floating-point
                              instructions omitted by the 403 processor.
                      601     Produce an object optimized for all the
                              PowerPC 601 processors.
                      602     Produce an object optimized for all the
                              PowerPC 602 processors.
                      603     Produce an object optimized for all the
                              PowerPC 603 processors.
                      604     Produce an object optimized for all the
                              PowerPC 604 processors.
                      p2sc    Produce an object optimized for all the
                              p2sc processors.
                      pwr     Produce an object optimized for the POWER
                              hardware platform.
                      pwr2    Produce an object optimized for the
                              POWER2 hardware platform.
                      pwr2s   Produce an object optimized for the
                              POWER2 hardware platform, avoiding certain
                              quadruple-precision instructions that would
                              slow program performance.
                      pwrx    Same as pwr2.
                      rs64a   Produce an object optimized for the rs64a
                              processor.
                      rs64b   Produce an object optimized for the rs64b
                              processor.
                      rs64c   Produce an object optimized for the rs64c
                              processor.
                      pwr3    Produce an object optimized for the POWER3
                              processor.
          unroll[=n]  Allow the optimizer to unroll loops.
          usepcomp[=dirname]
                      Use precompiled include files.  See online documentation
                      for details.
          xref=full   Produce a cross-reference listing containing all names,
                      whether referenced or not; output goes to .lst file.

  Environment Variables
     1.OBJECT_MODE changes the compilation-mode behavior, unless overridden by
                   configuration file or command-line options

        Setting

         not set   32-bit compiler mode.
          32       32-bit compiler mode.
          64       64-bit compiler mode.
         32_64     Fatal error and stop, unless an explicit configuration
                   file or command-line compiler-mode setting exists.
        any other  Fatal error and stop, unless an explicit configuration
                   file or command-line compiler-mode setting exists.


  For a detailed description of each option, please refer to the online
  documentation.

unlink: /tmp/xlcW0xqCoqa
unlink: /tmp/xlcW1xqCoqb
unlink: /tmp/xlcW2xqCoqc
configure:2019: $? = 249
configure:2021: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -V </dev/null >&5
export XL_CONFIG=/etc/vac.cfg:xlc 
/usr/bin/pg /usr/vac/exe/default_msg/vac.help 
  C for AIX Compiler, Version 5

  Usage:
     xlc [ option | inputfile ]...
     cc [ option | inputfile ]...
     c89 [ option | inputfile ]...
     xlc128 [ option | inputfile ]...
     cc128 [ option | inputfile ]...
     xlc_r [ option | inputfile ]...
     cc_r [ option | inputfile ]...
     xlc_r4 [ option | inputfile ]...
     cc_r4 [ option | inputfile ]...
     xlc_r7 [ option | inputfile ]...
     cc_r7 [ option | inputfile ]...

  Description:
     The xlc and related commands compile C source files.
     They also processes assembler source files and object files. Unless the
     -c option is specified, xlc calls the linkage editor to produce a
     single object file. Input files may be any of the following:
       1. file name with .c suffix: C source file
       2. file name with .i suffix: preprocessed C source file
       3. file name with .so suffix: shared object file
       4. file name with .o suffix: object file for ld command
       5. file name with .s suffix: assembler source file

  Options:
     Options can be flag options or keyword options:

       1. Flag options:

        -#        Display language processing commands but do
                  not invoke them; output goes to stdout.
        -bdynamic, -bstatic
                  Determines which types of library files are searched by
                  the linkage editor.
        -brtl     Tells the linkage editor to accept both .so and .a
                  library file types.
        -B<prefix>
                  Construct alternate compiler/assembler/linkage editor
                  program names. <prefix> is added to the beginning of
                  the standard program names.
        -c        Do not send object files to the linkage editor.
        -C        Write comments to output when doing preprocessing,
                  used with -E and -P.
        -D<name>[=<def>]
                  Define <name> as in #define directive. If <def> is
                  not specified, 1 is assumed.
        -E        Preprocess but do not compile; output goes to stdout
        -f<filename>
                  Passes to the linkage editor the filename of a file
                  containing a list of input files to be processed.
        -F<x>[:<stanza>]
                  Use alternate configuration file <x> with optional
                  <stanza>. If <stanza> is not specified, the assumed stanza 
                  is the name of the command used to invoke the compiler. 
        -g        Produce information for the debugger.
        -G        Tells the linkage editor to create a dynamic library.
        -I<dir>   Search in directory <dir> for include files that
                  do not start with an absolute path.
        -l<key>   Search the specified library file,
                  where <key> selects the file lib<key>.a.
        -L<dir>   Search in directory <dir> for files specified by -l<key>.
        -ma       Generate inline calls to the "alloca" function as if
                  "#pragma alloca" directives were in the source file.
        -M        Generate information to be included in a "make"
                  description file; output goes to .u file.
        -o<name>  Name the executable file <name> instead of a.out.
                  When used with the -c option and one source file,
                  name the object file <name> instead of filename.o.
                  If <name> is the name of a directory, files generated by
                  the compiler will be placed into that directory.
        -O        Optimize generated code.
        -O2       Same as -O.
        -O3       Perform some memory and compile time intensive
                  optimizations in addition to those executed with -O2.
                  The -O3 specific optimizations have the potential to
                  alter the semantics of a user's program.
                  The compiler guards against these optimizations at -O2
                  and the option -qstrict is provided at -O3 to turn off
                  these aggressive optimizations.
        -O4       Equivalent to -O3 -qipa with automatic generation of
                  architecture and tuning option ideal for that platform.
        -O5       Equivalent to -O3 -qipa=level=2 with automatic generation of
                  architecture and tuning option ideal for that platform.
        -p        Generate profiling support code.  Same as -qprofile=p.
        -pg       Generate profiling support code including BSD
                  profiling support.  Same as -qprofile=pg.
        -P        Preprocess but do not compile; output goes to .i file.
        -Q<x>, -qinline<x>
                  Inline all appropriate functions where x can be
                  one of the following:
                    !       Not inline any function (equivalent to -qnoinline)
                    =<lc>   Inline if number of source statement in
                            function is less than the number specified
                            in <lc>.
                    -<nm>   Not inline function listed by names in <nm>
                    +<nm>   Attempt to inline function listed by names
                            in <nm>.
        -r        Produce the output file without linking any library.
        -S        Produce a .s file for any source file processed by the
                  compiler.
        -t<x>     Apply prefix from the -B option to the specified program <x>,
                  where x can be one or more of the following:
                    p = preprocessor
                    c = compiler frontend
                    b = compiler backend
                    i = compiler inliner
                    a = assembler
                    l = linkage editor
                    I = inter-procedural analysis - compile phase
                    L = inter-procedural analysis - link phase.
        -U<name>  Undefine name as in #undef directive.
        -v        Displays language processing commands as they
                  are invoked by xlc; output goes to stdout.
        -w        Suppress informational, language-level, and
                  warning messages.
        -W<x,y>   Give the options <y> to the compiler program <x>
                  where x can be one or more of the following:
                    <p,c,b,i,a,l,I,L,m>
        -y<x>     Specify compile-time rounding of constant floating-point
                  expressions, where <x> can be one of the following:
                    n = round to nearest
                    m = round toward minus infinity
                    p = round toward positive infinity
                    z = round toward zero.

       2. Keyword options:

          Keyword options are specified in one of the following ways:

          -q<option>
          -q<option>=<parameter>
          -q<option>=<parameter>:<parameter>

          where <option> is an option name and <parameter> is a
          parameter value.
          Keyword options with no parameters represent switches
          that may be either on or off. The keyword by itself turns
          the switch on, and the keyword preceded by the letters NO
          turns the switch off. For example, -qLIST tells the
          compiler to produce a listing and -qNOLIST tells the
          compiler not to produce a listing. If an option that
          represents a switch is set more than once, the compiler
          uses the last setting.

          Keyword option and parameter names may appear in either
          UPPER CASE or lower case letters in the xlc command.


          Options without parameters:

          32          Selects 32-bit compiler mode.
          64          Selects 64-bit compiler mode.
          ansialias   Use type-based aliasing during optimization.
          attr        Produce an attribute listing containing only
                      referenced names; output goes to .lst file.
          compact     Reduce code size where possible, at the expense
                      of execution speed.  Code size is reduced by
                      inhibiting optimizations that replicate or expand
                      code inline.
          cpluscmt    Permit "//" to introduce a comment that lasts
                      until the end of the current source line, as in C++.
          dbcs        String literals and comments can contain DBCS
                      characters (same as mbcs option).
          dbxextra    Generate symbol table information for unreferenced
                      variables. By default such information is not generated
                      thus reducing the size of the executable compiled with
                      the "-g" option.  Same as -qsymtab=unref.
          digraph     Allow special digraph
          dollar      Allow '$' as an identifier character
          dpcl        Generates symbols for tools based on the Dynamic
                      Probe Class Library (DPCL)
          extchk      Perform external name type-checking and function
                      call checking.
          fdpr        Collect information about programs for use with
                      the AIX fdpr (Feedback Directed Program Restructuring)
                      performance-tuning utility.
          funcsect    Place instructions for each function in a separate csect.
          flttrap     Generate instructions to trap floating-point
                      exceptions.
          fold        Specifies that constant floating-point expressions
                      are to be evaluated at compile time.
          fullpath    Specifies the path information stored for files when
                      you use "-g" and the symbolic debugger.
          heapdebug   Enables debug versions of memory management functions.
          idirfirst   Specify the search order for files included with
                      the #include "file_name" directive.  Use -qidirfirst
                      with the -Idirectory option.  If -qidirfirst option
                      is specified, the directories specified by the
                      -Idirectory option are searched before the directory
                      where the current file resides.
          ignerrno    Tell the optimizer that the program will never
                      refer to or set errno.  This allows additional
                      optimizations.
          inlglue     Generate fast external linkage by inlining the
                      code (pointer glue code) necessary at calls
                      via a function pointer and calls to external
                      procedures.
          ldbl128     Increase long double size from 64 to 128 bits.
          libansi     Assumes that all functions with the name of an
                      ANSI C library functions are in fact the system functions.
          linedebug   Generates abbreviated line number and source file name
                      information for the debugger.
          list        Produce an object listing; output goes to .lst file.
          listopt     Display the settings of all options; output goes
                      to .lst file.
          longdouble  Increase long double size from 64 to 128 bits.
          longlit     Changes implicit type selection for integer constants in
                      64-bit mode.
          longlong    Allow long long integers.
          macpstr     Allow '\p' as the first character of a string constant
                      which will be replaced by the length in bytes.
          makedep     Creates an output file that contains targets suitable for
                      inclusion in a description file for the AIX make command.
          mbcs        String literals and comments can contain DBCS
                      characters (same as dbcs option).
          mkshrobj    Create a shared object from generated object files.
          noprint     Direct listing to /dev/null.
          nostdinc    Specify which files are included with the #include
                      "file_name" and #include <file_name> directives.
                      If -qnostdinc is specified, the /usr/include directory
                      is not searched.
          once        Only process each include file one time.
                      The default is -qnoonce.
          optimize    Same as O and O2. Perform optimization that is the
                      mix between speed and size.  (If -qnooptimize is
                      specified, it is equivalent to -qoptimize=0.)
          pascal      Accept and ignore the keyword 'pascal' as a
                      type modifier.
          pdf1, pdf2  Perform aggressive optimizations with profile
                      directed feedback.
          phsinfo     Produce compiler phase information; output goes to
                      stdout.
          proto       Assert that procedure call points agree
                      with their declarations even if the procedure has
                      not been prototyped. This allows the caller to
                      pass floating point arguments in floating point
                      registers instead of general purpose registers.
          ro          Put string literals in read only area.
          roconst     Put constant values in read only area.
          showinc     Include the source of all included files in the
                      source listing, if the SOURCE option is in effect.
          source      Produce a source listing; output goes to .lst file.
          srcmsg      Reconstruct source lines in error along with the
                      diagnostic messages in the stderr file.
          statsym     Adds user-defined, nonexternal names that have a
                      persistent storage class, such as initialized and
                      uninitialized static variables, to the name list
                      (the symbol table of xcoff objects).  Same as
                      -qsymtab=static.
          strict      Turns off aggresive optimizations which have the
                      potential to alter the semantics of a user's program.
                      This option also sets -qfloat=nofltint:norsqrt.
          strict_induction
                      Turns off induction variable optimizations
                      that have the potential to alter the semantics of a
                      user's program. The default is "nostrict_induction" at
                      -O2 or higher and "strict_induction" otherwise.
                      "nostrict_induction" is recomended if your program does
                      not have overflows or wrap arounds of loop induction
                      variables.
          syntaxonly  Causes the compiler to perform syntax checking without
                      generating an object file.
          threaded    Indicates to the compiler that the program will execute
                      in multi-threaded environment.
          upconv      Preserves the unsigned specification when performing
                      integral promotions.
          warn64      Enables checking for possible long-to-integer or
                      pointer-to-integer truncation.
          xcall       Generate code to static routines within a compilation
                      unit as if they were external routines.
          xref        Produce a cross-reference listing containing
                      only referenced names.


          Options with parameters:
          aggrcopy=[no]overlap
                      Asserts whether source and destination of aggregate
                      assignments overlap.
          alias=<option>
                      Specifies the aliasing assertion to be applied to
                      your compilation unit.
                      The available options are:
                      typ     Pointers to different types are never aliased.
                      allp    Pointers are never aliased.
                      addr    Variables are disjoint from pointers
                              unless their address is taken.
                      ansi    Pointers can only point to an object of the
                              same type. Require -O option.
          align=<algnopt>
                      power   The compiler uses the RISC System/6000
                              alignment rules.
                      full    The compiler uses the RISC System/6000
                              alignment rules. This is the same as power.
                      mac68k  The compiler uses the Macintosh**
                              alignment rules.
                      twobyte The compiler uses the Macintosh alignment rules.
                              The mac68k option is the same as twobyte.
                      packed  The compiler uses the packed alignment rules.
                      natural The compiler maps structure members to
                              their natural boundaries.
                      bit_packed
                              The same as packed. In addition, bit-fields are
                              packed as tight as possible.
          arch=<option>
                      Specifies the architecture on which the executable
                      program will be run.
                      The available options are:
                      com     Produce an object that contains instructions
                              that will run on all the POWER and PowerPC
                              hardware platforms.
                      pwr     Produce an object that contains instructions
                              that will run on the POWER hardware
                              platform.
                      pwr2    Produce an object that contains instructions
                              that will run on the POWER2 hardware
                              platform.
                      pwrx    Same as pwr2.
                      ppc     Produce an object that contains instructions
                              that will run on any of the 32-bit PowerPC
                              hardware platforms.
                      ppcgr   Produce an object that contains optional
                              graphics instructions for PowerPC processors.
                      pwr2s   Produce an object that contains instructions
                              that will run on a pwr2s chip.
                      p2sc    Produce an object that contains instructions
                              that will run on a p2sc chip.
                      601     Produce an object that contains instructions
                              that will run on a 601 chip.
                      602     Produce an object that contains instructions
                              that will run on a 602 chip.
                      603     Produce an object that contains instructions
                              that will run on a 603 chip.
                      604     Produce an object that contains instructions
                              that will run on a 604 chip.
                      403     Produce an object that contains instructions
                              that will run on a 403 chip.
                      rs64a   Produce an object that contains instructions
                              that will run on a rs64a chip.
                      rs64b   Produce an object that contains instructions
                              that will run on a rs64b chip.
                      rs64c   Produce an object that contains instructions
                              that will run on a rs64c chip.
                      pwr3    Produce an object that contains instructions
                              that will run on a POWER3 chip.
                      The default is -qarch=com.  If the -qarch option is
                      specified without the -qtune=<option>, the compiler
                      uses the default -qtune value for the specified 
                      architecture. Refer to online documentation to find
                      actual default setting of -qtune  for a given -qarch.
          assert=<option>
                      Specifies the aliasing assertion to be applied to
                      your compilation unit.
                      The available options are:
                      typ     Pointers to different types are never aliased.
                      allp    Pointers are never aliased.
                      addr    Variables are disjoint from pointers
                              unless their address is taken.
          attr=full   Produce an attribute listing containing all names,
                      whether referenced or not; output goes to .lst file.
          bitfields=signed
          bitfields=unsigned
                      Specify whether bitfields will be signed or unsigned.
          cache=<suboption>:<suboption>...
                      Describe the cache configuration for a specific target
                      execution machine. See online documentation for details.
          chars=signed
          chars=unsigned
                      Specify whether the data type char will be signed
                      or unsigned.
          check=<option>
                      Generate code to check for run-time checks.
                      nullptr Runtime checking of addresses
                              contained in pointer variables used to
                              reference storage.
                      bounds  Runtime checking of addresses when
                              subscripting within an object of known size.
                      divzero Runtime checking of integer division.
                              A trap will occur if an attempt is made to
                              divide by zero.
                      all     Switches on all the above suboptions.
          dataimported=<name1>:<name2>: ...
                      Specify which data items are imported.  If no names are
                      specified, all data items are assumed to be imported.
                      This is the default.
          datalocal=<name1>:<name2>: ...
                      Specify which data items are local.  If no names are
                      specified, all data items are assumed to be local.
          enum=<enumopt>
                      Specify whether minimum-sized enumerated types will be
                      produced or not. <enumopt> can be either small, int,
                      1, 2, 4, or 8.
                      small denotes that either one, two, four or eight (valid
                      in 64-bit mode only) bytes of storage will be allocated
                      for enum variables based on the range of the enum
                      constants.
                      int is the default, and causes enum variables to be
                      treated as though they were of type signed int
                      depending on the range of the enum constants.
                      1 will cause enum variables to be packed into 1 byte.
                      2 will cause enum variables to be packed into 2 bytes.
                      4 will cause enum variables to be packed into 4 bytes.
                      8 will cause enum variables to be packed into 8 bytes.
                        (enum=8 is valid in 64-bit mode only)
          flag=<sev1>:<sev2>
                      Specify severity level of diagnostics to be reported
                      in source listing (<sev1>), and stderr (<sev2>);
                      the severity levels are one of <i,w,e,s,u>.
          float=<opt1>:<opt2>:...:<optN>
                      The available options are:
                      emulate Function calls are emitted in place of
                              PowerPC floating-point instructions.
                              Use this option only in a single-threaded
                              stand-alone environment, targeting the
                              PowerPC 403 processor.
                              Do not use this suboption with any of the
                              following:
                              o  -qarch=pwr, -qarch=pwr2, -qarch=pwrx
                              o  -qlongdouble, -qldbl128
                              o  cc128, xlc128 invocation commands
                      fltint  Specify whether range checking of floating
                              point to integer conversions is done.
                              Default at -O2: -qfloat=nofltint.
                              Default at -O3: -qfloat=fltint.
                      hsflt   Never round single-precision expressions,
                              and don't perform range checking for
                              floating-point to integer conversions.
                      hssngl  Round single-precision expressions only
                              when the results are stored into float memory
                              locations.
                      nans    Detect conversion of single-precision NaNS to
                              double precision call checking.
                      nomaf   Suppress generation of multiply-add
                              instructions.
                      nofold  Suppress compile-time evaluation of constant
                              floating-point expressions.
                      rndsngl Ensure strict adherence to IEEE standard.
                              all operations on single-precision values
                              produce results that remain in single
                              precision.
                      rrm     Specify run-time rounding mode. Compile with
                              this option if the run-time rounding mode
                              is round toward minus infinity, round toward
                              positive infinity, or not known.
                      rsqrt   Specify whether a division by the result of a
                              square root can be replaced with a multiply
                              by the reciprocal of the square root.
                              Default at -O2: -qfloat=norsqrt.
                              Default at -O3: -qfloat=rsqrt.
                      spnans  Generate extra instructions to detect signalling
                              NaN on conversion from single precision to
                              double precision.  Obsolete; use the equivalent
                              -qfloat=nans option.
          flttrap=<opt1>:<opt2>:...:<optN>
                      Generate instructions to detect and trap floating-point.
                      The available options are:  overflow, underflow,
                      zerodivide, invalid, inexact, enable, imprecise.
          halt=<sev>  Stop compiler after first phase if severity of errors
                      detected equals or exceeds <sev>; the severity
                      level is one of i, w, e, s, u.
          genpcomp[=dirname]
                      Generate precompiled include files.  See online
                      documentation for details.
          genproto=<parmnames>
                      Produces ANSI prototypes from K&R function definitions.
          ignprag=<option>
                      The available options are:
                      disjoint
                              Ignore pragma disjoint.
                      isolated
                              Ignore pragma isolated_call.
                      omp     Ignore OpenMP parallel processing pragmas.
                      ibm     Ignore IBM parallel processing pragmas.
                      all     Ignore all the above pragmas.
          info
          info=all
                      Produce additional lint-like messages.  It turns on all
                      diagnostic messages for all groups.
          info=<group>
                      Produce additional lint-like messages based on <group>.
                      cmp     Possible redundancies in unsigned comparisons
                      cnd     Possible redundancies or problems in conditional
                              expressions
                      cns     Operations involving constants.
                      cnv     Conversions
                      dcl     Consistency of declarations
                      eff     Statements with no effect
                      enu     Consistency of enum variables
                      ext     Unused external definitions
                      gen     General diagnostic messages
                      gnr     Generation of temporary variables
                      got     Use of goto statements
                      ini     Possible problems with initialization
                      inl     Functions not inlined
                      lan     Language level effects
                      obs     Obsolete features
                      ord     Unspecified order of evaluation
                      par     Unused parameters
                      por     Nonportable language constructs
                      ppc     Possible problems with using the preprocessor
                      ppt     Trace of preprocessor actions
                      pro     Missing function prototypes
                      rea     Code that cannot be reached
                      ret     Consistency of return statements
                      trd     Possible truncation or loss of data or precision
                      tru     Variable names truncated by the compiler
                      uni     Unitialized variables
                      use     Unused auto and static variables
                      private Lists shared variables made private to a parallel
                              loop.
                      reduction
                              Lists all variables that are recognized as
                              reduction variables inside a parallel loop.
          initauto=<hh>
                      Initialialize automatic storage to <hh>. <hh> is a
                      hexadecimal value.  This generates extra code and
                      should only be used for error determination.
          inline[=<x>]
                      This is functionally equivalent to the -Q option.
          ipa[=<ipa_options>]
                      Turn on inter-procedural analysis.  See online
                      documentation for details.
          isolated_call=<name1>:<name2>: ...
                      Specify that the calls to the functions listed have no
                      side effects. <name1> and <name2> are function names.
                      The user may specify as many function names as
                      necessary.
          langlvl=<langlvl>:<feature>:...
                      Specify language level and/or features to be enabled
                      during compilation.
                      <langlvl>
                              can be ansi, saal2, saa, extended, or classic.
                      <feature>
                              can be:
                              [no]ucs   enables or disables support for
                                        universal character names.
          maxerr=<num>[:<sev>]
                      Instructs the compiler to halt compilation when <num>
                      errors of <sev> or greater severity is reached.  The
                      default for <sev> is current value of the -qhalt option.
          maxmem=<num>
                      Limit the amount of memory used by space intensive
                      optimizations to <num>.  <num> specified in kilobytes.
          optimize=<level>
                      Enables different levels of optimization.
                      2       Same as -O and -qoptimize.
                      3       Same as -O3. Aggresive optimization.
                      4       Same as -O4. Internally generates -O3 -qipa
                              with automatic architecture and tuning option
                              generation.
                      5       Same as -O5. Internally generates -O3
                              -qipa=level=2 with automatic architecture and
                              tuning option generation.
          proclocal=<name1>:<name2>: ...
                      Specify which functions are local.
                      If no filenames are specified, all invoked functions
                      are assumed to be defined within the current file.
                      The last explicit specification for a function takes
                      precedence.
          procimported=<name1>:<name2>: ...
                      Specify which functions are imported.  If no filenames
                      are specified, all invoked functions are assumed to be
                      defined outside the current file.  The last explicit
                      specification for a function takes precedence.
          procunknown=<name1>:<name2>: ...
                      Specify which functions are unknown to be local or
                      imported.  If no filenames are specified, all functions
                      called are assumed to be unknown. This is the default
                      when no user options are specified. The last explicit
                      specification for a function takes precedence.
          profile=<option>
                      Sets up the object files produced by the compiler for
                      profiling.
                      The available options are:
                      ibm     Generate profiling support code for use with the
                              IBM's Performance Analysis tool.
                      p       Generate profiling support code.  Same as -p.
                      pg      Generate profiling support code including BSD
                              profiling support.  Same as -pq.
          smp[=suboption[:suboption] [ ... ]]
                      [no]auto
                              Enables or disables automatic parallelization.
                      [no]explicit
                              Enables or disables explicit parallelization.
                      schedule=<sched_type>[=n]
                              Specifies what kind of scheduling algorithms
                              and chunking are used for loops to which no
                              other scheduling algorithm has been explicitly
                              assigned in the source code.
                              Valid options for <sched_type> are:
                                         * dynamic[=n]
                                         * guided[=n]
                                         * static[=n]
                                         * affinity[=n]
                                         * runtime
                              For more information, see online documentation.
                      [no]nested_par
                              Enables or disables parallelization of nested
                              parallel constructs.
                      [no]rec_locks
                              Specifies whether recursive or regular locks
                              should be used to implement critical sections.
                      [no]omp Enables or disables strict OpenMP mode.
          spill=<size>
                      Specify the size of the register allocation spill area.
          suppress=<msg_num>:<msg_num>...
                      Suppress compiler messages.
          nosuppress  Don't suppress compiler messages.
          symtab=<options>
                      Controls symbol table.
                      The available options are:
                      unref   Specifies that all typedef declarations, struct,
                              union, and enum type definitions are included
                              for processing by the debugger.  Same as
                              -qdbxextra.
                      static  Adds user-defined, nonexternal names that have a
                              persistent storage class, such as initialized
                              and uninitialized static variables, to the name
                              list (the symbol table of xcoff objects).  Same
                              as -qstatsym.
          tabsize=<size>
                      Changes the length of tabs in your source file.
          tbtable=<option>
                      Generate a traceback table for each function and
                      place it in the text segment at the end of the
                      function code.
                      The available options are:
                      none    No traceback table is generated.
                      full    A full traceback table is generated.
                              This is the default with -g specified.
                      small   A traceback table is generated with no name or
                              parameter information.
                              This is the default when -g is NOT specified.
          tune=<option>
                      Specifies the architecture system for which the
                      executable program is optimized.
                      The available options are:
                      403     Produce an object optimized for all the
                              PowerPC 403 processors.
                              Use -qfloat=emulate to emulate the floating-point
                              instructions omitted by the 403 processor.
                      601     Produce an object optimized for all the
                              PowerPC 601 processors.
                      602     Produce an object optimized for all the
                              PowerPC 602 processors.
                      603     Produce an object optimized for all the
                              PowerPC 603 processors.
                      604     Produce an object optimized for all the
                              PowerPC 604 processors.
                      p2sc    Produce an object optimized for all the
                              p2sc processors.
                      pwr     Produce an object optimized for the POWER
                              hardware platform.
                      pwr2    Produce an object optimized for the
                              POWER2 hardware platform.
                      pwr2s   Produce an object optimized for the
                              POWER2 hardware platform, avoiding certain
                              quadruple-precision instructions that would
                              slow program performance.
                      pwrx    Same as pwr2.
                      rs64a   Produce an object optimized for the rs64a
                              processor.
                      rs64b   Produce an object optimized for the rs64b
                              processor.
                      rs64c   Produce an object optimized for the rs64c
                              processor.
                      pwr3    Produce an object optimized for the POWER3
                              processor.
          unroll[=n]  Allow the optimizer to unroll loops.
          usepcomp[=dirname]
                      Use precompiled include files.  See online documentation
                      for details.
          xref=full   Produce a cross-reference listing containing all names,
                      whether referenced or not; output goes to .lst file.

  Environment Variables
     1.OBJECT_MODE changes the compilation-mode behavior, unless overridden by
                   configuration file or command-line options

        Setting

         not set   32-bit compiler mode.
          32       32-bit compiler mode.
          64       64-bit compiler mode.
         32_64     Fatal error and stop, unless an explicit configuration
                   file or command-line compiler-mode setting exists.
        any other  Fatal error and stop, unless an explicit configuration
                   file or command-line compiler-mode setting exists.


  For a detailed description of each option, please refer to the online
  documentation.

rm /tmp/xlcW0xt0Nqa
rm /tmp/xlcW1xt0Nqb
rm /tmp/xlcW2xt0Nqc
configure:2024: $? = 249
configure:2048: checking for C compiler default output
configure:2051: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc    conftest.c  >&5
configure:2054: $? = 0
configure:2100: result: a.out
configure:2105: checking whether the C compiler works
configure:2111: ./a.out
configure:2114: $? = 0
configure:2131: result: yes
configure:2138: checking whether we are cross compiling
configure:2140: result: no
configure:2143: checking for suffix of executables
configure:2145: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest    conftest.c  >&5
configure:2148: $? = 0
configure:2173: result: 
configure:2179: checking for suffix of object files
configure:2201: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c   conftest.c >&5
configure:2204: $? = 0
configure:2226: result: o
configure:2230: checking whether we are using the GNU C compiler
configure:2255: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c   conftest.c >&5
"configure", line 2250.14: 1506-275 (S) Unexpected text me encountered.
"configure", line 2250.8: 1506-045 (S) Undeclared identifier choke.
configure:2258: $? = 1
configure: failed program was:
| #line 2235 "configure"
| /* confdefs.h.  */
| 
| #define PACKAGE_NAME "GNU Bison"
| #define PACKAGE_TARNAME "bison"
| #define PACKAGE_VERSION "1.875"
| #define PACKAGE_STRING "GNU Bison 1.875"
| #define PACKAGE_BUGREPORT "bug-bison@gnu.org"
| #define PACKAGE "bison"
| #define VERSION "1.875"
| /* end confdefs.h.  */
| 
| int
| main ()
| {
| #ifndef __GNUC__
|        choke me
| #endif
| 
|   ;
|   return 0;
| }
configure:2277: result: no
configure:2283: checking whether /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc accepts -g
configure:2305: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
configure:2308: $? = 0
configure:2311: test -s conftest.o
configure:2314: $? = 0
configure:2325: result: yes
configure:2342: checking for /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc option to accept ANSI C
configure:2403: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc  -c -g  conftest.c >&5
configure:2406: $? = 0
configure:2409: test -s conftest.o
configure:2412: $? = 0
configure:2430: result: none needed
configure:2448: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
"conftest.c", line 2.3: 1506-166 (S) Definition of function choke requires parentheses.
"conftest.c", line 2.9: 1506-046 (S) Syntax error.
configure:2451: $? = 1
configure: failed program was:
| #ifndef __cplusplus
|   choke me
| #endif
configure:2579: checking for style of include used by make
configure:2607: result: GNU
configure:2635: checking dependency style of /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc
configure:2697: result: aix
configure:2717: checking for strerror in -lcposix
configure:2748: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g   conftest.c -lcposix   >&5
ld: 0706-006 Cannot find or open library file: -l cposix
	ld:open(): No such file or directory
configure:2751: $? = 255
configure: failed program was:
| #line 2724 "configure"
| /* confdefs.h.  */
| 
| #define PACKAGE_NAME "GNU Bison"
| #define PACKAGE_TARNAME "bison"
| #define PACKAGE_VERSION "1.875"
| #define PACKAGE_STRING "GNU Bison 1.875"
| #define PACKAGE_BUGREPORT "bug-bison@gnu.org"
| #define PACKAGE "bison"
| #define VERSION "1.875"
| /* end confdefs.h.  */
| 
| /* Override any gcc2 internal prototype to avoid an error.  */
| #ifdef __cplusplus
| extern "C"
| #endif
| /* We use char because int might match the return type of a gcc2
|    builtin and then its argument prototype would still apply.  */
| char strerror ();
| int
| main ()
| {
| strerror ();
|   ;
|   return 0;
| }
configure:2769: result: no
configure:2788: checking how to run the C preprocessor
configure:2824: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -E  conftest.c
configure:2830: $? = 0
configure:2862: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -E  conftest.c
"configure", line 2864.10: 1506-296 (S) #include file <ac_nonexistent.h> not found.
configure:2868: $? = 1
configure: failed program was:
| #line 2853 "configure"
| /* confdefs.h.  */
| 
| #define PACKAGE_NAME "GNU Bison"
| #define PACKAGE_TARNAME "bison"
| #define PACKAGE_VERSION "1.875"
| #define PACKAGE_STRING "GNU Bison 1.875"
| #define PACKAGE_BUGREPORT "bug-bison@gnu.org"
| #define PACKAGE "bison"
| #define VERSION "1.875"
| #define _GNU_SOURCE 1
| /* end confdefs.h.  */
| #include <ac_nonexistent.h>
configure:2906: result: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -E
configure:2931: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -E  conftest.c
configure:2937: $? = 0
configure:2969: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -E  conftest.c
"configure", line 2971.10: 1506-296 (S) #include file <ac_nonexistent.h> not found.
configure:2975: $? = 1
configure: failed program was:
| #line 2960 "configure"
| /* confdefs.h.  */
| 
| #define PACKAGE_NAME "GNU Bison"
| #define PACKAGE_TARNAME "bison"
| #define PACKAGE_VERSION "1.875"
| #define PACKAGE_STRING "GNU Bison 1.875"
| #define PACKAGE_BUGREPORT "bug-bison@gnu.org"
| #define PACKAGE "bison"
| #define VERSION "1.875"
| #define _GNU_SOURCE 1
| /* end confdefs.h.  */
| #include <ac_nonexistent.h>
configure:3018: checking for egrep
configure:3028: result: grep -E
configure:3033: checking for ANSI C header files
configure:3059: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
configure:3062: $? = 0
configure:3065: test -s conftest.o
configure:3068: $? = 0
configure:3160: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g   conftest.c  >&5
configure:3163: $? = 0
configure:3165: ./conftest
configure:3168: $? = 0
configure:3183: result: yes
configure:3207: checking for sys/types.h
configure:3224: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
configure:3227: $? = 0
configure:3230: test -s conftest.o
configure:3233: $? = 0
configure:3244: result: yes
configure:3207: checking for sys/stat.h
configure:3224: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
configure:3227: $? = 0
configure:3230: test -s conftest.o
configure:3233: $? = 0
configure:3244: result: yes
configure:3207: checking for stdlib.h
configure:3224: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
configure:3227: $? = 0
configure:3230: test -s conftest.o
configure:3233: $? = 0
configure:3244: result: yes
configure:3207: checking for string.h
configure:3224: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
configure:3227: $? = 0
configure:3230: test -s conftest.o
configure:3233: $? = 0
configure:3244: result: yes
configure:3207: checking for memory.h
configure:3224: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
configure:3227: $? = 0
configure:3230: test -s conftest.o
configure:3233: $? = 0
configure:3244: result: yes
configure:3207: checking for strings.h
configure:3224: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
configure:3227: $? = 0
configure:3230: test -s conftest.o
configure:3233: $? = 0
configure:3244: result: yes
configure:3207: checking for inttypes.h
configure:3224: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
configure:3227: $? = 0
configure:3230: test -s conftest.o
configure:3233: $? = 0
configure:3244: result: yes
configure:3207: checking for stdint.h
configure:3224: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
"configure", line 3266.10: 1506-296 (S) #include file <stdint.h> not found.
configure:3227: $? = 1
configure: failed program was:
| #line 3212 "configure"
| /* confdefs.h.  */
| 
| #define PACKAGE_NAME "GNU Bison"
| #define PACKAGE_TARNAME "bison"
| #define PACKAGE_VERSION "1.875"
| #define PACKAGE_STRING "GNU Bison 1.875"
| #define PACKAGE_BUGREPORT "bug-bison@gnu.org"
| #define PACKAGE "bison"
| #define VERSION "1.875"
| #define _GNU_SOURCE 1
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| /* end confdefs.h.  */
| #include <stdio.h>
| #if HAVE_SYS_TYPES_H
| # include <sys/types.h>
| #endif
| #if HAVE_SYS_STAT_H
| # include <sys/stat.h>
| #endif
| #if STDC_HEADERS
| # include <stdlib.h>
| # include <stddef.h>
| #else
| # if HAVE_STDLIB_H
| #  include <stdlib.h>
| # endif
| #endif
| #if HAVE_STRING_H
| # if !STDC_HEADERS && HAVE_MEMORY_H
| #  include <memory.h>
| # endif
| # include <string.h>
| #endif
| #if HAVE_STRINGS_H
| # include <strings.h>
| #endif
| #if HAVE_INTTYPES_H
| # include <inttypes.h>
| #else
| # if HAVE_STDINT_H
| #  include <stdint.h>
| # endif
| #endif
| #if HAVE_UNISTD_H
| # include <unistd.h>
| #endif
| 
| #include <stdint.h>
configure:3244: result: no
configure:3207: checking for unistd.h
configure:3224: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
configure:3227: $? = 0
configure:3230: test -s conftest.o
configure:3233: $? = 0
configure:3244: result: yes
configure:3266: checking minix/config.h usability
configure:3279: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
"configure", line 3322.10: 1506-296 (S) #include file <minix/config.h> not found.
configure:3282: $? = 1
configure: failed program was:
| #line 3268 "configure"
| /* confdefs.h.  */
| 
| #define PACKAGE_NAME "GNU Bison"
| #define PACKAGE_TARNAME "bison"
| #define PACKAGE_VERSION "1.875"
| #define PACKAGE_STRING "GNU Bison 1.875"
| #define PACKAGE_BUGREPORT "bug-bison@gnu.org"
| #define PACKAGE "bison"
| #define VERSION "1.875"
| #define _GNU_SOURCE 1
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_UNISTD_H 1
| /* end confdefs.h.  */
| #include <stdio.h>
| #if HAVE_SYS_TYPES_H
| # include <sys/types.h>
| #endif
| #if HAVE_SYS_STAT_H
| # include <sys/stat.h>
| #endif
| #if STDC_HEADERS
| # include <stdlib.h>
| # include <stddef.h>
| #else
| # if HAVE_STDLIB_H
| #  include <stdlib.h>
| # endif
| #endif
| #if HAVE_STRING_H
| # if !STDC_HEADERS && HAVE_MEMORY_H
| #  include <memory.h>
| # endif
| # include <string.h>
| #endif
| #if HAVE_STRINGS_H
| # include <strings.h>
| #endif
| #if HAVE_INTTYPES_H
| # include <inttypes.h>
| #else
| # if HAVE_STDINT_H
| #  include <stdint.h>
| # endif
| #endif
| #if HAVE_UNISTD_H
| # include <unistd.h>
| #endif
| #include <minix/config.h>
configure:3298: result: no
configure:3302: checking minix/config.h presence
configure:3313: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -E  conftest.c
"configure", line 3324.10: 1506-296 (S) #include file <minix/config.h> not found.
configure:3319: $? = 1
configure: failed program was:
| #line 3304 "configure"
| /* confdefs.h.  */
| 
| #define PACKAGE_NAME "GNU Bison"
| #define PACKAGE_TARNAME "bison"
| #define PACKAGE_VERSION "1.875"
| #define PACKAGE_STRING "GNU Bison 1.875"
| #define PACKAGE_BUGREPORT "bug-bison@gnu.org"
| #define PACKAGE "bison"
| #define VERSION "1.875"
| #define _GNU_SOURCE 1
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_UNISTD_H 1
| /* end confdefs.h.  */
| #include <minix/config.h>
configure:3338: result: no
configure:3374: checking for minix/config.h
configure:3381: result: no
configure:3413: checking for /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc option to accept ANSI C
configure:3477: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc  -c -g  conftest.c >&5
configure:3480: $? = 0
configure:3483: test -s conftest.o
configure:3486: $? = 0
configure:3501: result: none needed
configure:4125: checking for flex
configure:4141: found /afs/eda/prod/tools/9.1/bin/flex
configure:4151: result: flex
configure:4164: checking for yywrap in -lfl
configure:4195: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g   conftest.c -lfl   >&5
ld: 0706-006 Cannot find or open library file: -l fl
	ld:open(): No such file or directory
configure:4198: $? = 255
configure: failed program was:
| #line 4171 "configure"
| /* confdefs.h.  */
| 
| #define PACKAGE_NAME "GNU Bison"
| #define PACKAGE_TARNAME "bison"
| #define PACKAGE_VERSION "1.875"
| #define PACKAGE_STRING "GNU Bison 1.875"
| #define PACKAGE_BUGREPORT "bug-bison@gnu.org"
| #define PACKAGE "bison"
| #define VERSION "1.875"
| #define _GNU_SOURCE 1
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_UNISTD_H 1
| /* end confdefs.h.  */
| 
| /* Override any gcc2 internal prototype to avoid an error.  */
| #ifdef __cplusplus
| extern "C"
| #endif
| /* We use char because int might match the return type of a gcc2
|    builtin and then its argument prototype would still apply.  */
| char yywrap ();
| int
| main ()
| {
| yywrap ();
|   ;
|   return 0;
| }
configure:4216: result: no
configure:4221: checking for yywrap in -ll
configure:4252: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g   conftest.c -ll   >&5
configure:4255: $? = 0
configure:4258: test -s conftest
configure:4261: $? = 0
configure:4273: result: yes
configure:4284: checking lex output file root
configure:4295: flex conftest.l
configure:4298: $? = 0
configure:4310: result: lex.yy
configure:4315: checking whether yytext is a pointer
configure:4331: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g   conftest.c  -ll >&5
configure:4334: $? = 0
configure:4337: test -s conftest
configure:4340: $? = 0
configure:4353: result: yes
configure:4368: checking for bison
configure:4384: found /afs/eda/prod/tools/9.1/bin/bison
configure:4394: result: bison -y
configure:4446: checking for ranlib
configure:4462: found /usr/bin/ranlib
configure:4473: result: ranlib
configure:4489: checking for gm4
configure:4522: result: no
configure:4489: checking for gnum4
configure:4522: result: no
configure:4489: checking for m4
configure:4507: found /afs/eda/tools/gnu/bin/m4
configure:4519: result: /afs/eda/tools/gnu/bin/m4
configure:4530: checking whether m4 supports frozen files
configure:4542: result: yes
configure:4556: checking for ANSI C header files
configure:4706: result: yes
configure:4735: checking ctype.h usability
configure:4748: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
configure:4751: $? = 0
configure:4754: test -s conftest.o
configure:4757: $? = 0
configure:4767: result: yes
configure:4771: checking ctype.h presence
configure:4782: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -E  conftest.c
configure:4788: $? = 0
configure:4807: result: yes
configure:4843: checking for ctype.h
configure:4850: result: yes
configure:4735: checking locale.h usability
configure:4748: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
configure:4751: $? = 0
configure:4754: test -s conftest.o
configure:4757: $? = 0
configure:4767: result: yes
configure:4771: checking locale.h presence
configure:4782: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -E  conftest.c
configure:4788: $? = 0
configure:4807: result: yes
configure:4843: checking for locale.h
configure:4850: result: yes
configure:4726: checking for memory.h
configure:4731: result: yes
configure:4726: checking for stdlib.h
configure:4731: result: yes
configure:4726: checking for string.h
configure:4731: result: yes
configure:4726: checking for unistd.h
configure:4731: result: yes
configure:4863: checking for stdbool.h that conforms to C99
configure:4917: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
"configure", line 4898.20: 1506-296 (S) #include file <stdbool.h> not found.
"configure", line 4900.12: 1506-046 (S) Syntax error.
"configure", line 4918.43: 1506-278 (S) The structure definition must specify a member list.
"configure", line 4920.18: 1506-045 (S) Undeclared identifier true.
"configure", line 4921.18: 1506-045 (S) Undeclared identifier false.
"configure", line 4922.18: 1506-045 (S) Undeclared identifier __bool_true_false_are_defined.
"configure", line 4923.18: 1506-045 (S) Undeclared identifier bool.
"configure", line 4924.11: 1506-166 (S) Definition of function bool requires parentheses.
"configure", line 4924.16: 1506-276 (S) Syntax error: possible missing '{'?
"configure", line 4933.30: 1506-045 (S) Undeclared identifier e.
"configure", line 4933.35: 1506-045 (S) Undeclared identifier f.
"configure", line 4933.40: 1506-045 (S) Undeclared identifier g.
"configure", line 4933.45: 1506-045 (S) Undeclared identifier h.
"configure", line 4933.50: 1506-045 (S) Undeclared identifier i.
configure:4920: $? = 1
configure: failed program was:
| #line 4868 "configure"
| /* confdefs.h.  */
| 
| #define PACKAGE_NAME "GNU Bison"
| #define PACKAGE_TARNAME "bison"
| #define PACKAGE_VERSION "1.875"
| #define PACKAGE_STRING "GNU Bison 1.875"
| #define PACKAGE_BUGREPORT "bug-bison@gnu.org"
| #define PACKAGE "bison"
| #define VERSION "1.875"
| #define _GNU_SOURCE 1
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_UNISTD_H 1
| #define YYTEXT_POINTER 1
| #define M4 "/afs/eda/tools/gnu/bin/m4"
| #define STDC_HEADERS 1
| #define HAVE_CTYPE_H 1
| #define HAVE_LOCALE_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_UNISTD_H 1
| /* end confdefs.h.  */
| 
| 	  #include <stdbool.h>
| 	  #ifndef bool
| 	   "error: bool is not defined"
| 	  #endif
| 	  #ifndef false
| 	   "error: false is not defined"
| 	  #endif
| 	  #if false
| 	   "error: false is not 0"
| 	  #endif
| 	  #ifndef true
| 	   "error: false is not defined"
| 	  #endif
| 	  #if true != 1
| 	   "error: true is not 1"
| 	  #endif
| 	  #ifndef __bool_true_false_are_defined
| 	   "error: __bool_true_false_are_defined is not defined"
| 	  #endif
| 
| 	  struct s { _Bool s: 1; _Bool t; } s;
| 
| 	  char a[true == 1 ? 1 : -1];
| 	  char b[false == 0 ? 1 : -1];
| 	  char c[__bool_true_false_are_defined == 1 ? 1 : -1];
| 	  char d[(bool) -0.5 == true ? 1 : -1];
| 	  bool e = &s;
| 	  char f[(_Bool) -0.0 == false ? 1 : -1];
| 	  char g[true];
| 	  char h[sizeof (_Bool)];
| 	  char i[sizeof s.t];
| 
| int
| main ()
| {
|  return !a + !b + !c + !d + !e + !f + !g + !h + !i;
|   ;
|   return 0;
| }
configure:4937: result: no
configure:4948: checking for inline
configure:4970: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
"configure", line 4986.35: 1506-277 (S) Syntax error: possible missing ';' or ','?
"configure", line 4986.8: 1506-485 (S) Parameter declaration list is incompatible with declarator for inline.
configure:4973: $? = 1
configure: failed program was:
| #line 4955 "configure"
| /* confdefs.h.  */
| 
| #define PACKAGE_NAME "GNU Bison"
| #define PACKAGE_TARNAME "bison"
| #define PACKAGE_VERSION "1.875"
| #define PACKAGE_STRING "GNU Bison 1.875"
| #define PACKAGE_BUGREPORT "bug-bison@gnu.org"
| #define PACKAGE "bison"
| #define VERSION "1.875"
| #define _GNU_SOURCE 1
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_UNISTD_H 1
| #define YYTEXT_POINTER 1
| #define M4 "/afs/eda/tools/gnu/bin/m4"
| #define STDC_HEADERS 1
| #define HAVE_CTYPE_H 1
| #define HAVE_LOCALE_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_UNISTD_H 1
| /* end confdefs.h.  */
| #ifndef __cplusplus
| typedef int foo_t;
| static inline foo_t static_foo () {return 0; }
| inline foo_t foo () {return 0; }
| #endif
| 
configure:4970: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
"configure", line 4986.39: 1506-277 (S) Syntax error: possible missing ';' or ','?
"configure", line 4986.8: 1506-485 (S) Parameter declaration list is incompatible with declarator for __inline__.
configure:4973: $? = 1
configure: failed program was:
| #line 4955 "configure"
| /* confdefs.h.  */
| 
| #define PACKAGE_NAME "GNU Bison"
| #define PACKAGE_TARNAME "bison"
| #define PACKAGE_VERSION "1.875"
| #define PACKAGE_STRING "GNU Bison 1.875"
| #define PACKAGE_BUGREPORT "bug-bison@gnu.org"
| #define PACKAGE "bison"
| #define VERSION "1.875"
| #define _GNU_SOURCE 1
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_UNISTD_H 1
| #define YYTEXT_POINTER 1
| #define M4 "/afs/eda/tools/gnu/bin/m4"
| #define STDC_HEADERS 1
| #define HAVE_CTYPE_H 1
| #define HAVE_LOCALE_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_UNISTD_H 1
| /* end confdefs.h.  */
| #ifndef __cplusplus
| typedef int foo_t;
| static __inline__ foo_t static_foo () {return 0; }
| __inline__ foo_t foo () {return 0; }
| #endif
| 
configure:4970: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
configure:4973: $? = 0
configure:4976: test -s conftest.o
configure:4979: $? = 0
configure:4991: result: __inline
configure:5008: checking for uintptr_t
configure:5033: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
configure:5036: $? = 0
configure:5039: test -s conftest.o
configure:5042: $? = 0
configure:5053: result: yes
configure:5068: checking for working alloca.h
configure:5090: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g   conftest.c  >&5
configure:5093: $? = 0
configure:5096: test -s conftest
configure:5099: $? = 0
configure:5110: result: yes
configure:5120: checking for alloca
configure:5162: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g   conftest.c  >&5
configure:5165: $? = 0
configure:5168: test -s conftest
configure:5171: $? = 0
configure:5182: result: yes
configure:5389: checking for obstacks
configure:5411: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g   conftest.c  >&5
"configure", line 5427.10: 1506-296 (S) #include file "obstack.h" not found.
configure:5414: $? = 1
configure: failed program was:
| #line 5394 "configure"
| /* confdefs.h.  */
| 
| #define PACKAGE_NAME "GNU Bison"
| #define PACKAGE_TARNAME "bison"
| #define PACKAGE_VERSION "1.875"
| #define PACKAGE_STRING "GNU Bison 1.875"
| #define PACKAGE_BUGREPORT "bug-bison@gnu.org"
| #define PACKAGE "bison"
| #define VERSION "1.875"
| #define _GNU_SOURCE 1
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_UNISTD_H 1
| #define YYTEXT_POINTER 1
| #define M4 "/afs/eda/tools/gnu/bin/m4"
| #define STDC_HEADERS 1
| #define HAVE_CTYPE_H 1
| #define HAVE_LOCALE_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_UNISTD_H 1
| #define inline __inline
| #define HAVE_UINTPTR_T 1
| #define HAVE_ALLOCA_H 1
| #define HAVE_ALLOCA 1
| /* end confdefs.h.  */
| #include "obstack.h"
| int
| main ()
| {
| struct obstack *mem; obstack_free(mem,(char *) 0)
|   ;
|   return 0;
| }
configure:5431: result: no
configure:5443: checking for error_at_line
configure:5465: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g   conftest.c  >&5
ld: 0711-317 ERROR: Undefined symbol: .error_at_line
ld: 0711-345 Use the -bloadmap or -bnoquiet option to obtain more information.
configure:5468: $? = 8
configure: failed program was:
| #line 5448 "configure"
| /* confdefs.h.  */
| 
| #define PACKAGE_NAME "GNU Bison"
| #define PACKAGE_TARNAME "bison"
| #define PACKAGE_VERSION "1.875"
| #define PACKAGE_STRING "GNU Bison 1.875"
| #define PACKAGE_BUGREPORT "bug-bison@gnu.org"
| #define PACKAGE "bison"
| #define VERSION "1.875"
| #define _GNU_SOURCE 1
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_UNISTD_H 1
| #define YYTEXT_POINTER 1
| #define M4 "/afs/eda/tools/gnu/bin/m4"
| #define STDC_HEADERS 1
| #define HAVE_CTYPE_H 1
| #define HAVE_LOCALE_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_UNISTD_H 1
| #define inline __inline
| #define HAVE_UINTPTR_T 1
| #define HAVE_ALLOCA_H 1
| #define HAVE_ALLOCA 1
| /* end confdefs.h.  */
| 
| int
| main ()
| {
| error_at_line (0, 0, "", 0, "");
|   ;
|   return 0;
| }
configure:5485: result: no
configure:5491: checking for working strnlen
configure:5531: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g   conftest.c  >&5
configure:5534: $? = 0
configure:5536: ./conftest
configure:5539: $? = 1
configure: program exited with status 1
configure: failed program was:
| #line 5499 "configure"
| /* confdefs.h.  */
| 
| #define PACKAGE_NAME "GNU Bison"
| #define PACKAGE_TARNAME "bison"
| #define PACKAGE_VERSION "1.875"
| #define PACKAGE_STRING "GNU Bison 1.875"
| #define PACKAGE_BUGREPORT "bug-bison@gnu.org"
| #define PACKAGE "bison"
| #define VERSION "1.875"
| #define _GNU_SOURCE 1
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_UNISTD_H 1
| #define YYTEXT_POINTER 1
| #define M4 "/afs/eda/tools/gnu/bin/m4"
| #define STDC_HEADERS 1
| #define HAVE_CTYPE_H 1
| #define HAVE_LOCALE_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_UNISTD_H 1
| #define inline __inline
| #define HAVE_UINTPTR_T 1
| #define HAVE_ALLOCA_H 1
| #define HAVE_ALLOCA 1
| /* end confdefs.h.  */
| 
| int
| main ()
| {
| 
| #define S "foobar"
| #define S_LEN (sizeof S - 1)
| 
|   /* At least one implementation is buggy: that of AIX 4.3 would
|      give strnlen (S, 1) == 3.  */
| 
|   int i;
|   for (i = 0; i < S_LEN + 1; ++i)
|     {
|       int expected = i <= S_LEN ? i : S_LEN;
|       if (strnlen (S, i) != expected)
| 	exit (1);
|     }
|   exit (0);
| 
|   ;
|   return 0;
| }
configure:5553: result: no
configure:5561: checking for setlocale
configure:5611: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g   conftest.c  >&5
configure:5614: $? = 0
configure:5617: test -s conftest
configure:5620: $? = 0
configure:5631: result: yes
configure:5641: checking whether free is declared
configure:5666: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
configure:5669: $? = 0
configure:5672: test -s conftest.o
configure:5675: $? = 0
configure:5686: result: yes
configure:5702: checking whether getenv is declared
configure:5727: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
configure:5730: $? = 0
configure:5733: test -s conftest.o
configure:5736: $? = 0
configure:5747: result: yes
configure:5763: checking whether getopt is declared
configure:5788: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
configure:5791: $? = 0
configure:5794: test -s conftest.o
configure:5797: $? = 0
configure:5808: result: yes
configure:5824: checking whether stpcpy is declared
configure:5849: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
configure:5852: $? = 0
configure:5855: test -s conftest.o
configure:5858: $? = 0
configure:5869: result: yes
configure:5885: checking whether strchr is declared
configure:5910: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
configure:5913: $? = 0
configure:5916: test -s conftest.o
configure:5919: $? = 0
configure:5930: result: yes
configure:5946: checking whether strspn is declared
configure:5971: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
configure:5974: $? = 0
configure:5977: test -s conftest.o
configure:5980: $? = 0
configure:5991: result: yes
configure:6007: checking whether strnlen is declared
configure:6032: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
configure:6035: $? = 0
configure:6038: test -s conftest.o
configure:6041: $? = 0
configure:6052: result: yes
configure:6068: checking whether malloc is declared
configure:6093: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
configure:6096: $? = 0
configure:6099: test -s conftest.o
configure:6102: $? = 0
configure:6113: result: yes
configure:6129: checking whether memchr is declared
configure:6154: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
configure:6157: $? = 0
configure:6160: test -s conftest.o
configure:6163: $? = 0
configure:6174: result: yes
configure:6190: checking whether memrchr is declared
configure:6215: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
"configure", line 6276.22: 1506-045 (S) Undeclared identifier memrchr.
configure:6218: $? = 1
configure: failed program was:
| #line 6195 "configure"
| /* confdefs.h.  */
| 
| #define PACKAGE_NAME "GNU Bison"
| #define PACKAGE_TARNAME "bison"
| #define PACKAGE_VERSION "1.875"
| #define PACKAGE_STRING "GNU Bison 1.875"
| #define PACKAGE_BUGREPORT "bug-bison@gnu.org"
| #define PACKAGE "bison"
| #define VERSION "1.875"
| #define _GNU_SOURCE 1
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_UNISTD_H 1
| #define YYTEXT_POINTER 1
| #define M4 "/afs/eda/tools/gnu/bin/m4"
| #define STDC_HEADERS 1
| #define HAVE_CTYPE_H 1
| #define HAVE_LOCALE_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_UNISTD_H 1
| #define inline __inline
| #define HAVE_UINTPTR_T 1
| #define HAVE_ALLOCA_H 1
| #define HAVE_ALLOCA 1
| #define HAVE_SETLOCALE 1
| #define HAVE_DECL_FREE 1
| #define HAVE_DECL_GETENV 1
| #define HAVE_DECL_GETOPT 1
| #define HAVE_DECL_STPCPY 1
| #define HAVE_DECL_STRCHR 1
| #define HAVE_DECL_STRSPN 1
| #define HAVE_DECL_STRNLEN 1
| #define HAVE_DECL_MALLOC 1
| #define HAVE_DECL_MEMCHR 1
| /* end confdefs.h.  */
| #include <stdio.h>
| #if HAVE_SYS_TYPES_H
| # include <sys/types.h>
| #endif
| #if HAVE_SYS_STAT_H
| # include <sys/stat.h>
| #endif
| #if STDC_HEADERS
| # include <stdlib.h>
| # include <stddef.h>
| #else
| # if HAVE_STDLIB_H
| #  include <stdlib.h>
| # endif
| #endif
| #if HAVE_STRING_H
| # if !STDC_HEADERS && HAVE_MEMORY_H
| #  include <memory.h>
| # endif
| # include <string.h>
| #endif
| #if HAVE_STRINGS_H
| # include <strings.h>
| #endif
| #if HAVE_INTTYPES_H
| # include <inttypes.h>
| #else
| # if HAVE_STDINT_H
| #  include <stdint.h>
| # endif
| #endif
| #if HAVE_UNISTD_H
| # include <unistd.h>
| #endif
| int
| main ()
| {
| #ifndef memrchr
|   char *p = (char *) memrchr;
| #endif
| 
|   ;
|   return 0;
| }
configure:6235: result: no
configure:6265: checking for memchr
configure:6315: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g   conftest.c  >&5
configure:6318: $? = 0
configure:6321: test -s conftest
configure:6324: $? = 0
configure:6335: result: yes
configure:6265: checking for memrchr
configure:6315: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g   conftest.c  >&5
ld: 0711-317 ERROR: Undefined symbol: memrchr
ld: 0711-345 Use the -bloadmap or -bnoquiet option to obtain more information.
configure:6318: $? = 8
configure: failed program was:
| #line 6270 "configure"
| /* confdefs.h.  */
| 
| #define PACKAGE_NAME "GNU Bison"
| #define PACKAGE_TARNAME "bison"
| #define PACKAGE_VERSION "1.875"
| #define PACKAGE_STRING "GNU Bison 1.875"
| #define PACKAGE_BUGREPORT "bug-bison@gnu.org"
| #define PACKAGE "bison"
| #define VERSION "1.875"
| #define _GNU_SOURCE 1
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_UNISTD_H 1
| #define YYTEXT_POINTER 1
| #define M4 "/afs/eda/tools/gnu/bin/m4"
| #define STDC_HEADERS 1
| #define HAVE_CTYPE_H 1
| #define HAVE_LOCALE_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_UNISTD_H 1
| #define inline __inline
| #define HAVE_UINTPTR_T 1
| #define HAVE_ALLOCA_H 1
| #define HAVE_ALLOCA 1
| #define HAVE_SETLOCALE 1
| #define HAVE_DECL_FREE 1
| #define HAVE_DECL_GETENV 1
| #define HAVE_DECL_GETOPT 1
| #define HAVE_DECL_STPCPY 1
| #define HAVE_DECL_STRCHR 1
| #define HAVE_DECL_STRSPN 1
| #define HAVE_DECL_STRNLEN 1
| #define HAVE_DECL_MALLOC 1
| #define HAVE_DECL_MEMCHR 1
| #define HAVE_DECL_MEMRCHR 0
| #define HAVE_MEMCHR 1
| /* end confdefs.h.  */
| /* System header to define __stub macros and hopefully few prototypes,
|     which can conflict with char memrchr (); below.
|     Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
|     <limits.h> exists even on freestanding compilers.  */
| #ifdef __STDC__
| # include <limits.h>
| #else
| # include <assert.h>
| #endif
| /* Override any gcc2 internal prototype to avoid an error.  */
| #ifdef __cplusplus
| extern "C"
| {
| #endif
| /* We use char because int might match the return type of a gcc2
|    builtin and then its argument prototype would still apply.  */
| char memrchr ();
| /* The GNU C library defines this for functions which it implements
|     to always fail with ENOSYS.  Some functions are actually named
|     something starting with __ and the normal name is an alias.  */
| #if defined (__stub_memrchr) || defined (__stub___memrchr)
| choke me
| #else
| char (*f) () = memrchr;
| #endif
| #ifdef __cplusplus
| }
| #endif
| 
| int
| main ()
| {
| return f != memrchr;
|   ;
|   return 0;
| }
configure:6335: result: no
configure:6265: checking for strchr
configure:6315: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g   conftest.c  >&5
configure:6318: $? = 0
configure:6321: test -s conftest
configure:6324: $? = 0
configure:6335: result: yes
configure:6265: checking for stpcpy
configure:6315: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g   conftest.c  >&5
configure:6318: $? = 0
configure:6321: test -s conftest
configure:6324: $? = 0
configure:6335: result: yes
configure:6265: checking for strrchr
configure:6315: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g   conftest.c  >&5
configure:6318: $? = 0
configure:6321: test -s conftest
configure:6324: $? = 0
configure:6335: result: yes
configure:6265: checking for strspn
configure:6315: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g   conftest.c  >&5
configure:6318: $? = 0
configure:6321: test -s conftest
configure:6324: $? = 0
configure:6335: result: yes
configure:6265: checking for strtol
configure:6315: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g   conftest.c  >&5
configure:6318: $? = 0
configure:6321: test -s conftest
configure:6324: $? = 0
configure:6335: result: yes
configure:6265: checking for strtoul
configure:6315: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g   conftest.c  >&5
configure:6318: $? = 0
configure:6321: test -s conftest
configure:6324: $? = 0
configure:6335: result: yes
configure:6353: checking for stdlib.h
configure:6358: result: yes
configure:6490: checking for GNU libc compatible malloc
configure:6520: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g   conftest.c  >&5
configure:6523: $? = 0
configure:6525: ./conftest
configure:6528: $? = 1
configure: program exited with status 1
configure: failed program was:
| #line 6498 "configure"
| /* confdefs.h.  */
| 
| #define PACKAGE_NAME "GNU Bison"
| #define PACKAGE_TARNAME "bison"
| #define PACKAGE_VERSION "1.875"
| #define PACKAGE_STRING "GNU Bison 1.875"
| #define PACKAGE_BUGREPORT "bug-bison@gnu.org"
| #define PACKAGE "bison"
| #define VERSION "1.875"
| #define _GNU_SOURCE 1
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_UNISTD_H 1
| #define YYTEXT_POINTER 1
| #define M4 "/afs/eda/tools/gnu/bin/m4"
| #define STDC_HEADERS 1
| #define HAVE_CTYPE_H 1
| #define HAVE_LOCALE_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_UNISTD_H 1
| #define inline __inline
| #define HAVE_UINTPTR_T 1
| #define HAVE_ALLOCA_H 1
| #define HAVE_ALLOCA 1
| #define HAVE_SETLOCALE 1
| #define HAVE_DECL_FREE 1
| #define HAVE_DECL_GETENV 1
| #define HAVE_DECL_GETOPT 1
| #define HAVE_DECL_STPCPY 1
| #define HAVE_DECL_STRCHR 1
| #define HAVE_DECL_STRSPN 1
| #define HAVE_DECL_STRNLEN 1
| #define HAVE_DECL_MALLOC 1
| #define HAVE_DECL_MEMCHR 1
| #define HAVE_DECL_MEMRCHR 0
| #define HAVE_MEMCHR 1
| #define HAVE_STRCHR 1
| #define HAVE_STPCPY 1
| #define HAVE_STRRCHR 1
| #define HAVE_STRSPN 1
| #define HAVE_STRTOL 1
| #define HAVE_STRTOUL 1
| #define HAVE_STDLIB_H 1
| /* end confdefs.h.  */
| #if STDC_HEADERS || HAVE_STDLIB_H
| # include <stdlib.h>
| #else
| char *malloc ();
| #endif
| 
| int
| main ()
| {
| exit (malloc (0) ? 0 : 1);
|   ;
|   return 0;
| }
configure:6542: result: no
configure:6570: checking for stdlib.h
configure:6575: result: yes
configure:6707: checking for GNU libc compatible realloc
configure:6737: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g   conftest.c  >&5
configure:6740: $? = 0
configure:6742: ./conftest
configure:6745: $? = 1
configure: program exited with status 1
configure: failed program was:
| #line 6715 "configure"
| /* confdefs.h.  */
| 
| #define PACKAGE_NAME "GNU Bison"
| #define PACKAGE_TARNAME "bison"
| #define PACKAGE_VERSION "1.875"
| #define PACKAGE_STRING "GNU Bison 1.875"
| #define PACKAGE_BUGREPORT "bug-bison@gnu.org"
| #define PACKAGE "bison"
| #define VERSION "1.875"
| #define _GNU_SOURCE 1
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_UNISTD_H 1
| #define YYTEXT_POINTER 1
| #define M4 "/afs/eda/tools/gnu/bin/m4"
| #define STDC_HEADERS 1
| #define HAVE_CTYPE_H 1
| #define HAVE_LOCALE_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_UNISTD_H 1
| #define inline __inline
| #define HAVE_UINTPTR_T 1
| #define HAVE_ALLOCA_H 1
| #define HAVE_ALLOCA 1
| #define HAVE_SETLOCALE 1
| #define HAVE_DECL_FREE 1
| #define HAVE_DECL_GETENV 1
| #define HAVE_DECL_GETOPT 1
| #define HAVE_DECL_STPCPY 1
| #define HAVE_DECL_STRCHR 1
| #define HAVE_DECL_STRSPN 1
| #define HAVE_DECL_STRNLEN 1
| #define HAVE_DECL_MALLOC 1
| #define HAVE_DECL_MEMCHR 1
| #define HAVE_DECL_MEMRCHR 0
| #define HAVE_MEMCHR 1
| #define HAVE_STRCHR 1
| #define HAVE_STPCPY 1
| #define HAVE_STRRCHR 1
| #define HAVE_STRSPN 1
| #define HAVE_STRTOL 1
| #define HAVE_STRTOUL 1
| #define HAVE_STDLIB_H 1
| #define HAVE_MALLOC 0
| #define malloc rpl_malloc
| #define HAVE_STDLIB_H 1
| /* end confdefs.h.  */
| #if STDC_HEADERS || HAVE_STDLIB_H
| # include <stdlib.h>
| #else
| char *realloc ();
| #endif
| 
| int
| main ()
| {
| exit (realloc (0, 0) ? 0 : 1);
|   ;
|   return 0;
| }
configure:6759: result: no
configure:6798: checking wchar.h usability
configure:6811: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
configure:6814: $? = 0
configure:6817: test -s conftest.o
configure:6820: $? = 0
configure:6830: result: yes
configure:6834: checking wchar.h presence
configure:6845: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -E  conftest.c
configure:6851: $? = 0
configure:6870: result: yes
configure:6906: checking for wchar.h
configure:6913: result: yes
configure:6798: checking wctype.h usability
configure:6811: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
configure:6814: $? = 0
configure:6817: test -s conftest.o
configure:6820: $? = 0
configure:6830: result: yes
configure:6834: checking wctype.h presence
configure:6845: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -E  conftest.c
configure:6851: $? = 0
configure:6870: result: yes
configure:6906: checking for wctype.h
configure:6913: result: yes
configure:6934: checking for isascii
configure:6984: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g   conftest.c  >&5
configure:6987: $? = 0
configure:6990: test -s conftest
configure:6993: $? = 0
configure:7004: result: yes
configure:6934: checking for iswcntrl
configure:6984: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g   conftest.c  >&5
configure:6987: $? = 0
configure:6990: test -s conftest
configure:6993: $? = 0
configure:7004: result: yes
configure:6934: checking for iswprint
configure:6984: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g   conftest.c  >&5
configure:6987: $? = 0
configure:6990: test -s conftest
configure:6993: $? = 0
configure:7004: result: yes
configure:6934: checking for mbsinit
configure:6984: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g   conftest.c  >&5
configure:6987: $? = 0
configure:6990: test -s conftest
configure:6993: $? = 0
configure:7004: result: yes
configure:6934: checking for wcwidth
configure:6984: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g   conftest.c  >&5
configure:6987: $? = 0
configure:6990: test -s conftest
configure:6993: $? = 0
configure:7004: result: yes
configure:7015: checking whether mbrtowc and mbstate_t are properly declared
configure:7037: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g   conftest.c  >&5
configure:7040: $? = 0
configure:7043: test -s conftest
configure:7046: $? = 0
configure:7057: result: yes
configure:7068: checking whether wcwidth is declared
configure:7102: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
configure:7105: $? = 0
configure:7108: test -s conftest.o
configure:7111: $? = 0
configure:7122: result: yes
configure:7135: checking for mbstate_t
configure:7158: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
configure:7161: $? = 0
configure:7164: test -s conftest.o
configure:7167: $? = 0
configure:7178: result: yes
configure:7194: checking for working memcmp
configure:7243: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g   conftest.c  >&5
configure:7246: $? = 0
configure:7248: ./conftest
configure:7251: $? = 0
configure:7265: result: yes
configure:7275: checking for isascii
configure:7345: result: yes
configure:7275: checking for iswprint
configure:7345: result: yes
configure:7356: checking whether mbrtowc and mbstate_t are properly declared
configure:7398: result: yes
configure:7435: checking limits.h usability
configure:7448: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
configure:7451: $? = 0
configure:7454: test -s conftest.o
configure:7457: $? = 0
configure:7467: result: yes
configure:7471: checking limits.h presence
configure:7482: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -E  conftest.c
configure:7488: $? = 0
configure:7507: result: yes
configure:7543: checking for limits.h
configure:7550: result: yes
configure:7435: checking stddef.h usability
configure:7448: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
configure:7451: $? = 0
configure:7454: test -s conftest.o
configure:7457: $? = 0
configure:7467: result: yes
configure:7471: checking stddef.h presence
configure:7482: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -E  conftest.c
configure:7488: $? = 0
configure:7507: result: yes
configure:7543: checking for stddef.h
configure:7550: result: yes
configure:7426: checking for stdlib.h
configure:7431: result: yes
configure:7426: checking for string.h
configure:7431: result: yes
configure:7426: checking for wchar.h
configure:7431: result: yes
configure:7426: checking for wctype.h
configure:7431: result: yes
configure:7563: checking for ANSI C header files
configure:7713: result: yes
configure:7724: checking whether backslash-a works in strings
configure:7753: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
configure:7756: $? = 0
configure:7759: test -s conftest.o
configure:7762: $? = 0
configure:7773: result: yes
configure:7783: checking for mbstate_t
configure:7826: result: yes
configure:7843: checking for function prototypes
configure:7846: result: yes
configure:7860: checking for ANSI C header files
configure:8010: result: yes
configure:8025: checking for string.h
configure:8030: result: yes
configure:8171: checking for strcasecmp
configure:8221: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g   conftest.c  >&5
configure:8224: $? = 0
configure:8227: test -s conftest
configure:8230: $? = 0
configure:8241: result: yes
configure:8171: checking for strncasecmp
configure:8221: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g   conftest.c  >&5
configure:8224: $? = 0
configure:8227: test -s conftest
configure:8230: $? = 0
configure:8241: result: yes
configure:8267: checking for strerror
configure:8317: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g   conftest.c  >&5
configure:8320: $? = 0
configure:8323: test -s conftest
configure:8326: $? = 0
configure:8337: result: yes
configure:8267: checking for vprintf
configure:8317: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g   conftest.c  >&5
configure:8320: $? = 0
configure:8323: test -s conftest
configure:8326: $? = 0
configure:8337: result: yes
configure:8267: checking for doprnt
configure:8317: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g   conftest.c  >&5
ld: 0711-317 ERROR: Undefined symbol: doprnt
ld: 0711-345 Use the -bloadmap or -bnoquiet option to obtain more information.
configure:8320: $? = 8
configure: failed program was:
| #line 8272 "configure"
| /* confdefs.h.  */
| 
| #define PACKAGE_NAME "GNU Bison"
| #define PACKAGE_TARNAME "bison"
| #define PACKAGE_VERSION "1.875"
| #define PACKAGE_STRING "GNU Bison 1.875"
| #define PACKAGE_BUGREPORT "bug-bison@gnu.org"
| #define PACKAGE "bison"
| #define VERSION "1.875"
| #define _GNU_SOURCE 1
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_UNISTD_H 1
| #define YYTEXT_POINTER 1
| #define M4 "/afs/eda/tools/gnu/bin/m4"
| #define STDC_HEADERS 1
| #define HAVE_CTYPE_H 1
| #define HAVE_LOCALE_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_UNISTD_H 1
| #define inline __inline
| #define HAVE_UINTPTR_T 1
| #define HAVE_ALLOCA_H 1
| #define HAVE_ALLOCA 1
| #define HAVE_SETLOCALE 1
| #define HAVE_DECL_FREE 1
| #define HAVE_DECL_GETENV 1
| #define HAVE_DECL_GETOPT 1
| #define HAVE_DECL_STPCPY 1
| #define HAVE_DECL_STRCHR 1
| #define HAVE_DECL_STRSPN 1
| #define HAVE_DECL_STRNLEN 1
| #define HAVE_DECL_MALLOC 1
| #define HAVE_DECL_MEMCHR 1
| #define HAVE_DECL_MEMRCHR 0
| #define HAVE_MEMCHR 1
| #define HAVE_STRCHR 1
| #define HAVE_STPCPY 1
| #define HAVE_STRRCHR 1
| #define HAVE_STRSPN 1
| #define HAVE_STRTOL 1
| #define HAVE_STRTOUL 1
| #define HAVE_STDLIB_H 1
| #define HAVE_MALLOC 0
| #define malloc rpl_malloc
| #define HAVE_STDLIB_H 1
| #define HAVE_REALLOC 0
| #define realloc rpl_realloc
| #define HAVE_WCHAR_H 1
| #define HAVE_WCTYPE_H 1
| #define HAVE_ISASCII 1
| #define HAVE_ISWCNTRL 1
| #define HAVE_ISWPRINT 1
| #define HAVE_MBSINIT 1
| #define HAVE_WCWIDTH 1
| #define HAVE_MBRTOWC 1
| #define HAVE_DECL_WCWIDTH 1
| #define HAVE_MBSTATE_T 1
| #define HAVE_ISASCII 1
| #define HAVE_ISWPRINT 1
| #define HAVE_MBRTOWC 1
| #define HAVE_LIMITS_H 1
| #define HAVE_STDDEF_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_WCHAR_H 1
| #define HAVE_WCTYPE_H 1
| #define STDC_HEADERS 1
| #define HAVE_C_BACKSLASH_A 1
| #define HAVE_MBSTATE_T 1
| #define PROTOTYPES 1
| #define STDC_HEADERS 1
| #define HAVE_STRING_H 1
| #define HAVE_STRCASECMP 1
| #define HAVE_STRNCASECMP 1
| #define HAVE_STRERROR 1
| #define HAVE_VPRINTF 1
| /* end confdefs.h.  */
| /* System header to define __stub macros and hopefully few prototypes,
|     which can conflict with char doprnt (); below.
|     Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
|     <limits.h> exists even on freestanding compilers.  */
| #ifdef __STDC__
| # include <limits.h>
| #else
| # include <assert.h>
| #endif
| /* Override any gcc2 internal prototype to avoid an error.  */
| #ifdef __cplusplus
| extern "C"
| {
| #endif
| /* We use char because int might match the return type of a gcc2
|    builtin and then its argument prototype would still apply.  */
| char doprnt ();
| /* The GNU C library defines this for functions which it implements
|     to always fail with ENOSYS.  Some functions are actually named
|     something starting with __ and the normal name is an alias.  */
| #if defined (__stub_doprnt) || defined (__stub___doprnt)
| choke me
| #else
| char (*f) () = doprnt;
| #endif
| #ifdef __cplusplus
| }
| #endif
| 
| int
| main ()
| {
| return f != doprnt;
|   ;
|   return 0;
| }
configure:8337: result: no
configure:8347: checking whether strerror is declared
configure:8372: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
configure:8375: $? = 0
configure:8378: test -s conftest.o
configure:8381: $? = 0
configure:8392: result: yes
configure:8410: checking whether strerror_r is declared
configure:8435: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
"configure", line 8540.22: 1506-045 (S) Undeclared identifier strerror_r.
configure:8438: $? = 1
configure: failed program was:
| #line 8415 "configure"
| /* confdefs.h.  */
| 
| #define PACKAGE_NAME "GNU Bison"
| #define PACKAGE_TARNAME "bison"
| #define PACKAGE_VERSION "1.875"
| #define PACKAGE_STRING "GNU Bison 1.875"
| #define PACKAGE_BUGREPORT "bug-bison@gnu.org"
| #define PACKAGE "bison"
| #define VERSION "1.875"
| #define _GNU_SOURCE 1
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_UNISTD_H 1
| #define YYTEXT_POINTER 1
| #define M4 "/afs/eda/tools/gnu/bin/m4"
| #define STDC_HEADERS 1
| #define HAVE_CTYPE_H 1
| #define HAVE_LOCALE_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_UNISTD_H 1
| #define inline __inline
| #define HAVE_UINTPTR_T 1
| #define HAVE_ALLOCA_H 1
| #define HAVE_ALLOCA 1
| #define HAVE_SETLOCALE 1
| #define HAVE_DECL_FREE 1
| #define HAVE_DECL_GETENV 1
| #define HAVE_DECL_GETOPT 1
| #define HAVE_DECL_STPCPY 1
| #define HAVE_DECL_STRCHR 1
| #define HAVE_DECL_STRSPN 1
| #define HAVE_DECL_STRNLEN 1
| #define HAVE_DECL_MALLOC 1
| #define HAVE_DECL_MEMCHR 1
| #define HAVE_DECL_MEMRCHR 0
| #define HAVE_MEMCHR 1
| #define HAVE_STRCHR 1
| #define HAVE_STPCPY 1
| #define HAVE_STRRCHR 1
| #define HAVE_STRSPN 1
| #define HAVE_STRTOL 1
| #define HAVE_STRTOUL 1
| #define HAVE_STDLIB_H 1
| #define HAVE_MALLOC 0
| #define malloc rpl_malloc
| #define HAVE_STDLIB_H 1
| #define HAVE_REALLOC 0
| #define realloc rpl_realloc
| #define HAVE_WCHAR_H 1
| #define HAVE_WCTYPE_H 1
| #define HAVE_ISASCII 1
| #define HAVE_ISWCNTRL 1
| #define HAVE_ISWPRINT 1
| #define HAVE_MBSINIT 1
| #define HAVE_WCWIDTH 1
| #define HAVE_MBRTOWC 1
| #define HAVE_DECL_WCWIDTH 1
| #define HAVE_MBSTATE_T 1
| #define HAVE_ISASCII 1
| #define HAVE_ISWPRINT 1
| #define HAVE_MBRTOWC 1
| #define HAVE_LIMITS_H 1
| #define HAVE_STDDEF_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_WCHAR_H 1
| #define HAVE_WCTYPE_H 1
| #define STDC_HEADERS 1
| #define HAVE_C_BACKSLASH_A 1
| #define HAVE_MBSTATE_T 1
| #define PROTOTYPES 1
| #define STDC_HEADERS 1
| #define HAVE_STRING_H 1
| #define HAVE_STRCASECMP 1
| #define HAVE_STRNCASECMP 1
| #define HAVE_STRERROR 1
| #define HAVE_VPRINTF 1
| #define HAVE_DECL_STRERROR 1
| /* end confdefs.h.  */
| #include <stdio.h>
| #if HAVE_SYS_TYPES_H
| # include <sys/types.h>
| #endif
| #if HAVE_SYS_STAT_H
| # include <sys/stat.h>
| #endif
| #if STDC_HEADERS
| # include <stdlib.h>
| # include <stddef.h>
| #else
| # if HAVE_STDLIB_H
| #  include <stdlib.h>
| # endif
| #endif
| #if HAVE_STRING_H
| # if !STDC_HEADERS && HAVE_MEMORY_H
| #  include <memory.h>
| # endif
| # include <string.h>
| #endif
| #if HAVE_STRINGS_H
| # include <strings.h>
| #endif
| #if HAVE_INTTYPES_H
| # include <inttypes.h>
| #else
| # if HAVE_STDINT_H
| #  include <stdint.h>
| # endif
| #endif
| #if HAVE_UNISTD_H
| # include <unistd.h>
| #endif
| int
| main ()
| {
| #ifndef strerror_r
|   char *p = (char *) strerror_r;
| #endif
| 
|   ;
|   return 0;
| }
configure:8455: result: no
configure:8477: checking for strerror_r
configure:8527: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g   conftest.c  >&5
configure:8530: $? = 0
configure:8533: test -s conftest
configure:8536: $? = 0
configure:8547: result: yes
configure:8557: checking whether strerror_r returns char *
configure:8634: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g   conftest.c  >&5
configure:8637: $? = 0
configure:8639: ./conftest
configure:8642: $? = 1
configure: program exited with status 1
configure: failed program was:
| #line 8614 "configure"
| /* confdefs.h.  */
| 
| #define PACKAGE_NAME "GNU Bison"
| #define PACKAGE_TARNAME "bison"
| #define PACKAGE_VERSION "1.875"
| #define PACKAGE_STRING "GNU Bison 1.875"
| #define PACKAGE_BUGREPORT "bug-bison@gnu.org"
| #define PACKAGE "bison"
| #define VERSION "1.875"
| #define _GNU_SOURCE 1
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_UNISTD_H 1
| #define YYTEXT_POINTER 1
| #define M4 "/afs/eda/tools/gnu/bin/m4"
| #define STDC_HEADERS 1
| #define HAVE_CTYPE_H 1
| #define HAVE_LOCALE_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_UNISTD_H 1
| #define inline __inline
| #define HAVE_UINTPTR_T 1
| #define HAVE_ALLOCA_H 1
| #define HAVE_ALLOCA 1
| #define HAVE_SETLOCALE 1
| #define HAVE_DECL_FREE 1
| #define HAVE_DECL_GETENV 1
| #define HAVE_DECL_GETOPT 1
| #define HAVE_DECL_STPCPY 1
| #define HAVE_DECL_STRCHR 1
| #define HAVE_DECL_STRSPN 1
| #define HAVE_DECL_STRNLEN 1
| #define HAVE_DECL_MALLOC 1
| #define HAVE_DECL_MEMCHR 1
| #define HAVE_DECL_MEMRCHR 0
| #define HAVE_MEMCHR 1
| #define HAVE_STRCHR 1
| #define HAVE_STPCPY 1
| #define HAVE_STRRCHR 1
| #define HAVE_STRSPN 1
| #define HAVE_STRTOL 1
| #define HAVE_STRTOUL 1
| #define HAVE_STDLIB_H 1
| #define HAVE_MALLOC 0
| #define malloc rpl_malloc
| #define HAVE_STDLIB_H 1
| #define HAVE_REALLOC 0
| #define realloc rpl_realloc
| #define HAVE_WCHAR_H 1
| #define HAVE_WCTYPE_H 1
| #define HAVE_ISASCII 1
| #define HAVE_ISWCNTRL 1
| #define HAVE_ISWPRINT 1
| #define HAVE_MBSINIT 1
| #define HAVE_WCWIDTH 1
| #define HAVE_MBRTOWC 1
| #define HAVE_DECL_WCWIDTH 1
| #define HAVE_MBSTATE_T 1
| #define HAVE_ISASCII 1
| #define HAVE_ISWPRINT 1
| #define HAVE_MBRTOWC 1
| #define HAVE_LIMITS_H 1
| #define HAVE_STDDEF_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_WCHAR_H 1
| #define HAVE_WCTYPE_H 1
| #define STDC_HEADERS 1
| #define HAVE_C_BACKSLASH_A 1
| #define HAVE_MBSTATE_T 1
| #define PROTOTYPES 1
| #define STDC_HEADERS 1
| #define HAVE_STRING_H 1
| #define HAVE_STRCASECMP 1
| #define HAVE_STRNCASECMP 1
| #define HAVE_STRERROR 1
| #define HAVE_VPRINTF 1
| #define HAVE_DECL_STRERROR 1
| #define HAVE_DECL_STRERROR_R 0
| #define HAVE_STRERROR_R 1
| /* end confdefs.h.  */
| #include <stdio.h>
| #if HAVE_SYS_TYPES_H
| # include <sys/types.h>
| #endif
| #if HAVE_SYS_STAT_H
| # include <sys/stat.h>
| #endif
| #if STDC_HEADERS
| # include <stdlib.h>
| # include <stddef.h>
| #else
| # if HAVE_STDLIB_H
| #  include <stdlib.h>
| # endif
| #endif
| #if HAVE_STRING_H
| # if !STDC_HEADERS && HAVE_MEMORY_H
| #  include <memory.h>
| # endif
| # include <string.h>
| #endif
| #if HAVE_STRINGS_H
| # include <strings.h>
| #endif
| #if HAVE_INTTYPES_H
| # include <inttypes.h>
| #else
| # if HAVE_STDINT_H
| #  include <stdint.h>
| # endif
| #endif
| #if HAVE_UNISTD_H
| # include <unistd.h>
| #endif
| 	extern char *strerror_r ();
| int
| main ()
| {
| char buf[100];
| 	  char x = *strerror_r (0, buf, sizeof buf);
| 	  exit (!isalpha (x));
|   ;
|   return 0;
| }
configure:8656: result: no
configure:8666: checking for ANSI C header files
configure:8816: result: yes
configure:8827: checking if malloc debugging is wanted
configure:8848: result: no
configure:8853: checking for pid_t
configure:8878: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
configure:8881: $? = 0
configure:8884: test -s conftest.o
configure:8887: $? = 0
configure:8898: result: yes
configure:8925: checking fcntl.h usability
configure:8938: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
configure:8941: $? = 0
configure:8944: test -s conftest.o
configure:8947: $? = 0
configure:8957: result: yes
configure:8961: checking fcntl.h presence
configure:8972: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -E  conftest.c
configure:8978: $? = 0
configure:8997: result: yes
configure:9033: checking for fcntl.h
configure:9040: result: yes
configure:8925: checking sys/wait.h usability
configure:8938: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
configure:8941: $? = 0
configure:8944: test -s conftest.o
configure:8947: $? = 0
configure:8957: result: yes
configure:8961: checking sys/wait.h presence
configure:8972: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -E  conftest.c
configure:8978: $? = 0
configure:8997: result: yes
configure:9033: checking for sys/wait.h
configure:9040: result: yes
configure:9053: checking for sys/wait.h that is POSIX.1 compatible
configure:9105: result: yes
configure:9120: checking for dup2
configure:9170: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g   conftest.c  >&5
configure:9173: $? = 0
configure:9176: test -s conftest
configure:9179: $? = 0
configure:9190: result: yes
configure:9120: checking for waitpid
configure:9170: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g   conftest.c  >&5
configure:9173: $? = 0
configure:9176: test -s conftest
configure:9179: $? = 0
configure:9190: result: yes
configure:9206: checking for unistd.h
configure:9211: result: yes
configure:9215: checking vfork.h usability
configure:9228: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
"configure", line 9347.10: 1506-296 (S) #include file <vfork.h> not found.
configure:9231: $? = 1
configure: failed program was:
| #line 9217 "configure"
| /* confdefs.h.  */
| 
| #define PACKAGE_NAME "GNU Bison"
| #define PACKAGE_TARNAME "bison"
| #define PACKAGE_VERSION "1.875"
| #define PACKAGE_STRING "GNU Bison 1.875"
| #define PACKAGE_BUGREPORT "bug-bison@gnu.org"
| #define PACKAGE "bison"
| #define VERSION "1.875"
| #define _GNU_SOURCE 1
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_UNISTD_H 1
| #define YYTEXT_POINTER 1
| #define M4 "/afs/eda/tools/gnu/bin/m4"
| #define STDC_HEADERS 1
| #define HAVE_CTYPE_H 1
| #define HAVE_LOCALE_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_UNISTD_H 1
| #define inline __inline
| #define HAVE_UINTPTR_T 1
| #define HAVE_ALLOCA_H 1
| #define HAVE_ALLOCA 1
| #define HAVE_SETLOCALE 1
| #define HAVE_DECL_FREE 1
| #define HAVE_DECL_GETENV 1
| #define HAVE_DECL_GETOPT 1
| #define HAVE_DECL_STPCPY 1
| #define HAVE_DECL_STRCHR 1
| #define HAVE_DECL_STRSPN 1
| #define HAVE_DECL_STRNLEN 1
| #define HAVE_DECL_MALLOC 1
| #define HAVE_DECL_MEMCHR 1
| #define HAVE_DECL_MEMRCHR 0
| #define HAVE_MEMCHR 1
| #define HAVE_STRCHR 1
| #define HAVE_STPCPY 1
| #define HAVE_STRRCHR 1
| #define HAVE_STRSPN 1
| #define HAVE_STRTOL 1
| #define HAVE_STRTOUL 1
| #define HAVE_STDLIB_H 1
| #define HAVE_MALLOC 0
| #define malloc rpl_malloc
| #define HAVE_STDLIB_H 1
| #define HAVE_REALLOC 0
| #define realloc rpl_realloc
| #define HAVE_WCHAR_H 1
| #define HAVE_WCTYPE_H 1
| #define HAVE_ISASCII 1
| #define HAVE_ISWCNTRL 1
| #define HAVE_ISWPRINT 1
| #define HAVE_MBSINIT 1
| #define HAVE_WCWIDTH 1
| #define HAVE_MBRTOWC 1
| #define HAVE_DECL_WCWIDTH 1
| #define HAVE_MBSTATE_T 1
| #define HAVE_ISASCII 1
| #define HAVE_ISWPRINT 1
| #define HAVE_MBRTOWC 1
| #define HAVE_LIMITS_H 1
| #define HAVE_STDDEF_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_WCHAR_H 1
| #define HAVE_WCTYPE_H 1
| #define STDC_HEADERS 1
| #define HAVE_C_BACKSLASH_A 1
| #define HAVE_MBSTATE_T 1
| #define PROTOTYPES 1
| #define STDC_HEADERS 1
| #define HAVE_STRING_H 1
| #define HAVE_STRCASECMP 1
| #define HAVE_STRNCASECMP 1
| #define HAVE_STRERROR 1
| #define HAVE_VPRINTF 1
| #define HAVE_DECL_STRERROR 1
| #define HAVE_DECL_STRERROR_R 0
| #define HAVE_STRERROR_R 1
| #define STDC_HEADERS 1
| #define HAVE_FCNTL_H 1
| #define HAVE_SYS_WAIT_H 1
| #define HAVE_SYS_WAIT_H 1
| #define HAVE_DUP2 1
| #define HAVE_WAITPID 1
| #define HAVE_UNISTD_H 1
| /* end confdefs.h.  */
| #include <stdio.h>
| #if HAVE_SYS_TYPES_H
| # include <sys/types.h>
| #endif
| #if HAVE_SYS_STAT_H
| # include <sys/stat.h>
| #endif
| #if STDC_HEADERS
| # include <stdlib.h>
| # include <stddef.h>
| #else
| # if HAVE_STDLIB_H
| #  include <stdlib.h>
| # endif
| #endif
| #if HAVE_STRING_H
| # if !STDC_HEADERS && HAVE_MEMORY_H
| #  include <memory.h>
| # endif
| # include <string.h>
| #endif
| #if HAVE_STRINGS_H
| # include <strings.h>
| #endif
| #if HAVE_INTTYPES_H
| # include <inttypes.h>
| #else
| # if HAVE_STDINT_H
| #  include <stdint.h>
| # endif
| #endif
| #if HAVE_UNISTD_H
| # include <unistd.h>
| #endif
| #include <vfork.h>
configure:9247: result: no
configure:9251: checking vfork.h presence
configure:9262: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -E  conftest.c
"configure", line 9349.10: 1506-296 (S) #include file <vfork.h> not found.
configure:9268: $? = 1
configure: failed program was:
| #line 9253 "configure"
| /* confdefs.h.  */
| 
| #define PACKAGE_NAME "GNU Bison"
| #define PACKAGE_TARNAME "bison"
| #define PACKAGE_VERSION "1.875"
| #define PACKAGE_STRING "GNU Bison 1.875"
| #define PACKAGE_BUGREPORT "bug-bison@gnu.org"
| #define PACKAGE "bison"
| #define VERSION "1.875"
| #define _GNU_SOURCE 1
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_UNISTD_H 1
| #define YYTEXT_POINTER 1
| #define M4 "/afs/eda/tools/gnu/bin/m4"
| #define STDC_HEADERS 1
| #define HAVE_CTYPE_H 1
| #define HAVE_LOCALE_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_UNISTD_H 1
| #define inline __inline
| #define HAVE_UINTPTR_T 1
| #define HAVE_ALLOCA_H 1
| #define HAVE_ALLOCA 1
| #define HAVE_SETLOCALE 1
| #define HAVE_DECL_FREE 1
| #define HAVE_DECL_GETENV 1
| #define HAVE_DECL_GETOPT 1
| #define HAVE_DECL_STPCPY 1
| #define HAVE_DECL_STRCHR 1
| #define HAVE_DECL_STRSPN 1
| #define HAVE_DECL_STRNLEN 1
| #define HAVE_DECL_MALLOC 1
| #define HAVE_DECL_MEMCHR 1
| #define HAVE_DECL_MEMRCHR 0
| #define HAVE_MEMCHR 1
| #define HAVE_STRCHR 1
| #define HAVE_STPCPY 1
| #define HAVE_STRRCHR 1
| #define HAVE_STRSPN 1
| #define HAVE_STRTOL 1
| #define HAVE_STRTOUL 1
| #define HAVE_STDLIB_H 1
| #define HAVE_MALLOC 0
| #define malloc rpl_malloc
| #define HAVE_STDLIB_H 1
| #define HAVE_REALLOC 0
| #define realloc rpl_realloc
| #define HAVE_WCHAR_H 1
| #define HAVE_WCTYPE_H 1
| #define HAVE_ISASCII 1
| #define HAVE_ISWCNTRL 1
| #define HAVE_ISWPRINT 1
| #define HAVE_MBSINIT 1
| #define HAVE_WCWIDTH 1
| #define HAVE_MBRTOWC 1
| #define HAVE_DECL_WCWIDTH 1
| #define HAVE_MBSTATE_T 1
| #define HAVE_ISASCII 1
| #define HAVE_ISWPRINT 1
| #define HAVE_MBRTOWC 1
| #define HAVE_LIMITS_H 1
| #define HAVE_STDDEF_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_WCHAR_H 1
| #define HAVE_WCTYPE_H 1
| #define STDC_HEADERS 1
| #define HAVE_C_BACKSLASH_A 1
| #define HAVE_MBSTATE_T 1
| #define PROTOTYPES 1
| #define STDC_HEADERS 1
| #define HAVE_STRING_H 1
| #define HAVE_STRCASECMP 1
| #define HAVE_STRNCASECMP 1
| #define HAVE_STRERROR 1
| #define HAVE_VPRINTF 1
| #define HAVE_DECL_STRERROR 1
| #define HAVE_DECL_STRERROR_R 0
| #define HAVE_STRERROR_R 1
| #define STDC_HEADERS 1
| #define HAVE_FCNTL_H 1
| #define HAVE_SYS_WAIT_H 1
| #define HAVE_SYS_WAIT_H 1
| #define HAVE_DUP2 1
| #define HAVE_WAITPID 1
| #define HAVE_UNISTD_H 1
| /* end confdefs.h.  */
| #include <vfork.h>
configure:9287: result: no
configure:9323: checking for vfork.h
configure:9330: result: no
configure:9348: checking for fork
configure:9398: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g   conftest.c  >&5
configure:9401: $? = 0
configure:9404: test -s conftest
configure:9407: $? = 0
configure:9418: result: yes
configure:9348: checking for vfork
configure:9398: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g   conftest.c  >&5
configure:9401: $? = 0
configure:9404: test -s conftest
configure:9407: $? = 0
configure:9418: result: yes
configure:9429: checking for working fork
configure:9452: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g   conftest.c  >&5
configure:9455: $? = 0
configure:9457: ./conftest
configure:9460: $? = 0
configure:9474: result: yes
configure:9495: checking for working vfork
configure:9629: result: yes
configure:9677: checking sys/resource.h usability
configure:9690: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
configure:9693: $? = 0
configure:9696: test -s conftest.o
configure:9699: $? = 0
configure:9709: result: yes
configure:9713: checking sys/resource.h presence
configure:9724: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -E  conftest.c
configure:9730: $? = 0
configure:9749: result: yes
configure:9785: checking for sys/resource.h
configure:9792: result: yes
configure:9677: checking sys/time.h usability
configure:9690: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
configure:9693: $? = 0
configure:9696: test -s conftest.o
configure:9699: $? = 0
configure:9709: result: yes
configure:9713: checking sys/time.h presence
configure:9724: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -E  conftest.c
configure:9730: $? = 0
configure:9749: result: yes
configure:9785: checking for sys/time.h
configure:9792: result: yes
configure:9677: checking sys/times.h usability
configure:9690: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
configure:9693: $? = 0
configure:9696: test -s conftest.o
configure:9699: $? = 0
configure:9709: result: yes
configure:9713: checking sys/times.h presence
configure:9724: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -E  conftest.c
configure:9730: $? = 0
configure:9749: result: yes
configure:9785: checking for sys/times.h
configure:9792: result: yes
configure:9810: checking for times
configure:9860: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g   conftest.c  >&5
configure:9863: $? = 0
configure:9866: test -s conftest
configure:9869: $? = 0
configure:9880: result: yes
configure:9891: checking whether getrusage is declared
configure:9927: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
configure:9930: $? = 0
configure:9933: test -s conftest.o
configure:9936: $? = 0
configure:9947: result: yes
configure:9963: checking whether times is declared
configure:9999: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
configure:10002: $? = 0
configure:10005: test -s conftest.o
configure:10008: $? = 0
configure:10019: result: yes
configure:10035: checking whether clock is declared
configure:10071: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
"configure", line 10195.22: 1506-045 (S) Undeclared identifier clock.
configure:10074: $? = 1
configure: failed program was:
| #line 10040 "configure"
| /* confdefs.h.  */
| 
| #define PACKAGE_NAME "GNU Bison"
| #define PACKAGE_TARNAME "bison"
| #define PACKAGE_VERSION "1.875"
| #define PACKAGE_STRING "GNU Bison 1.875"
| #define PACKAGE_BUGREPORT "bug-bison@gnu.org"
| #define PACKAGE "bison"
| #define VERSION "1.875"
| #define _GNU_SOURCE 1
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_UNISTD_H 1
| #define YYTEXT_POINTER 1
| #define M4 "/afs/eda/tools/gnu/bin/m4"
| #define STDC_HEADERS 1
| #define HAVE_CTYPE_H 1
| #define HAVE_LOCALE_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_UNISTD_H 1
| #define inline __inline
| #define HAVE_UINTPTR_T 1
| #define HAVE_ALLOCA_H 1
| #define HAVE_ALLOCA 1
| #define HAVE_SETLOCALE 1
| #define HAVE_DECL_FREE 1
| #define HAVE_DECL_GETENV 1
| #define HAVE_DECL_GETOPT 1
| #define HAVE_DECL_STPCPY 1
| #define HAVE_DECL_STRCHR 1
| #define HAVE_DECL_STRSPN 1
| #define HAVE_DECL_STRNLEN 1
| #define HAVE_DECL_MALLOC 1
| #define HAVE_DECL_MEMCHR 1
| #define HAVE_DECL_MEMRCHR 0
| #define HAVE_MEMCHR 1
| #define HAVE_STRCHR 1
| #define HAVE_STPCPY 1
| #define HAVE_STRRCHR 1
| #define HAVE_STRSPN 1
| #define HAVE_STRTOL 1
| #define HAVE_STRTOUL 1
| #define HAVE_STDLIB_H 1
| #define HAVE_MALLOC 0
| #define malloc rpl_malloc
| #define HAVE_STDLIB_H 1
| #define HAVE_REALLOC 0
| #define realloc rpl_realloc
| #define HAVE_WCHAR_H 1
| #define HAVE_WCTYPE_H 1
| #define HAVE_ISASCII 1
| #define HAVE_ISWCNTRL 1
| #define HAVE_ISWPRINT 1
| #define HAVE_MBSINIT 1
| #define HAVE_WCWIDTH 1
| #define HAVE_MBRTOWC 1
| #define HAVE_DECL_WCWIDTH 1
| #define HAVE_MBSTATE_T 1
| #define HAVE_ISASCII 1
| #define HAVE_ISWPRINT 1
| #define HAVE_MBRTOWC 1
| #define HAVE_LIMITS_H 1
| #define HAVE_STDDEF_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_WCHAR_H 1
| #define HAVE_WCTYPE_H 1
| #define STDC_HEADERS 1
| #define HAVE_C_BACKSLASH_A 1
| #define HAVE_MBSTATE_T 1
| #define PROTOTYPES 1
| #define STDC_HEADERS 1
| #define HAVE_STRING_H 1
| #define HAVE_STRCASECMP 1
| #define HAVE_STRNCASECMP 1
| #define HAVE_STRERROR 1
| #define HAVE_VPRINTF 1
| #define HAVE_DECL_STRERROR 1
| #define HAVE_DECL_STRERROR_R 0
| #define HAVE_STRERROR_R 1
| #define STDC_HEADERS 1
| #define HAVE_FCNTL_H 1
| #define HAVE_SYS_WAIT_H 1
| #define HAVE_SYS_WAIT_H 1
| #define HAVE_DUP2 1
| #define HAVE_WAITPID 1
| #define HAVE_UNISTD_H 1
| #define HAVE_FORK 1
| #define HAVE_VFORK 1
| #define HAVE_WORKING_VFORK 1
| #define HAVE_WORKING_FORK 1
| #define HAVE_SYS_RESOURCE_H 1
| #define HAVE_SYS_TIME_H 1
| #define HAVE_SYS_TIMES_H 1
| #define HAVE_TIMES 1
| #define HAVE_DECL_GETRUSAGE 1
| #define HAVE_DECL_TIMES 1
| /* end confdefs.h.  */
| #include <stdio.h>
| #if HAVE_SYS_TYPES_H
| # include <sys/types.h>
| #endif
| #if HAVE_SYS_STAT_H
| # include <sys/stat.h>
| #endif
| #if STDC_HEADERS
| # include <stdlib.h>
| # include <stddef.h>
| #else
| # if HAVE_STDLIB_H
| #  include <stdlib.h>
| # endif
| #endif
| #if HAVE_STRING_H
| # if !STDC_HEADERS && HAVE_MEMORY_H
| #  include <memory.h>
| # endif
| # include <string.h>
| #endif
| #if HAVE_STRINGS_H
| # include <strings.h>
| #endif
| #if HAVE_INTTYPES_H
| # include <inttypes.h>
| #else
| # if HAVE_STDINT_H
| #  include <stdint.h>
| # endif
| #endif
| #if HAVE_UNISTD_H
| # include <unistd.h>
| #endif
| #if HAVE_SYS_TIME_H
| # include <sys/time.h>
| #endif
| #if HAVE_SYS_TIMES_H
| # include <sys/times.h>
| #endif
| #if HAVE_SYS_RESOURCE_H
| # include <sys/resource.h>
| #endif
| 
| 
| int
| main ()
| {
| #ifndef clock
|   char *p = (char *) clock;
| #endif
| 
|   ;
|   return 0;
| }
configure:10091: result: no
configure:10107: checking whether sysconf is declared
configure:10143: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
configure:10146: $? = 0
configure:10149: test -s conftest.o
configure:10152: $? = 0
configure:10163: result: yes
configure:10182: checking for clock_t
configure:10218: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
configure:10221: $? = 0
configure:10224: test -s conftest.o
configure:10227: $? = 0
configure:10238: result: yes
configure:10248: checking for struct tms
configure:10284: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -c -g  conftest.c >&5
configure:10287: $? = 0
configure:10290: test -s conftest.o
configure:10293: $? = 0
configure:10304: result: yes
configure:10333: checking for msgfmt
configure:10364: result: no
configure:10370: checking for gmsgfmt
configure:10401: result: :
configure:10411: checking for xgettext
configure:10442: result: no
configure:10450: checking for msgmerge
configure:10480: result: no
configure:10534: checking build system type
configure:10552: result: powerpc-ibm-aix5.1.0.0
configure:10560: checking host system type
configure:10574: result: powerpc-ibm-aix5.1.0.0
configure:10626: checking for non-GNU ld
configure:10656: result: /usr/bin/ld
configure:10665: checking if the linker (/usr/bin/ld) is GNU ld
configure:10677: result: no
configure:10683: checking for shared library run path origin
configure:10696: result: done
configure:11113: checking whether NLS is requested
configure:11122: result: yes
configure:11139: checking for GNU gettext in libc
configure:11164: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g   conftest.c  >&5
"configure", line 11254.10: 1506-296 (S) #include file <libintl.h> not found.
configure:11167: $? = 1
configure: failed program was:
| #line 11144 "configure"
| /* confdefs.h.  */
| 
| #define PACKAGE_NAME "GNU Bison"
| #define PACKAGE_TARNAME "bison"
| #define PACKAGE_VERSION "1.875"
| #define PACKAGE_STRING "GNU Bison 1.875"
| #define PACKAGE_BUGREPORT "bug-bison@gnu.org"
| #define PACKAGE "bison"
| #define VERSION "1.875"
| #define _GNU_SOURCE 1
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_UNISTD_H 1
| #define YYTEXT_POINTER 1
| #define M4 "/afs/eda/tools/gnu/bin/m4"
| #define STDC_HEADERS 1
| #define HAVE_CTYPE_H 1
| #define HAVE_LOCALE_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_UNISTD_H 1
| #define inline __inline
| #define HAVE_UINTPTR_T 1
| #define HAVE_ALLOCA_H 1
| #define HAVE_ALLOCA 1
| #define HAVE_SETLOCALE 1
| #define HAVE_DECL_FREE 1
| #define HAVE_DECL_GETENV 1
| #define HAVE_DECL_GETOPT 1
| #define HAVE_DECL_STPCPY 1
| #define HAVE_DECL_STRCHR 1
| #define HAVE_DECL_STRSPN 1
| #define HAVE_DECL_STRNLEN 1
| #define HAVE_DECL_MALLOC 1
| #define HAVE_DECL_MEMCHR 1
| #define HAVE_DECL_MEMRCHR 0
| #define HAVE_MEMCHR 1
| #define HAVE_STRCHR 1
| #define HAVE_STPCPY 1
| #define HAVE_STRRCHR 1
| #define HAVE_STRSPN 1
| #define HAVE_STRTOL 1
| #define HAVE_STRTOUL 1
| #define HAVE_STDLIB_H 1
| #define HAVE_MALLOC 0
| #define malloc rpl_malloc
| #define HAVE_STDLIB_H 1
| #define HAVE_REALLOC 0
| #define realloc rpl_realloc
| #define HAVE_WCHAR_H 1
| #define HAVE_WCTYPE_H 1
| #define HAVE_ISASCII 1
| #define HAVE_ISWCNTRL 1
| #define HAVE_ISWPRINT 1
| #define HAVE_MBSINIT 1
| #define HAVE_WCWIDTH 1
| #define HAVE_MBRTOWC 1
| #define HAVE_DECL_WCWIDTH 1
| #define HAVE_MBSTATE_T 1
| #define HAVE_ISASCII 1
| #define HAVE_ISWPRINT 1
| #define HAVE_MBRTOWC 1
| #define HAVE_LIMITS_H 1
| #define HAVE_STDDEF_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_WCHAR_H 1
| #define HAVE_WCTYPE_H 1
| #define STDC_HEADERS 1
| #define HAVE_C_BACKSLASH_A 1
| #define HAVE_MBSTATE_T 1
| #define PROTOTYPES 1
| #define STDC_HEADERS 1
| #define HAVE_STRING_H 1
| #define HAVE_STRCASECMP 1
| #define HAVE_STRNCASECMP 1
| #define HAVE_STRERROR 1
| #define HAVE_VPRINTF 1
| #define HAVE_DECL_STRERROR 1
| #define HAVE_DECL_STRERROR_R 0
| #define HAVE_STRERROR_R 1
| #define STDC_HEADERS 1
| #define HAVE_FCNTL_H 1
| #define HAVE_SYS_WAIT_H 1
| #define HAVE_SYS_WAIT_H 1
| #define HAVE_DUP2 1
| #define HAVE_WAITPID 1
| #define HAVE_UNISTD_H 1
| #define HAVE_FORK 1
| #define HAVE_VFORK 1
| #define HAVE_WORKING_VFORK 1
| #define HAVE_WORKING_FORK 1
| #define HAVE_SYS_RESOURCE_H 1
| #define HAVE_SYS_TIME_H 1
| #define HAVE_SYS_TIMES_H 1
| #define HAVE_TIMES 1
| #define HAVE_DECL_GETRUSAGE 1
| #define HAVE_DECL_TIMES 1
| #define HAVE_DECL_CLOCK 0
| #define HAVE_DECL_SYSCONF 1
| #define HAVE_CLOCK_T 1
| #define HAVE_STRUCT_TMS 1
| /* end confdefs.h.  */
| #include <libintl.h>
| extern int _nl_msg_cat_cntr;
| extern int *_nl_domain_bindings;
| int
| main ()
| {
| bindtextdomain ("", "");
| return (int) gettext ("") + (int) ngettext ("", "", 0) + _nl_msg_cat_cntr + *_nl_domain_bindings
|   ;
|   return 0;
| }
configure:11184: result: no
configure:11218: checking for iconv
configure:11246: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g   conftest.c  >&5
ld: 0711-317 ERROR: Undefined symbol: .iconv_open
ld: 0711-317 ERROR: Undefined symbol: .iconv
ld: 0711-317 ERROR: Undefined symbol: .iconv_close
ld: 0711-345 Use the -bloadmap or -bnoquiet option to obtain more information.
configure:11249: $? = 8
configure: failed program was:
| #line 11226 "configure"
| /* confdefs.h.  */
| 
| #define PACKAGE_NAME "GNU Bison"
| #define PACKAGE_TARNAME "bison"
| #define PACKAGE_VERSION "1.875"
| #define PACKAGE_STRING "GNU Bison 1.875"
| #define PACKAGE_BUGREPORT "bug-bison@gnu.org"
| #define PACKAGE "bison"
| #define VERSION "1.875"
| #define _GNU_SOURCE 1
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_UNISTD_H 1
| #define YYTEXT_POINTER 1
| #define M4 "/afs/eda/tools/gnu/bin/m4"
| #define STDC_HEADERS 1
| #define HAVE_CTYPE_H 1
| #define HAVE_LOCALE_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_UNISTD_H 1
| #define inline __inline
| #define HAVE_UINTPTR_T 1
| #define HAVE_ALLOCA_H 1
| #define HAVE_ALLOCA 1
| #define HAVE_SETLOCALE 1
| #define HAVE_DECL_FREE 1
| #define HAVE_DECL_GETENV 1
| #define HAVE_DECL_GETOPT 1
| #define HAVE_DECL_STPCPY 1
| #define HAVE_DECL_STRCHR 1
| #define HAVE_DECL_STRSPN 1
| #define HAVE_DECL_STRNLEN 1
| #define HAVE_DECL_MALLOC 1
| #define HAVE_DECL_MEMCHR 1
| #define HAVE_DECL_MEMRCHR 0
| #define HAVE_MEMCHR 1
| #define HAVE_STRCHR 1
| #define HAVE_STPCPY 1
| #define HAVE_STRRCHR 1
| #define HAVE_STRSPN 1
| #define HAVE_STRTOL 1
| #define HAVE_STRTOUL 1
| #define HAVE_STDLIB_H 1
| #define HAVE_MALLOC 0
| #define malloc rpl_malloc
| #define HAVE_STDLIB_H 1
| #define HAVE_REALLOC 0
| #define realloc rpl_realloc
| #define HAVE_WCHAR_H 1
| #define HAVE_WCTYPE_H 1
| #define HAVE_ISASCII 1
| #define HAVE_ISWCNTRL 1
| #define HAVE_ISWPRINT 1
| #define HAVE_MBSINIT 1
| #define HAVE_WCWIDTH 1
| #define HAVE_MBRTOWC 1
| #define HAVE_DECL_WCWIDTH 1
| #define HAVE_MBSTATE_T 1
| #define HAVE_ISASCII 1
| #define HAVE_ISWPRINT 1
| #define HAVE_MBRTOWC 1
| #define HAVE_LIMITS_H 1
| #define HAVE_STDDEF_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_WCHAR_H 1
| #define HAVE_WCTYPE_H 1
| #define STDC_HEADERS 1
| #define HAVE_C_BACKSLASH_A 1
| #define HAVE_MBSTATE_T 1
| #define PROTOTYPES 1
| #define STDC_HEADERS 1
| #define HAVE_STRING_H 1
| #define HAVE_STRCASECMP 1
| #define HAVE_STRNCASECMP 1
| #define HAVE_STRERROR 1
| #define HAVE_VPRINTF 1
| #define HAVE_DECL_STRERROR 1
| #define HAVE_DECL_STRERROR_R 0
| #define HAVE_STRERROR_R 1
| #define STDC_HEADERS 1
| #define HAVE_FCNTL_H 1
| #define HAVE_SYS_WAIT_H 1
| #define HAVE_SYS_WAIT_H 1
| #define HAVE_DUP2 1
| #define HAVE_WAITPID 1
| #define HAVE_UNISTD_H 1
| #define HAVE_FORK 1
| #define HAVE_VFORK 1
| #define HAVE_WORKING_VFORK 1
| #define HAVE_WORKING_FORK 1
| #define HAVE_SYS_RESOURCE_H 1
| #define HAVE_SYS_TIME_H 1
| #define HAVE_SYS_TIMES_H 1
| #define HAVE_TIMES 1
| #define HAVE_DECL_GETRUSAGE 1
| #define HAVE_DECL_TIMES 1
| #define HAVE_DECL_CLOCK 0
| #define HAVE_DECL_SYSCONF 1
| #define HAVE_CLOCK_T 1
| #define HAVE_STRUCT_TMS 1
| /* end confdefs.h.  */
| #include <stdlib.h>
| #include <iconv.h>
| int
| main ()
| {
| iconv_t cd = iconv_open("","");
|        iconv(cd,NULL,NULL,NULL,NULL);
|        iconv_close(cd);
|   ;
|   return 0;
| }
configure:11287: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g   conftest.c  -liconv >&5
configure:11290: $? = 0
configure:11293: test -s conftest
configure:11296: $? = 0
configure:11310: result: yes
configure:11320: checking how to link with libiconv
configure:11322: result: -liconv
configure:11711: checking for GNU gettext in libintl
configure:11744: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g    conftest.c  -lintl >&5
"configure", line 11831.10: 1506-296 (S) #include file <libintl.h> not found.
configure:11747: $? = 1
configure: failed program was:
| #line 11720 "configure"
| /* confdefs.h.  */
| 
| #define PACKAGE_NAME "GNU Bison"
| #define PACKAGE_TARNAME "bison"
| #define PACKAGE_VERSION "1.875"
| #define PACKAGE_STRING "GNU Bison 1.875"
| #define PACKAGE_BUGREPORT "bug-bison@gnu.org"
| #define PACKAGE "bison"
| #define VERSION "1.875"
| #define _GNU_SOURCE 1
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_UNISTD_H 1
| #define YYTEXT_POINTER 1
| #define M4 "/afs/eda/tools/gnu/bin/m4"
| #define STDC_HEADERS 1
| #define HAVE_CTYPE_H 1
| #define HAVE_LOCALE_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_UNISTD_H 1
| #define inline __inline
| #define HAVE_UINTPTR_T 1
| #define HAVE_ALLOCA_H 1
| #define HAVE_ALLOCA 1
| #define HAVE_SETLOCALE 1
| #define HAVE_DECL_FREE 1
| #define HAVE_DECL_GETENV 1
| #define HAVE_DECL_GETOPT 1
| #define HAVE_DECL_STPCPY 1
| #define HAVE_DECL_STRCHR 1
| #define HAVE_DECL_STRSPN 1
| #define HAVE_DECL_STRNLEN 1
| #define HAVE_DECL_MALLOC 1
| #define HAVE_DECL_MEMCHR 1
| #define HAVE_DECL_MEMRCHR 0
| #define HAVE_MEMCHR 1
| #define HAVE_STRCHR 1
| #define HAVE_STPCPY 1
| #define HAVE_STRRCHR 1
| #define HAVE_STRSPN 1
| #define HAVE_STRTOL 1
| #define HAVE_STRTOUL 1
| #define HAVE_STDLIB_H 1
| #define HAVE_MALLOC 0
| #define malloc rpl_malloc
| #define HAVE_STDLIB_H 1
| #define HAVE_REALLOC 0
| #define realloc rpl_realloc
| #define HAVE_WCHAR_H 1
| #define HAVE_WCTYPE_H 1
| #define HAVE_ISASCII 1
| #define HAVE_ISWCNTRL 1
| #define HAVE_ISWPRINT 1
| #define HAVE_MBSINIT 1
| #define HAVE_WCWIDTH 1
| #define HAVE_MBRTOWC 1
| #define HAVE_DECL_WCWIDTH 1
| #define HAVE_MBSTATE_T 1
| #define HAVE_ISASCII 1
| #define HAVE_ISWPRINT 1
| #define HAVE_MBRTOWC 1
| #define HAVE_LIMITS_H 1
| #define HAVE_STDDEF_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_WCHAR_H 1
| #define HAVE_WCTYPE_H 1
| #define STDC_HEADERS 1
| #define HAVE_C_BACKSLASH_A 1
| #define HAVE_MBSTATE_T 1
| #define PROTOTYPES 1
| #define STDC_HEADERS 1
| #define HAVE_STRING_H 1
| #define HAVE_STRCASECMP 1
| #define HAVE_STRNCASECMP 1
| #define HAVE_STRERROR 1
| #define HAVE_VPRINTF 1
| #define HAVE_DECL_STRERROR 1
| #define HAVE_DECL_STRERROR_R 0
| #define HAVE_STRERROR_R 1
| #define STDC_HEADERS 1
| #define HAVE_FCNTL_H 1
| #define HAVE_SYS_WAIT_H 1
| #define HAVE_SYS_WAIT_H 1
| #define HAVE_DUP2 1
| #define HAVE_WAITPID 1
| #define HAVE_UNISTD_H 1
| #define HAVE_FORK 1
| #define HAVE_VFORK 1
| #define HAVE_WORKING_VFORK 1
| #define HAVE_WORKING_FORK 1
| #define HAVE_SYS_RESOURCE_H 1
| #define HAVE_SYS_TIME_H 1
| #define HAVE_SYS_TIMES_H 1
| #define HAVE_TIMES 1
| #define HAVE_DECL_GETRUSAGE 1
| #define HAVE_DECL_TIMES 1
| #define HAVE_DECL_CLOCK 0
| #define HAVE_DECL_SYSCONF 1
| #define HAVE_CLOCK_T 1
| #define HAVE_STRUCT_TMS 1
| #define HAVE_ICONV 1
| /* end confdefs.h.  */
| #include <libintl.h>
| extern int _nl_msg_cat_cntr;
| extern
| #ifdef __cplusplus
| "C"
| #endif
| const char *_nl_expand_alias ();
| int
| main ()
| {
| bindtextdomain ("", "");
| return (int) gettext ("") + (int) ngettext ("", "", 0) + _nl_msg_cat_cntr + *_nl_expand_alias (0)
|   ;
|   return 0;
| }
configure:11789: /afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -o conftest -g    conftest.c  -lintl -liconv >&5
"configure", line 11876.10: 1506-296 (S) #include file <libintl.h> not found.
configure:11792: $? = 1
configure: failed program was:
| #line 11765 "configure"
| /* confdefs.h.  */
| 
| #define PACKAGE_NAME "GNU Bison"
| #define PACKAGE_TARNAME "bison"
| #define PACKAGE_VERSION "1.875"
| #define PACKAGE_STRING "GNU Bison 1.875"
| #define PACKAGE_BUGREPORT "bug-bison@gnu.org"
| #define PACKAGE "bison"
| #define VERSION "1.875"
| #define _GNU_SOURCE 1
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_UNISTD_H 1
| #define YYTEXT_POINTER 1
| #define M4 "/afs/eda/tools/gnu/bin/m4"
| #define STDC_HEADERS 1
| #define HAVE_CTYPE_H 1
| #define HAVE_LOCALE_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_UNISTD_H 1
| #define inline __inline
| #define HAVE_UINTPTR_T 1
| #define HAVE_ALLOCA_H 1
| #define HAVE_ALLOCA 1
| #define HAVE_SETLOCALE 1
| #define HAVE_DECL_FREE 1
| #define HAVE_DECL_GETENV 1
| #define HAVE_DECL_GETOPT 1
| #define HAVE_DECL_STPCPY 1
| #define HAVE_DECL_STRCHR 1
| #define HAVE_DECL_STRSPN 1
| #define HAVE_DECL_STRNLEN 1
| #define HAVE_DECL_MALLOC 1
| #define HAVE_DECL_MEMCHR 1
| #define HAVE_DECL_MEMRCHR 0
| #define HAVE_MEMCHR 1
| #define HAVE_STRCHR 1
| #define HAVE_STPCPY 1
| #define HAVE_STRRCHR 1
| #define HAVE_STRSPN 1
| #define HAVE_STRTOL 1
| #define HAVE_STRTOUL 1
| #define HAVE_STDLIB_H 1
| #define HAVE_MALLOC 0
| #define malloc rpl_malloc
| #define HAVE_STDLIB_H 1
| #define HAVE_REALLOC 0
| #define realloc rpl_realloc
| #define HAVE_WCHAR_H 1
| #define HAVE_WCTYPE_H 1
| #define HAVE_ISASCII 1
| #define HAVE_ISWCNTRL 1
| #define HAVE_ISWPRINT 1
| #define HAVE_MBSINIT 1
| #define HAVE_WCWIDTH 1
| #define HAVE_MBRTOWC 1
| #define HAVE_DECL_WCWIDTH 1
| #define HAVE_MBSTATE_T 1
| #define HAVE_ISASCII 1
| #define HAVE_ISWPRINT 1
| #define HAVE_MBRTOWC 1
| #define HAVE_LIMITS_H 1
| #define HAVE_STDDEF_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_WCHAR_H 1
| #define HAVE_WCTYPE_H 1
| #define STDC_HEADERS 1
| #define HAVE_C_BACKSLASH_A 1
| #define HAVE_MBSTATE_T 1
| #define PROTOTYPES 1
| #define STDC_HEADERS 1
| #define HAVE_STRING_H 1
| #define HAVE_STRCASECMP 1
| #define HAVE_STRNCASECMP 1
| #define HAVE_STRERROR 1
| #define HAVE_VPRINTF 1
| #define HAVE_DECL_STRERROR 1
| #define HAVE_DECL_STRERROR_R 0
| #define HAVE_STRERROR_R 1
| #define STDC_HEADERS 1
| #define HAVE_FCNTL_H 1
| #define HAVE_SYS_WAIT_H 1
| #define HAVE_SYS_WAIT_H 1
| #define HAVE_DUP2 1
| #define HAVE_WAITPID 1
| #define HAVE_UNISTD_H 1
| #define HAVE_FORK 1
| #define HAVE_VFORK 1
| #define HAVE_WORKING_VFORK 1
| #define HAVE_WORKING_FORK 1
| #define HAVE_SYS_RESOURCE_H 1
| #define HAVE_SYS_TIME_H 1
| #define HAVE_SYS_TIMES_H 1
| #define HAVE_TIMES 1
| #define HAVE_DECL_GETRUSAGE 1
| #define HAVE_DECL_TIMES 1
| #define HAVE_DECL_CLOCK 0
| #define HAVE_DECL_SYSCONF 1
| #define HAVE_CLOCK_T 1
| #define HAVE_STRUCT_TMS 1
| #define HAVE_ICONV 1
| /* end confdefs.h.  */
| #include <libintl.h>
| extern int _nl_msg_cat_cntr;
| extern
| #ifdef __cplusplus
| "C"
| #endif
| const char *_nl_expand_alias ();
| int
| main ()
| {
| bindtextdomain ("", "");
| return (int) gettext ("") + (int) ngettext ("", "", 0) + _nl_msg_cat_cntr + *_nl_expand_alias (0)
|   ;
|   return 0;
| }
configure:11814: result: no
configure:11913: checking for valgrind
configure:11942: result: no
configure:11953: checking for g++
configure:11969: found /afs/eda/tools/gnu/bin/g++
configure:11979: result: g++
configure:12108: creating ./config.status

## ---------------------- ##
## Running config.status. ##
## ---------------------- ##

This file was extended by GNU Bison config.status 1.875, which was
generated by GNU Autoconf 2.57.  Invocation command line was

  CONFIG_FILES    = 
  CONFIG_HEADERS  = 
  CONFIG_LINKS    = 
  CONFIG_COMMANDS = 
  $ ./config.status 

on comserv706.fishkill.ibm.com

config.status:707: creating tests/Makefile
config.status:707: creating tests/atlocal
config.status:707: creating tests/bison
config.status:707: creating Makefile
config.status:707: creating config/Makefile
config.status:707: creating po/Makefile.in
config.status:707: creating data/Makefile
config.status:707: creating lib/Makefile
config.status:707: creating src/Makefile
config.status:707: creating doc/Makefile
config.status:707: creating m4/Makefile
config.status:815: creating config.h
config.status:1249: executing depfiles commands
config.status:1249: executing default-1 commands
config.status:1249: executing tests/atconfig commands

## ---------------- ##
## Cache variables. ##
## ---------------- ##

ac_cv_build=powerpc-ibm-aix5.1.0.0
ac_cv_build_alias=powerpc-ibm-aix5.1.0.0
ac_cv_c_backslash_a=yes
ac_cv_c_compiler_gnu=no
ac_cv_c_inline=__inline
ac_cv_env_CC_set=set
ac_cv_env_CC_value=/afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc
ac_cv_env_CFLAGS_set=''
ac_cv_env_CFLAGS_value=''
ac_cv_env_CPPFLAGS_set=''
ac_cv_env_CPPFLAGS_value=''
ac_cv_env_CPP_set=''
ac_cv_env_CPP_value=''
ac_cv_env_LDFLAGS_set=''
ac_cv_env_LDFLAGS_value=''
ac_cv_env_build_alias_set=''
ac_cv_env_build_alias_value=''
ac_cv_env_host_alias_set=''
ac_cv_env_host_alias_value=''
ac_cv_env_target_alias_set=''
ac_cv_env_target_alias_value=''
ac_cv_exeext=''
ac_cv_func_alloca_works=yes
ac_cv_func_doprnt=no
ac_cv_func_dup2=yes
ac_cv_func_fork=yes
ac_cv_func_fork_works=yes
ac_cv_func_isascii=yes
ac_cv_func_iswcntrl=yes
ac_cv_func_iswprint=yes
ac_cv_func_malloc_0_nonnull=no
ac_cv_func_mbsinit=yes
ac_cv_func_memchr=yes
ac_cv_func_memcmp_working=yes
ac_cv_func_memrchr=no
ac_cv_func_obstack=no
ac_cv_func_realloc_0_nonnull=no
ac_cv_func_setlocale=yes
ac_cv_func_stpcpy=yes
ac_cv_func_strcasecmp=yes
ac_cv_func_strchr=yes
ac_cv_func_strerror=yes
ac_cv_func_strerror_r=yes
ac_cv_func_strerror_r_char_p=no
ac_cv_func_strncasecmp=yes
ac_cv_func_strnlen_working=no
ac_cv_func_strrchr=yes
ac_cv_func_strspn=yes
ac_cv_func_strtol=yes
ac_cv_func_strtoul=yes
ac_cv_func_times=yes
ac_cv_func_vfork=yes
ac_cv_func_vfork_works=yes
ac_cv_func_vprintf=yes
ac_cv_func_waitpid=yes
ac_cv_func_wcwidth=yes
ac_cv_have_decl_clock=no
ac_cv_have_decl_free=yes
ac_cv_have_decl_getenv=yes
ac_cv_have_decl_getopt=yes
ac_cv_have_decl_getrusage=yes
ac_cv_have_decl_malloc=yes
ac_cv_have_decl_memchr=yes
ac_cv_have_decl_memrchr=no
ac_cv_have_decl_stpcpy=yes
ac_cv_have_decl_strchr=yes
ac_cv_have_decl_strerror=yes
ac_cv_have_decl_strerror_r=no
ac_cv_have_decl_strnlen=yes
ac_cv_have_decl_strspn=yes
ac_cv_have_decl_sysconf=yes
ac_cv_have_decl_times=yes
ac_cv_have_decl_wcwidth=yes
ac_cv_header_ctype_h=yes
ac_cv_header_fcntl_h=yes
ac_cv_header_inttypes_h=yes
ac_cv_header_limits_h=yes
ac_cv_header_locale_h=yes
ac_cv_header_memory_h=yes
ac_cv_header_minix_config_h=no
ac_cv_header_stdbool_h=no
ac_cv_header_stdc=yes
ac_cv_header_stddef_h=yes
ac_cv_header_stdint_h=no
ac_cv_header_stdlib_h=yes
ac_cv_header_string_h=yes
ac_cv_header_strings_h=yes
ac_cv_header_sys_resource_h=yes
ac_cv_header_sys_stat_h=yes
ac_cv_header_sys_time_h=yes
ac_cv_header_sys_times_h=yes
ac_cv_header_sys_types_h=yes
ac_cv_header_sys_wait_h=yes
ac_cv_header_unistd_h=yes
ac_cv_header_vfork_h=no
ac_cv_header_wchar_h=yes
ac_cv_header_wctype_h=yes
ac_cv_host=powerpc-ibm-aix5.1.0.0
ac_cv_host_alias=powerpc-ibm-aix5.1.0.0
ac_cv_lib_cposix_strerror=no
ac_cv_lib_error_at_line=no
ac_cv_lib_fl_yywrap=no
ac_cv_lib_l_yywrap=yes
ac_cv_objext=o
ac_cv_path_GMSGFMT=:
ac_cv_path_M4=/afs/eda/tools/gnu/bin/m4
ac_cv_path_MSGFMT=:
ac_cv_path_MSGMERGE=:
ac_cv_path_XGETTEXT=:
ac_cv_prog_AWK=gawk
ac_cv_prog_CPP='/afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -E'
ac_cv_prog_GXX=g++
ac_cv_prog_LEX=flex
ac_cv_prog_YACC='bison -y'
ac_cv_prog_ac_ct_CC=/afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc
ac_cv_prog_ac_ct_RANLIB=ranlib
ac_cv_prog_cc_g=yes
ac_cv_prog_cc_stdc=''
ac_cv_prog_egrep='grep -E'
ac_cv_prog_gnu_m4=yes
ac_cv_prog_lex_root=lex.yy
ac_cv_prog_lex_yytext_pointer=yes
ac_cv_prog_make_make_set=yes
ac_cv_type_clock_t=yes
ac_cv_type_mbstate_t=yes
ac_cv_type_pid_t=yes
ac_cv_type_struct_tms=yes
ac_cv_type_uintptr_t=yes
ac_cv_working_alloca_h=yes
acl_cv_hardcode_direct=yes
acl_cv_hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib'
acl_cv_hardcode_libdir_separator=:
acl_cv_hardcode_minus_L=no
acl_cv_libext=a
acl_cv_path_LD=/usr/bin/ld
acl_cv_prog_gnu_ld=no
acl_cv_rpath=done
acl_cv_shlibext=so
acl_cv_sys_lib_dlsearch_path_spec='/lib /usr/lib'
acl_cv_sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
acl_cv_wl=-Wl,
am_cv_CC_dependencies_compiler_type=aix
am_cv_func_iconv=yes
am_cv_lib_iconv=yes
am_cv_prog_cc_stdc=''
gt_cv_func_gnugettext2_libc=no
gt_cv_func_gnugettext2_libintl=no
jm_cv_func_mbrtowc=yes

## ----------------- ##
## Output variables. ##
## ----------------- ##

ACLOCAL='${SHELL} /afs/eda/u/florian/bison-1.875/config/missing --run aclocal-1.7'
ALLOCA=''
AMDEPBACKSLASH='\'
AMDEP_FALSE='#'
AMDEP_TRUE=''
AMTAR='${SHELL} /afs/eda/u/florian/bison-1.875/config/missing --run tar'
ANSI2KNR=''
AUTOCONF='${SHELL} /afs/eda/u/florian/bison-1.875/config/missing --run autoconf'
AUTOHEADER='${SHELL} /afs/eda/u/florian/bison-1.875/config/missing --run autoheader'
AUTOM4TE='${SHELL} /afs/eda/u/florian/bison-1.875/config/missing --run autom4te'
AUTOMAKE='${SHELL} /afs/eda/u/florian/bison-1.875/config/missing --run automake-1.7'
AWK='gawk'
CC='/afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc'
CCDEPMODE='depmode=aix'
CFLAGS='-g'
CPP='/afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc -E'
CPPFLAGS=''
CYGPATH_W='echo'
DEFS='-DHAVE_CONFIG_H'
DEPDIR='.deps'
ECHO_C='ECHO_N=''
ECHO_T=''
EGREP='grep -E'
EXEEXT=''
GCC=''
GMSGFMT=':'
GXX='g++'
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='${SHELL} $(install_sh) -c -s'
INTLLIBS=''
LDFLAGS=''
LEX='flex'
LEXLIB='-ll'
LEX_OUTPUT_ROOT='lex.yy'
LIBICONV='-liconv'
LIBINTL=''
LIBOBJS=' obstack$U.o error$U.o strnlen$U.o memrchr$U.o malloc$U.o realloc$U.o argmatch$U.o'
LIBS=''
LTLIBICONV='-liconv'
LTLIBINTL=''
LTLIBOBJS=' obstack$U.lo error$U.lo strnlen$U.lo memrchr$U.lo malloc$U.lo realloc$U.lo argmatch$U.lo'
M4='/afs/eda/tools/gnu/bin/m4'
MAKEINFO='${SHELL} /afs/eda/u/florian/bison-1.875/config/missing --run makeinfo'
MKINSTALLDIRS='config/mkinstalldirs'
MSGFMT=':'
MSGMERGE=':'
O0CFLAGS='-g'
OBJEXT='o'
PACKAGE='bison'
PACKAGE_BUGREPORT='bug-bison@gnu.org'
PACKAGE_NAME='GNU Bison'
PACKAGE_STRING='GNU Bison 1.875'
PACKAGE_TARNAME='bison'
PACKAGE_VERSION='1.875'
PATH_SEPARATOR=':'
POSUB=''
RANLIB='ranlib'
SET_MAKE=''
SHELL='/afs/eda/tools/gnu/bin/bash'
STRIP=''
U=''
USE_NLS='no'
VALGRIND=''
VERSION='1.875'
WARNING_CFLAGS=''
WERROR_CFLAGS=''
XGETTEXT=':'
YACC='bison -y'
ac_ct_CC='/afs/eda/rs_aix51/prod/vac_6.0.0.5/bin/xlc'
ac_ct_RANLIB='ranlib'
ac_ct_STRIP=''
am__fastdepCC_FALSE=''
am__fastdepCC_TRUE='#'
am__include='include'
am__quote=''
bindir='${exec_prefix}/bin'
build='powerpc-ibm-aix5.1.0.0'
build_alias=''
build_cpu='powerpc'
build_os='aix5.1.0.0'
build_vendor='ibm'
datadir='${prefix}/share'
exec_prefix='${prefix}'
host='powerpc-ibm-aix5.1.0.0'
host_alias=''
host_cpu='powerpc'
host_os='aix5.1.0.0'
host_vendor='ibm'
includedir='${prefix}/include'
infodir='${prefix}/info'
install_sh='/afs/eda/u/florian/bison-1.875/config/install-sh'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localstatedir='${prefix}/var'
mandir='${prefix}/man'
oldincludedir='/usr/include'
prefix='/afs/eda/u/florian/tmp'
program_transform_name='s,x,x,'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target_alias=''

## ----------- ##
## confdefs.h. ##
## ----------- ##

#define HAVE_ALLOCA 1
#define HAVE_ALLOCA_H 1
#define HAVE_CLOCK_T 1
#define HAVE_CTYPE_H 1
#define HAVE_C_BACKSLASH_A 1
#define HAVE_DECL_CLOCK 0
#define HAVE_DECL_FREE 1
#define HAVE_DECL_GETENV 1
#define HAVE_DECL_GETOPT 1
#define HAVE_DECL_GETRUSAGE 1
#define HAVE_DECL_MALLOC 1
#define HAVE_DECL_MEMCHR 1
#define HAVE_DECL_MEMRCHR 0
#define HAVE_DECL_STPCPY 1
#define HAVE_DECL_STRCHR 1
#define HAVE_DECL_STRERROR 1
#define HAVE_DECL_STRERROR_R 0
#define HAVE_DECL_STRNLEN 1
#define HAVE_DECL_STRSPN 1
#define HAVE_DECL_SYSCONF 1
#define HAVE_DECL_TIMES 1
#define HAVE_DECL_WCWIDTH 1
#define HAVE_DUP2 1
#define HAVE_FCNTL_H 1
#define HAVE_FORK 1
#define HAVE_ICONV 1
#define HAVE_INTTYPES_H 1
#define HAVE_ISASCII 1
#define HAVE_ISASCII 1
#define HAVE_ISWCNTRL 1
#define HAVE_ISWPRINT 1
#define HAVE_ISWPRINT 1
#define HAVE_LIMITS_H 1
#define HAVE_LOCALE_H 1
#define HAVE_MALLOC 0
#define HAVE_MBRTOWC 1
#define HAVE_MBRTOWC 1
#define HAVE_MBSINIT 1
#define HAVE_MBSTATE_T 1
#define HAVE_MBSTATE_T 1
#define HAVE_MEMCHR 1
#define HAVE_MEMORY_H 1
#define HAVE_MEMORY_H 1
#define HAVE_REALLOC 0
#define HAVE_SETLOCALE 1
#define HAVE_STDDEF_H 1
#define HAVE_STDLIB_H 1
#define HAVE_STDLIB_H 1
#define HAVE_STDLIB_H 1
#define HAVE_STDLIB_H 1
#define HAVE_STDLIB_H 1
#define HAVE_STPCPY 1
#define HAVE_STRCASECMP 1
#define HAVE_STRCHR 1
#define HAVE_STRERROR 1
#define HAVE_STRERROR_R 1
#define HAVE_STRINGS_H 1
#define HAVE_STRING_H 1
#define HAVE_STRING_H 1
#define HAVE_STRING_H 1
#define HAVE_STRING_H 1
#define HAVE_STRNCASECMP 1
#define HAVE_STRRCHR 1
#define HAVE_STRSPN 1
#define HAVE_STRTOL 1
#define HAVE_STRTOUL 1
#define HAVE_STRUCT_TMS 1
#define HAVE_SYS_RESOURCE_H 1
#define HAVE_SYS_STAT_H 1
#define HAVE_SYS_TIMES_H 1
#define HAVE_SYS_TIME_H 1
#define HAVE_SYS_TYPES_H 1
#define HAVE_SYS_WAIT_H 1
#define HAVE_SYS_WAIT_H 1
#define HAVE_TIMES 1
#define HAVE_UINTPTR_T 1
#define HAVE_UNISTD_H 1
#define HAVE_UNISTD_H 1
#define HAVE_UNISTD_H 1
#define HAVE_VFORK 1
#define HAVE_VPRINTF 1
#define HAVE_WAITPID 1
#define HAVE_WCHAR_H 1
#define HAVE_WCHAR_H 1
#define HAVE_WCTYPE_H 1
#define HAVE_WCTYPE_H 1
#define HAVE_WCWIDTH 1
#define HAVE_WORKING_FORK 1
#define HAVE_WORKING_VFORK 1
#define M4 "/afs/eda/tools/gnu/bin/m4"
#define PACKAGE "bison"
#define PACKAGE_BUGREPORT "bug-bison@gnu.org"
#define PACKAGE_NAME "GNU Bison"
#define PACKAGE_STRING "GNU Bison 1.875"
#define PACKAGE_TARNAME "bison"
#define PACKAGE_VERSION "1.875"
#define PROTOTYPES 1
#define STDC_HEADERS 1
#define STDC_HEADERS 1
#define STDC_HEADERS 1
#define STDC_HEADERS 1
#define STDC_HEADERS 1
#define VERSION "1.875"
#define YYTEXT_POINTER 1
#define _GNU_SOURCE 1
#define inline __inline
#define malloc rpl_malloc
#define realloc rpl_realloc

configure: exit 0

--Boundary-00=_Mq+/Aa+GvtrbWvx--



From MAILER-DAEMON Thu Jul 22 18:16:00 2004
Received: from mailman by lists.gnu.org with archive (Exim 4.33)
	id 1Bnlr6-0004n9-8g
	for mharc-bug-bison@gnu.org; Thu, 22 Jul 2004 18:16:00 -0400
Received: from mailman by lists.gnu.org with tmda-scanned (Exim 4.33)
	id 1Bnlr5-0004mt-1S
	for bug-bison@gnu.org; Thu, 22 Jul 2004 18:15:59 -0400
Received: from exim by lists.gnu.org with spam-scanned (Exim 4.33)
	id 1Bnlr3-0004m4-3A
	for bug-bison@gnu.org; Thu, 22 Jul 2004 18:15:58 -0400
Received: from [199.232.76.173] (helo=monty-python.gnu.org)
	by lists.gnu.org with esmtp (Exim 4.33) id 1Bnlr2-0004m1-V3
	for bug-bison@gnu.org; Thu, 22 Jul 2004 18:15:57 -0400
Received: from [63.99.224.78] (helo=mailhub04.readyhosting.com)
	by monty-python.gnu.org with esmtp (Exim 4.34) id 1Bnlnq-00024F-BA
	for bug-bison@gnu.org; Thu, 22 Jul 2004 18:12:38 -0400
Received: from intimepublishing.com (mail015.readyhosting.com [63.99.209.78])
	by mailhub04.readyhosting.com (Postfix) with ESMTP id DFAB92AA870
	for <bug-bison@gnu.org>; Thu, 22 Jul 2004 17:14:48 -0500 (CDT)
Date: Thu, 22 Jul 2004 17:12:13 
Message-Id: <10407221712.AA114559726@intimepublishing.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
From: "Azania Brown" <azania@intimepublishing.com>
To: <bug-bison@gnu.org>
X-Mailer: <SMTP32 v8.05>
Precedence: bulk
Subject: automated response
X-BeenThere: bug-bison@gnu.org
X-Mailman-Version: 2.1.5
Reply-To: azania@intimepublishing.com
List-Id: "Bug reports for Bison, the GNU parser generator" <bug-bison.gnu.org>
List-Unsubscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=unsubscribe>
List-Archive: <http://lists.gnu.org/pipermail/bug-bison>
List-Post: <mailto:bug-bison@gnu.org>
List-Help: <mailto:bug-bison-request@gnu.org?subject=help>
List-Subscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=subscribe>
X-List-Received-Date: Thu, 22 Jul 2004 22:15:59 -0000








From MAILER-DAEMON Fri Jul 23 03:25:36 2004
Received: from mailman by lists.gnu.org with archive (Exim 4.33)
	id 1BnuQy-0000NH-MW
	for mharc-bug-bison@gnu.org; Fri, 23 Jul 2004 03:25:36 -0400
Received: from mailman by lists.gnu.org with tmda-scanned (Exim 4.33)
	id 1BnuQw-0000MT-RD
	for bug-bison@gnu.org; Fri, 23 Jul 2004 03:25:34 -0400
Received: from exim by lists.gnu.org with spam-scanned (Exim 4.33)
	id 1BnuQw-0000MC-8p
	for bug-bison@gnu.org; Fri, 23 Jul 2004 03:25:34 -0400
Received: from [199.232.76.173] (helo=monty-python.gnu.org)
	by lists.gnu.org with esmtp (Exim 4.33)
	id 1BnuQu-0000LK-FO; Fri, 23 Jul 2004 03:25:32 -0400
Received: from [200.38.12.191] (helo=red-corb1-2003812-191.telnor.net)
	by monty-python.gnu.org with smtp (Exim 4.34)
	id 1BnuNS-0007ku-V9; Fri, 23 Jul 2004 03:22:01 -0400
X-Message-Info: 59OSPPyyzmk69987EWXVImqcjzHXVBUZMrpi+1458837
Received: from bgin4999.owl.kickoff_discretionary@tds.net ([16.108.71.248]) by
	dyk9040-prxx.200.38.12.191 with Microsoft SMTPSVC(5.0.2195.6824); 
	Fri, 23 Jul 2004 08:10:33 +0100
Message-ID: <299$o499$67223$p8181@frontiernet.net>
Conversion-With-Loss: Yes
Sensitivity: 1
Expiry-Date: Never
Xref: fymdbyhkxrxmwstumgqa
From: "squeal_argonaut000298@rgid.net" <kickoff_discretionary@tds.net>
To: help-make@gnu.org
Date: Fri, 23 Jul 2004 06:14:33 -0100
MIME-Version: 1.0
Content-Type: multipart/alternative;
	boundary="--5274365836009778612"
Cc: gnu-devels-jp@gnu.org, gurhan@gnu.org, bug-bison@gnu.org, federico@gnu.org,
	ot@gnu.org, help-texinfo-admin@gnu.org, bug-bc@gnu.org,
	bug-parted-admin@gnu.org
Subject: We owe you $872427
X-BeenThere: bug-bison@gnu.org
X-Mailman-Version: 2.1.5
Precedence: list
Reply-To: "squeal_argonaut000298@rgid.net" <kickoff_discretionary@tds.net>
List-Id: "Bug reports for Bison, the GNU parser generator" <bug-bison.gnu.org>
List-Unsubscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=unsubscribe>
List-Archive: <http://lists.gnu.org/pipermail/bug-bison>
List-Post: <mailto:bug-bison@gnu.org>
List-Help: <mailto:bug-bison-request@gnu.org?subject=help>
List-Subscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=subscribe>
X-List-Received-Date: Fri, 23 Jul 2004 07:25:35 -0000

----5274365836009778612
Content-Type: text/html;
	charset="iso-6678-7"
Content-Transfer-Encoding: 7Bit

<html>
Hello,<p>

We were reviewing your (m)ortgage record and noticed that your interest<br>
ra[t]e was over 6%. We can give you a guaranteed fixed r[a]te of 3%. You<br>
also qualify for a loan up to $479849<p>

Please fill out the following form at this webpage to complete the process:<br>
<a href="http://savingforu.com/?partid=rm2342">http://savingforu.com/?partid=rm2342</a><p>

We look forward to hearing from you.<p>

Regards,<br>
Saratin Group, LLC
<p><p>
<a href="http://savingforu.com/st.html">not interested</a>
</html>

----5274365836009778612--



From MAILER-DAEMON Sun Jul 25 10:11:12 2004
Received: from mailman by lists.gnu.org with archive (Exim 4.33)
	id 1Bojia-0000lQ-Pg
	for mharc-bug-bison@gnu.org; Sun, 25 Jul 2004 10:11:12 -0400
Received: from mailman by lists.gnu.org with tmda-scanned (Exim 4.33)
	id 1BojiZ-0000kr-3U
	for bug-bison@gnu.org; Sun, 25 Jul 2004 10:11:11 -0400
Received: from exim by lists.gnu.org with spam-scanned (Exim 4.33)
	id 1BojiX-0000kN-55
	for bug-bison@gnu.org; Sun, 25 Jul 2004 10:11:10 -0400
Received: from [199.232.76.173] (helo=monty-python.gnu.org)
	by lists.gnu.org with esmtp (Exim 4.33) id 1BojiX-0000kD-0E
	for bug-bison@gnu.org; Sun, 25 Jul 2004 10:11:09 -0400
Received: from [212.74.114.39] (helo=mk-smarthost-3.mail.uk.tiscali.com)
	by monty-python.gnu.org with esmtp (Exim 4.34) id 1Bojej-0000hV-5z
	for bug-bison@gnu.org; Sun, 25 Jul 2004 10:07:13 -0400
Received: from [80.45.185.163] (port=1242 helo=LAPTOP)
	by mk-smarthost-3.mail.uk.tiscali.com with smtp (Exim 4.30)
	id 1Bojeg-000FJN-8y
	for bug-bison@gnu.org; Sun, 25 Jul 2004 15:07:10 +0100
Message-ID: <000801c47250$adf9dcc0$a3b92d50@LAPTOP>
From: "Ben Davis" <entheh@cantab.net>
To: <bug-bison@gnu.org>
Date: Sun, 25 Jul 2004 15:07:11 +0100
MIME-Version: 1.0
Content-Type: multipart/alternative;
	boundary="----=_NextPart_000_0005_01C47259.0F9A6910"
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook Express 6.00.2800.1437
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1441
Subject: %destructor doesn't work without %union
X-BeenThere: bug-bison@gnu.org
X-Mailman-Version: 2.1.5
Precedence: list
List-Id: "Bug reports for Bison, the GNU parser generator" <bug-bison.gnu.org>
List-Unsubscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=unsubscribe>
List-Archive: <http://lists.gnu.org/pipermail/bug-bison>
List-Post: <mailto:bug-bison@gnu.org>
List-Help: <mailto:bug-bison-request@gnu.org?subject=help>
List-Subscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=subscribe>
X-List-Received-Date: Sun, 25 Jul 2004 14:11:11 -0000

This is a multi-part message in MIME format.

------=_NextPart_000_0005_01C47259.0F9A6910
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Hi,

Please CC all correspondence to me, since I am not on the list.

I have encountered a bug in Bison 1.875b. Specifically, I have found =
that %destructor fails when my code contains a #define YYSTYPE rather =
than a %union. The output contains the following line:

        { delete yyvaluep->(null); };

generated from the action { delete $$; }.

Apologies for not doing all the standard stuff like checking if it's =
fixed in CVS and attaching a minimal example that reproduces the =
problem. But I'm short on time, and it looks to me like a =
straightforward bug with an obvious cause! If you do need more =
information, let me know.

Ben
------=_NextPart_000_0005_01C47259.0F9A6910
Content-Type: text/html;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Hi,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>Please CC all correspondence to me, =
since I am not=20
on the list.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>I have encountered a bug in Bison =
1.875b.=20
Specifically, I have found that %destructor fails when my code contains =
a=20
#define YYSTYPE rather than a %union. The output contains the following=20
line:</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial =
size=3D2>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; { delete=20
yyvaluep-&gt;(null); };</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>generated from the action { delete $$;=20
}.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>Apologies for not doing all the =
standard stuff like=20
checking if it's fixed in CVS and attaching a minimal example that =
reproduces=20
the problem. But I'm short on time, and it looks to me like a =
straightforward=20
bug with an obvious cause! If you do need more information, let me=20
know.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>Ben</FONT></DIV></BODY></HTML>

------=_NextPart_000_0005_01C47259.0F9A6910--





From MAILER-DAEMON Sun Jul 25 12:29:44 2004
Received: from mailman by lists.gnu.org with archive (Exim 4.33)
	id 1Bolse-0005FG-K5
	for mharc-bug-bison@gnu.org; Sun, 25 Jul 2004 12:29:44 -0400
Received: from mailman by lists.gnu.org with tmda-scanned (Exim 4.33)
	id 1Bolsd-0005Eu-BQ
	for bug-bison@gnu.org; Sun, 25 Jul 2004 12:29:43 -0400
Received: from exim by lists.gnu.org with spam-scanned (Exim 4.33)
	id 1Bolsa-0005Ei-Dl
	for bug-bison@gnu.org; Sun, 25 Jul 2004 12:29:43 -0400
Received: from [199.232.76.173] (helo=monty-python.gnu.org)
	by lists.gnu.org with esmtp (Exim 4.33) id 1Bolsa-0005EX-BY
	for bug-bison@gnu.org; Sun, 25 Jul 2004 12:29:40 -0400
Received: from [131.179.128.19] (helo=kiwi.cs.ucla.edu)
	by monty-python.gnu.org with esmtp (Exim 4.34) id 1BolpZ-0008Dl-3Z
	for bug-bison@gnu.org; Sun, 25 Jul 2004 12:26:33 -0400
Received: from penguin.cs.ucla.edu (Penguin.CS.UCLA.EDU [131.179.64.200])
	by kiwi.cs.ucla.edu (8.11.7p1+Sun/8.11.7/UCLACS-5.2) with ESMTP id
	i6PGPwn28590; Sun, 25 Jul 2004 09:25:58 -0700 (PDT)
Received: from eggert by penguin.cs.ucla.edu with local (Exim 3.35 #1 (Debian))
	id 1Bolow-0000AS-00; Sun, 25 Jul 2004 09:25:54 -0700
To: "Ben Davis" <entheh@cantab.net>
References: <000801c47250$adf9dcc0$a3b92d50@LAPTOP>
From: Paul Eggert <eggert@CS.UCLA.EDU>
Date: Sun, 25 Jul 2004 09:25:54 -0700
In-Reply-To: <000801c47250$adf9dcc0$a3b92d50@LAPTOP> (Ben Davis's message of
	"Sun, 25 Jul 2004 15:07:11 +0100")
Message-ID: <87k6wsjbot.fsf@penguin.cs.ucla.edu>
User-Agent: Gnus/5.1006 (Gnus v5.10.6) Emacs/21.3 (gnu/linux)
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Sender: Paul Eggert <eggert@penguin.cs.ucla.edu>
Cc: bug-bison@gnu.org
Subject: Re: %destructor doesn't work without %union
X-BeenThere: bug-bison@gnu.org
X-Mailman-Version: 2.1.5
Precedence: list
List-Id: "Bug reports for Bison, the GNU parser generator" <bug-bison.gnu.org>
List-Unsubscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=unsubscribe>
List-Archive: <http://lists.gnu.org/pipermail/bug-bison>
List-Post: <mailto:bug-bison@gnu.org>
List-Help: <mailto:bug-bison-request@gnu.org?subject=help>
List-Subscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=subscribe>
X-List-Received-Date: Sun, 25 Jul 2004 16:29:43 -0000

Thanks for your bug report.  I think it was fixed by this patch:

http://lists.gnu.org/archive/html/bison-patches/2004-07/msg00002.html

If not, please let us know.



From MAILER-DAEMON Mon Jul 26 13:30:55 2004
Received: from mailman by lists.gnu.org with archive (Exim 4.33)
	id 1Bp9JP-0006MN-9o
	for mharc-bug-bison@gnu.org; Mon, 26 Jul 2004 13:30:55 -0400
Received: from mailman by lists.gnu.org with tmda-scanned (Exim 4.33)
	id 1Bp9JN-0006M9-Qb
	for bug-bison@gnu.org; Mon, 26 Jul 2004 13:30:53 -0400
Received: from exim by lists.gnu.org with spam-scanned (Exim 4.33)
	id 1Bp9JH-0006LZ-Sd
	for bug-bison@gnu.org; Mon, 26 Jul 2004 13:30:53 -0400
Received: from [199.232.76.173] (helo=monty-python.gnu.org)
	by lists.gnu.org with esmtp (Exim 4.33) id 1Bp9JH-0006LP-Pv
	for bug-bison@gnu.org; Mon, 26 Jul 2004 13:30:47 -0400
Received: from [200.83.1.24] (helo=mx01.vtr.net)
	by monty-python.gnu.org with esmtp (Exim 4.34) id 1Bp9Fc-0007rR-Mx
	for bug-bison@gnu.org; Mon, 26 Jul 2004 13:27:05 -0400
Received: from hudson.vtr.net (200.83.1.22) by mx01.vtr.net (7.0.027)
	id 408CB5F902A65932 for bug-bison@gnu.org;
	Mon, 26 Jul 2004 13:26:39 -0400
Received: from vtr.net (200.120.68.85) by hudson.vtr.net (7.0.027)
	(authenticated as sergiobacchi@vtr.net)
	id 40DA85B300BDD35F for bug-bison@gnu.org;
	Mon, 26 Jul 2004 13:26:29 -0400
Message-ID: <41053EC1.3080800@vtr.net>
Date: Mon, 26 Jul 2004 13:26:25 -0400
From: Sergio Bacchi <sergiobacchi@vtr.net>
User-Agent: Mozilla/5.0 (X11; U; Linux i686; pt-BR; rv:1.6) Gecko/20040115
X-Accept-Language: pt-br, pt
MIME-Version: 1.0
To: bug-bison@gnu.org
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: Quoted-Printable
Subject: [GNU Bison 1.875] testsuite: 34 failed
X-BeenThere: bug-bison@gnu.org
X-Mailman-Version: 2.1.5
Precedence: list
List-Id: "Bug reports for Bison, the GNU parser generator" <bug-bison.gnu.org>
List-Unsubscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=unsubscribe>
List-Archive: <http://lists.gnu.org/pipermail/bug-bison>
List-Post: <mailto:bug-bison@gnu.org>
List-Help: <mailto:bug-bison-request@gnu.org?subject=help>
List-Subscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=subscribe>
X-List-Received-Date: Mon, 26 Jul 2004 17:30:54 -0000

Helo.

I am using GNU-Linux Mandrake 10 kernel 2.6.3-7mdksmp
The result of testing is:
/bin/sh ./testsuite
## --------------------------- ##
## GNU Bison 1.875 test suite. ##
## --------------------------- ##

Input Processing.

  1: input.at:28       ok
  2: input.at:46       ok
  3: input.at:64       ok
  4: input.at:93       ok

Output file names.

  5: output.at:38      ok
  6: output.at:40      ok
  7: output.at:42      ok
  8: output.at:44      ok
  9: output.at:46      ok
 10: output.at:48      ok
 11: output.at:52      ok
 12: output.at:54      ok
 13: output.at:57      ok
 14: output.at:61      ok
 15: output.at:63      ok
 16: output.at:67      ok
 17: output.at:72      ok
 18: output.at:75      ok
 19: output.at:79      ok
 20: output.at:83      ok

Grammar Sets (Firsts etc.).

 21: sets.at:66        ok
 22: sets.at:151       ok
 23: sets.at:193       ok

Grammar Reduction.

 24: reduce.at:26      ok
 25: reduce.at:70      ok
 26: reduce.at:125     ok
 27: reduce.at:212     ok
 28: reduce.at:301     ok
 29: reduce.at:342     ok

User Actions.

 30: synclines.at:93   ok
 31: synclines.at:112  ok
 32: synclines.at:135  ok
 33: synclines.at:154  ok
 34: synclines.at:172  FAILED near `synclines.at:172'

Parser Headers.

 35: headers.at:27     ok
 36: headers.at:76     ok
 37: headers.at:77     ok
 38: headers.at:86     ok

User Actions.

 39: actions.at:25     ok
 40: actions.at:89     ok
 41: actions.at:236    ok
 42: actions.at:514    ok

Conflicts.

 43: conflicts.at:31   ok
 44: conflicts.at:51   ok
 45: conflicts.at:131  ok
 46: conflicts.at:238  ok
 47: conflicts.at:360  ok
 48: conflicts.at:479  ok
 49: conflicts.at:499  ok
 50: conflicts.at:516  ok
 51: conflicts.at:536  ok

Simple LALR Calculator.

 52: calc.at:547       ok
 53: calc.at:549       ok
 54: calc.at:550       ok
 55: calc.at:551       ok
 56: calc.at:552       ok
 57: calc.at:553       ok
 58: calc.at:554       ok
 59: calc.at:556       ok
 60: calc.at:558       ok
 61: calc.at:560       ok
 62: calc.at:561       ok
 63: calc.at:563       ok
 64: calc.at:565       ok

Simple GLR Calculator.

 65: calc.at:582       ok
 66: calc.at:584       ok
 67: calc.at:585       ok
 68: calc.at:586       ok
 69: calc.at:587       ok
 70: calc.at:588       ok
 71: calc.at:589       ok
 72: calc.at:591       ok
 73: calc.at:593       ok
 74: calc.at:595       ok
 75: calc.at:596       ok
 76: calc.at:598       ok
 77: calc.at:600       ok

Torture Tests.

 78: torture.at:140    ok
 79: torture.at:231    ok
 80: torture.at:366    ok
 81: torture.at:440    ok
 82: torture.at:461    ok

Existing Grammars.

 83: existing.at:24    ok
 84: existing.at:364   ok

Regression tests.

 85: regression.at:27  ok
 86: regression.at:65  ok
 87: regression.at:87  ok
 88: regression.at:113 ok
 89: regression.at:257 ok
 90: regression.at:280 ok
 91: regression.at:313 ok
 92: regression.at:341 ok
 93: regression.at:372 ok
 94: regression.at:549 ok

C++ Type Syntax (GLR).

 95: cxx-type.at:255   ok
 96: cxx-type.at:262   ok
 97: cxx-type.at:268   ok
 98: cxx-type.at:275   ok
 99: cxx-type.at:282   ok
100: cxx-type.at:289   ok
101: cxx-type.at:296   ok
102: cxx-type.at:302   ok
103: cxx-type.at:309   ok

GLR Regression Test #1.

104: glr-regr1.at:21   ok
## ------------------------------------------------- ##
## ERROR: Suite unsuccessful, 1 of 104 tests failed. ##
## ------------------------------------------------- ##
You may investigate any problem if you feel able to do so, in which
case the test suite provides a good starting point.

Now, failed tests will be executed again, verbosely, and logged
in the file testsuite.log.
## --------------------------- ##
## GNU Bison 1.875 test suite. ##
## --------------------------- ##
34. synclines.at:172: testing Epilogue synch line...
synclines.at:172: $CC $CFLAGS $CPPFLAGS -c syncline.c
stderr:
syncline.c:1:2: #error "1"
synclines.at:172: sed 's/^\([^:]*:[^:.]*\)[.:][^:]*:\(.*\)$/\1:\2/' stder=
r
stdout:
syncline.c:1: #error "1"
synclines.at:172: test "`cat stdout`" =3D 'syncline.c:1: #error "1"' ||=20
exit 77
synclines.at:172: bison -o input.c input.y
synclines.at:172: $CC $CFLAGS $CPPFLAGS -c input.c
stderr:
input.y:7:2: #error "8"
synclines.at:172: sed 's/^\([^:]*:[^:.]*\)[.:][^:]*:\(.*\)$/\1:\2/' stder=
r
stdout:
input.y:7: #error "8"
synclines.at:172: cat stdout
--- -   2004-07-26 13:16:22.208749000 -0400
+++=20
/home/sbacchi/Oscilosc=F3pio/bison-1.875/tests/testsuite.dir/at-stdout   =
   =20
2004-07-26 13:16:22.196689565 -0400
@@ -1,2 +1,2 @@
-input.y:8: #error "8"
+input.y:7: #error "8"

34. synclines.at:172: FAILED near `synclines.at:172'
## ------------------------- ##
## testsuite.log is created. ##
## ------------------------- ##

Please send `testsuite.log' and all information you think might help:

   To: <bug-bison@gnu.org>
   Subject: [GNU Bison 1.875] testsuite: 34 failed

make[2]: ** [check-local] Erro 1
make[2]: Leaving directory `/home/sbacchi/Oscilosc=F3pio/bison-1.875/test=
s'
make[1]: ** [check-am] Erro 2
make[1]: Leaving directory `/home/sbacchi/Oscilosc=F3pio/bison-1.875/test=
s'
make: ** [check-recursive] Erro 1
[sbacchi@192 bison-1.875]$

Thank you.
Sergio Bacchi.
{}



From MAILER-DAEMON Mon Jul 26 14:15:09 2004
Received: from mailman by lists.gnu.org with archive (Exim 4.33)
	id 1BpA0C-0002S6-MO
	for mharc-bug-bison@gnu.org; Mon, 26 Jul 2004 14:15:09 -0400
Received: from mailman by lists.gnu.org with tmda-scanned (Exim 4.33)
	id 1BpA0A-0002RD-BX
	for bug-bison@gnu.org; Mon, 26 Jul 2004 14:15:06 -0400
Received: from exim by lists.gnu.org with spam-scanned (Exim 4.33)
	id 1BpA06-0002PP-5g
	for bug-bison@gnu.org; Mon, 26 Jul 2004 14:15:05 -0400
Received: from [199.232.76.173] (helo=monty-python.gnu.org)
	by lists.gnu.org with esmtp (Exim 4.33) id 1BpA05-0002PG-WF
	for bug-bison@gnu.org; Mon, 26 Jul 2004 14:15:02 -0400
Received: from [131.179.128.19] (helo=kiwi.cs.ucla.edu)
	by monty-python.gnu.org with esmtp (Exim 4.34) id 1Bp9wx-0006pF-2A
	for bug-bison@gnu.org; Mon, 26 Jul 2004 14:11:47 -0400
Received: from penguin.cs.ucla.edu (Penguin.CS.UCLA.EDU [131.179.64.200])
	by kiwi.cs.ucla.edu (8.11.7p1+Sun/8.11.7/UCLACS-5.2) with ESMTP id
	i6QIBen08974; Mon, 26 Jul 2004 11:11:40 -0700 (PDT)
Received: from eggert by penguin.cs.ucla.edu with local (Exim 3.35 #1 (Debian))
	id 1Bp9wn-0004OV-00; Mon, 26 Jul 2004 11:11:37 -0700
To: Sergio Bacchi <sergiobacchi@vtr.net>
References: <41053EC1.3080800@vtr.net>
From: Paul Eggert <eggert@CS.UCLA.EDU>
Date: Mon, 26 Jul 2004 11:11:37 -0700
In-Reply-To: <41053EC1.3080800@vtr.net> (Sergio Bacchi's message of "Mon, 26
	Jul 2004 13:26:25 -0400")
Message-ID: <87n01mtz8m.fsf@penguin.cs.ucla.edu>
User-Agent: Gnus/5.1006 (Gnus v5.10.6) Emacs/21.3 (gnu/linux)
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Sender: Paul Eggert <eggert@penguin.cs.ucla.edu>
Cc: bug-bison@gnu.org
Subject: Re: [GNU Bison 1.875] testsuite: 34 failed
X-BeenThere: bug-bison@gnu.org
X-Mailman-Version: 2.1.5
Precedence: list
List-Id: "Bug reports for Bison, the GNU parser generator" <bug-bison.gnu.org>
List-Unsubscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=unsubscribe>
List-Archive: <http://lists.gnu.org/pipermail/bug-bison>
List-Post: <mailto:bug-bison@gnu.org>
List-Help: <mailto:bug-bison-request@gnu.org?subject=help>
List-Subscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=subscribe>
X-List-Received-Date: Mon, 26 Jul 2004 18:15:07 -0000

Thanks for the bug report.  I think that bug is fixed in the latest
Bison test version:

ftp://alpha.gnu.org/gnu/bison/bison-1.875d.tar.gz



From MAILER-DAEMON Wed Jul 28 13:45:04 2004
Received: from mailman by lists.gnu.org with archive (Exim 4.33)
	id 1BpsUB-0002Tf-Gu
	for mharc-bug-bison@gnu.org; Wed, 28 Jul 2004 13:45:03 -0400
Received: from mailman by lists.gnu.org with tmda-scanned (Exim 4.33)
	id 1BpsU8-0002T6-NI
	for bug-bison@gnu.org; Wed, 28 Jul 2004 13:45:00 -0400
Received: from exim by lists.gnu.org with spam-scanned (Exim 4.33)
	id 1BpsU6-0002S5-IG
	for bug-bison@gnu.org; Wed, 28 Jul 2004 13:44:59 -0400
Received: from [199.232.76.173] (helo=monty-python.gnu.org)
	by lists.gnu.org with esmtp (Exim 4.33) id 1BpsU6-0002S2-E2
	for bug-bison@gnu.org; Wed, 28 Jul 2004 13:44:58 -0400
Received: from [213.163.128.201] (helo=esprit.glocalnet.net)
	by monty-python.gnu.org with esmtp (Exim 4.34) id 1BpsQ0-0006vI-Kp
	for bug-bison@gnu.org; Wed, 28 Jul 2004 13:40:44 -0400
Received: from [62.127.86.129] (62.127.86.131) by esprit.glocalnet.net
	(7.1.016.1) id 40C9A49E00FBA6D8; Wed, 28 Jul 2004 19:40:40 +0200
X-Sender: haberg@imap.math.su.se
Message-Id: <v03110701bd2d92de0c90@[62.127.86.129]>
In-Reply-To: <87n01mtz8m.fsf@penguin.cs.ucla.edu>
References: <41053EC1.3080800@vtr.net> (Sergio Bacchi's message of "Mon,
	26	Jul 2004 13:26:25 -0400") <41053EC1.3080800@vtr.net>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Date: Wed, 28 Jul 2004 19:34:21 +0200
To: Paul Eggert <eggert@CS.UCLA.EDU>
From: Hans Aberg <haberg@math.su.se>
Cc: bug-bison@gnu.org
Subject: Bison compile C as C++
X-BeenThere: bug-bison@gnu.org
X-Mailman-Version: 2.1.5
Precedence: list
List-Id: "Bug reports for Bison, the GNU parser generator" <bug-bison.gnu.org>
List-Unsubscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=unsubscribe>
List-Archive: <http://lists.gnu.org/pipermail/bug-bison>
List-Post: <mailto:bug-bison@gnu.org>
List-Help: <mailto:bug-bison-request@gnu.org?subject=help>
List-Subscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=subscribe>
X-List-Received-Date: Wed, 28 Jul 2004 17:45:01 -0000

The compile the Bison C parser as C++ can perhaps be fixed, so that it
always works under C++, not only when the copy constructors are trivial (as
they must be when using the %union option):

This can be done if the C stack is never copied, but merely allocates new
chunks. Then the stack elements must be accessed via special functions. It
is usually tricky do build such interfaces in C, but it could be that it is
easy, in view of that Bison anyhow writes a C file.

Perhaps at least worth a note in the todo list.

  Hans Aberg





From MAILER-DAEMON Thu Jul 29 10:32:56 2004
Received: from mailman by lists.gnu.org with archive (Exim 4.33)
	id 1BqBxo-0005U6-Jf
	for mharc-bug-bison@gnu.org; Thu, 29 Jul 2004 10:32:56 -0400
Received: from mailman by lists.gnu.org with tmda-scanned (Exim 4.33)
	id 1BqBxm-0005U0-Fc
	for bug-bison@gnu.org; Thu, 29 Jul 2004 10:32:54 -0400
Received: from exim by lists.gnu.org with spam-scanned (Exim 4.33)
	id 1BqBxk-0005To-M2
	for bug-bison@gnu.org; Thu, 29 Jul 2004 10:32:54 -0400
Received: from [199.232.76.173] (helo=monty-python.gnu.org)
	by lists.gnu.org with esmtp (Exim 4.33) id 1BqBxk-0005Tl-Fw
	for bug-bison@gnu.org; Thu, 29 Jul 2004 10:32:52 -0400
Received: from [193.49.104.10] (helo=lirmm.lirmm.fr)
	by monty-python.gnu.org with esmtp (TLSv1:DES-CBC3-SHA:168)
	(Exim 4.34) id 1BqBuM-0002eT-1x
	for bug-bison@gnu.org; Thu, 29 Jul 2004 10:29:22 -0400
Received: from localhost (spam.lirmm.fr [193.49.104.9])
	by lirmm.lirmm.fr (8.12.10/8.12.10/jlo-Nov2003) with ESMTP id
	i6TETJjK026559
	for <bug-bison@gnu.org>; Thu, 29 Jul 2004 16:29:19 +0200 (MEST)
Received: from lirmm.lirmm.fr ([193.49.104.10])
	by localhost (spam.lirmm.fr [193.49.104.9]) (amavisd-new, port 10024)
	with LMTP id 12003-01 for <bug-bison@gnu.org>;
	Thu, 29 Jul 2004 16:29:16 +0200 (CEST)
Received: from bison.lirmm.fr (bison.lirmm.fr [193.49.104.250])
	by lirmm.lirmm.fr (8.12.10/8.12.10/jlo-Nov2003) with ESMTP id
	i6TETFnJ026525
	(version=TLSv1/SSLv3 cipher=AES256-SHA bits=256 verify=NO)
	for <bug-bison@gnu.org>; Thu, 29 Jul 2004 16:29:15 +0200 (MEST)
Received: from pcdeainfo09 (pcdeainfo9.lirmm.fr [193.49.105.112])
	by bison.lirmm.fr (8.12.10/8.12.10/jlo-Nov2003) with ESMTP id
	i6TETEMC013432
	for <bug-bison@gnu.org>; Thu, 29 Jul 2004 16:29:15 +0200 (CEST)
From: Pascal Dugenie <Pascal.Dugenie@lirmm.fr>
Organization: Lirmm
To: bug-bison@gnu.org
Date: Tue, 20 Jul 2004 14:12:49 +0200
User-Agent: KMail/1.6.1
MIME-Version: 1.0
Content-Disposition: inline
Content-Type: text/plain;
  charset="us-ascii"
Content-Transfer-Encoding: 7bit
Message-Id: <200407201412.49318.dugenie@lirmm.fr>
X-Virus/Spam-Scanned: by amavisd-new/ClamAV/SA {jlo-16/03/04} at spam.lirmm.fr
Subject: ## GNU Bison 1.875 test suite. ##
X-BeenThere: bug-bison@gnu.org
X-Mailman-Version: 2.1.5
Precedence: list
List-Id: "Bug reports for Bison, the GNU parser generator" <bug-bison.gnu.org>
List-Unsubscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=unsubscribe>
List-Archive: <http://lists.gnu.org/pipermail/bug-bison>
List-Post: <mailto:bug-bison@gnu.org>
List-Help: <mailto:bug-bison-request@gnu.org?subject=help>
List-Subscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=subscribe>
X-List-Received-Date: Thu, 29 Jul 2004 14:32:54 -0000

## ------------------------------------------------- ##
## ERROR: Suite unsuccessful, 1 of 104 tests failed. ##
## ------------------------------------------------- ##
You may investigate any problem if you feel able to do so, in which
case the test suite provides a good starting point.

Now, failed tests will be executed again, verbosely, and logged
in the file testsuite.log.
## --------------------------- ##
## GNU Bison 1.875 test suite. ##
## --------------------------- ##
34. synclines.at:172: testing Epilogue synch line...
synclines.at:172: $CC $CFLAGS $CPPFLAGS -c syncline.c
stderr:
syncline.c:1:2: #error "1"
synclines.at:172: sed 's/^\([^:]*:[^:.]*\)[.:][^:]*:\(.*\)$/\1:\2/' stderr
stdout:
syncline.c:1: #error "1"
synclines.at:172: test "`cat stdout`" = 'syncline.c:1: #error "1"' || exit 77
synclines.at:172: bison -o input.c input.y
synclines.at:172: $CC $CFLAGS $CPPFLAGS -c input.c
stderr:
input.y:7:2: #error "8"
synclines.at:172: sed 's/^\([^:]*:[^:.]*\)[.:][^:]*:\(.*\)$/\1:\2/' stderr
stdout:
input.y:7: #error "8"
synclines.at:172: cat stdout
--- -   2004-07-20 14:11:07.216613000 +0200
+++ /root/_Recipient/System_admin/progs/Bison/bison-1.875/tests/testsuite.dir/at-stdout 
2004-07-20 14:11:07.208277623 +0200
@@ -1,2 +1,2 @@
-input.y:8: #error "8"
+input.y:7: #error "8"

34. synclines.at:172: FAILED near `synclines.at:172'
## ------------------------- ##
## testsuite.log is created. ##
## ------------------------- ##

Please send `testsuite.log' and all information you think might help:

   To: <bug-bison@gnu.org>
   Subject: [GNU Bison 1.875] testsuite: 34 failed

make[2]: *** [check-local] Erreur 1
make[2]: Leaving directory `/usr/progs/Bison/bison-1.875/tests'
make[1]: *** [check-am] Erreur 2
make[1]: Leaving directory `/usr/progs/Bison/bison-1.875/tests'
make: *** [check-recursive] Erreur 1



From MAILER-DAEMON Thu Jul 29 14:42:34 2004
Received: from mailman by lists.gnu.org with archive (Exim 4.33)
	id 1BqFrO-0006w1-EL
	for mharc-bug-bison@gnu.org; Thu, 29 Jul 2004 14:42:34 -0400
Received: from mailman by lists.gnu.org with tmda-scanned (Exim 4.33)
	id 1BqFrN-0006vv-7v
	for bug-bison@gnu.org; Thu, 29 Jul 2004 14:42:33 -0400
Received: from exim by lists.gnu.org with spam-scanned (Exim 4.33)
	id 1BqFrL-0006vj-Oq
	for bug-bison@gnu.org; Thu, 29 Jul 2004 14:42:32 -0400
Received: from [199.232.76.173] (helo=monty-python.gnu.org)
	by lists.gnu.org with esmtp (Exim 4.33) id 1BqFrL-0006vg-IP
	for bug-bison@gnu.org; Thu, 29 Jul 2004 14:42:31 -0400
Received: from [131.179.128.19] (helo=kiwi.cs.ucla.edu)
	by monty-python.gnu.org with esmtp (Exim 4.34) id 1BqFo7-0007wR-0q
	for bug-bison@gnu.org; Thu, 29 Jul 2004 14:39:11 -0400
Received: from penguin.cs.ucla.edu (Penguin.CS.UCLA.EDU [131.179.64.200])
	by kiwi.cs.ucla.edu (8.11.7p1+Sun/8.11.7/UCLACS-5.2) with ESMTP id
	i6TId4X13106; Thu, 29 Jul 2004 11:39:05 -0700 (PDT)
Received: from eggert by penguin.cs.ucla.edu with local (Exim 3.35 #1 (Debian))
	id 1BqFo0-0004oD-00; Thu, 29 Jul 2004 11:39:04 -0700
To: Pascal Dugenie <Pascal.Dugenie@lirmm.fr>
References: <200407201412.49318.dugenie@lirmm.fr>
From: Paul Eggert <eggert@CS.UCLA.EDU>
Date: Thu, 29 Jul 2004 11:39:04 -0700
In-Reply-To: <200407201412.49318.dugenie@lirmm.fr> (Pascal Dugenie's message
	of "Tue, 20 Jul 2004 14:12:49 +0200")
Message-ID: <871xiuirp3.fsf@penguin.cs.ucla.edu>
User-Agent: Gnus/5.1006 (Gnus v5.10.6) Emacs/21.3 (gnu/linux)
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Sender: Paul Eggert <eggert@penguin.cs.ucla.edu>
Cc: bug-bison@gnu.org
Subject: Re: ## GNU Bison 1.875 test suite. ##
X-BeenThere: bug-bison@gnu.org
X-Mailman-Version: 2.1.5
Precedence: list
List-Id: "Bug reports for Bison, the GNU parser generator" <bug-bison.gnu.org>
List-Unsubscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=unsubscribe>
List-Archive: <http://lists.gnu.org/pipermail/bug-bison>
List-Post: <mailto:bug-bison@gnu.org>
List-Help: <mailto:bug-bison-request@gnu.org?subject=help>
List-Subscribe: <http://lists.gnu.org/mailman/listinfo/bug-bison>,
	<mailto:bug-bison-request@gnu.org?subject=subscribe>
X-List-Received-Date: Thu, 29 Jul 2004 18:42:33 -0000

Thanks for your bug report.  I think that bug is fixed in the latest test
version:

ftp://alpha.gnu.org/gnu/bison/bison-1.875d.tar.gz



