From groff-commit-admin  Sun Jun  4 23:47:19 2000
Received: (from wlemb@localhost)
	by genba.ffii.org (8.9.3/8.9.3/Debian/GNU) id XAA25329;
	Sun, 4 Jun 2000 23:47:19 +0200
Date: Sun, 4 Jun 2000 23:47:19 +0200
Message-Id: <200006042147.XAA25329@genba.ffii.org>
From: wlemb@ffii.org
To: groff-commit@ffii.org
Subject: [Groff-commit] Changes to //var/cvs/groff

Log from commit: 

Update of /var/cvs/groff/contrib/mm
In directory genba:/vol2/tmp/cvs-serv25319

Modified Files:
	ChangeLog groff_mm.man 
Log Message:
* Fixing a lot of typos in groff_mm.man



From groff-commit-admin  Sun Jun 11 08:27:26 2000
Received: (from wlemb@localhost)
	by genba.ffii.org (8.9.3/8.9.3/Debian/GNU) id IAA14626;
	Sun, 11 Jun 2000 08:27:26 +0200
Date: Sun, 11 Jun 2000 08:27:26 +0200
Message-Id: <200006110627.IAA14626@genba.ffii.org>
From: wlemb@ffii.org
To: groff-commit@ffii.org
Subject: [Groff-commit] Changes to //var/cvs/groff

Log from commit: 

Update of /var/cvs/groff
In directory genba:/vol2/tmp/cvs-serv14609

Modified Files:
	ChangeLog Makefile.in aclocal.m4 configure configure.in 
Log Message:
Replaced specific checks for function declarations with a generic
routine taken from GNU bfd.

* aclocal.m4 (GROFF_NEED_DECLARATION): New function.
GROFF_PUTENV, GROFF_POPEN, GROFF_PCLOSE, GROFF_HYPOT: Removed.
* configure.in: Use it.
* src/devices/grolbp/lbp.cc, src/include/lib.h,
src/preproc/grn/hgraph.cc, src/preproc/pic/pic.h,
src/roff/groff/groff.cc: Use it.
* Makefile.in, configure: Updated.


* src/devides/grolbp/lbp.h: Removed unused variables.



From groff-commit-admin  Sun Jun 11 08:27:26 2000
Received: (from wlemb@localhost)
	by genba.ffii.org (8.9.3/8.9.3/Debian/GNU) id IAA14643;
	Sun, 11 Jun 2000 08:27:26 +0200
Date: Sun, 11 Jun 2000 08:27:26 +0200
Message-Id: <200006110627.IAA14643@genba.ffii.org>
From: wlemb@ffii.org
To: groff-commit@ffii.org
Subject: [Groff-commit] Changes to //var/cvs/groff

Log from commit: 

Update of /var/cvs/groff/src/devices/grolbp
In directory genba:/vol2/tmp/cvs-serv14609/src/devices/grolbp

Modified Files:
	lbp.cc lbp.h 
Log Message:
Replaced specific checks for function declarations with a generic
routine taken from GNU bfd.

* aclocal.m4 (GROFF_NEED_DECLARATION): New function.
GROFF_PUTENV, GROFF_POPEN, GROFF_PCLOSE, GROFF_HYPOT: Removed.
* configure.in: Use it.
* src/devices/grolbp/lbp.cc, src/include/lib.h,
src/preproc/grn/hgraph.cc, src/preproc/pic/pic.h,
src/roff/groff/groff.cc: Use it.
* Makefile.in, configure: Updated.


* src/devides/grolbp/lbp.h: Removed unused variables.



From groff-commit-admin  Sun Jun 11 08:27:27 2000
Received: (from wlemb@localhost)
	by genba.ffii.org (8.9.3/8.9.3/Debian/GNU) id IAA14659;
	Sun, 11 Jun 2000 08:27:27 +0200
Date: Sun, 11 Jun 2000 08:27:27 +0200
Message-Id: <200006110627.IAA14659@genba.ffii.org>
From: wlemb@ffii.org
To: groff-commit@ffii.org
Subject: [Groff-commit] Changes to //var/cvs/groff

Log from commit: 

Update of /var/cvs/groff/src/include
In directory genba:/vol2/tmp/cvs-serv14609/src/include

Modified Files:
	lib.h 
Log Message:
Replaced specific checks for function declarations with a generic
routine taken from GNU bfd.

* aclocal.m4 (GROFF_NEED_DECLARATION): New function.
GROFF_PUTENV, GROFF_POPEN, GROFF_PCLOSE, GROFF_HYPOT: Removed.
* configure.in: Use it.
* src/devices/grolbp/lbp.cc, src/include/lib.h,
src/preproc/grn/hgraph.cc, src/preproc/pic/pic.h,
src/roff/groff/groff.cc: Use it.
* Makefile.in, configure: Updated.


* src/devides/grolbp/lbp.h: Removed unused variables.



From groff-commit-admin  Sun Jun 11 08:27:29 2000
Received: (from wlemb@localhost)
	by genba.ffii.org (8.9.3/8.9.3/Debian/GNU) id IAA14731;
	Sun, 11 Jun 2000 08:27:29 +0200
Date: Sun, 11 Jun 2000 08:27:29 +0200
Message-Id: <200006110627.IAA14731@genba.ffii.org>
From: wlemb@ffii.org
To: groff-commit@ffii.org
Subject: [Groff-commit] Changes to //var/cvs/groff

Log from commit: 

Update of /var/cvs/groff/src/preproc/grn
In directory genba:/vol2/tmp/cvs-serv14609/src/preproc/grn

Modified Files:
	hgraph.cc 
Log Message:
Replaced specific checks for function declarations with a generic
routine taken from GNU bfd.

* aclocal.m4 (GROFF_NEED_DECLARATION): New function.
GROFF_PUTENV, GROFF_POPEN, GROFF_PCLOSE, GROFF_HYPOT: Removed.
* configure.in: Use it.
* src/devices/grolbp/lbp.cc, src/include/lib.h,
src/preproc/grn/hgraph.cc, src/preproc/pic/pic.h,
src/roff/groff/groff.cc: Use it.
* Makefile.in, configure: Updated.


* src/devides/grolbp/lbp.h: Removed unused variables.



From groff-commit-admin  Sun Jun 11 08:27:30 2000
Received: (from wlemb@localhost)
	by genba.ffii.org (8.9.3/8.9.3/Debian/GNU) id IAA14764;
	Sun, 11 Jun 2000 08:27:30 +0200
Date: Sun, 11 Jun 2000 08:27:30 +0200
Message-Id: <200006110627.IAA14764@genba.ffii.org>
From: wlemb@ffii.org
To: groff-commit@ffii.org
Subject: [Groff-commit] Changes to //var/cvs/groff

Log from commit: 

Update of /var/cvs/groff/src/preproc/pic
In directory genba:/vol2/tmp/cvs-serv14609/src/preproc/pic

Modified Files:
	pic.h 
Log Message:
Replaced specific checks for function declarations with a generic
routine taken from GNU bfd.

* aclocal.m4 (GROFF_NEED_DECLARATION): New function.
GROFF_PUTENV, GROFF_POPEN, GROFF_PCLOSE, GROFF_HYPOT: Removed.
* configure.in: Use it.
* src/devices/grolbp/lbp.cc, src/include/lib.h,
src/preproc/grn/hgraph.cc, src/preproc/pic/pic.h,
src/roff/groff/groff.cc: Use it.
* Makefile.in, configure: Updated.


* src/devides/grolbp/lbp.h: Removed unused variables.



From groff-commit-admin  Sun Jun 11 08:27:31 2000
Received: (from wlemb@localhost)
	by genba.ffii.org (8.9.3/8.9.3/Debian/GNU) id IAA14812;
	Sun, 11 Jun 2000 08:27:31 +0200
Date: Sun, 11 Jun 2000 08:27:31 +0200
Message-Id: <200006110627.IAA14812@genba.ffii.org>
From: wlemb@ffii.org
To: groff-commit@ffii.org
Subject: [Groff-commit] Changes to //var/cvs/groff

Log from commit: 

Update of /var/cvs/groff/src/roff/groff
In directory genba:/vol2/tmp/cvs-serv14609/src/roff/groff

Modified Files:
	groff.cc 
Log Message:
Replaced specific checks for function declarations with a generic
routine taken from GNU bfd.

* aclocal.m4 (GROFF_NEED_DECLARATION): New function.
GROFF_PUTENV, GROFF_POPEN, GROFF_PCLOSE, GROFF_HYPOT: Removed.
* configure.in: Use it.
* src/devices/grolbp/lbp.cc, src/include/lib.h,
src/preproc/grn/hgraph.cc, src/preproc/pic/pic.h,
src/roff/groff/groff.cc: Use it.
* Makefile.in, configure: Updated.


* src/devides/grolbp/lbp.h: Removed unused variables.



From groff-commit-admin  Sun Jun 18 12:03:58 2000
Received: (from wlemb@localhost)
	by genba.ffii.org (8.9.3/8.9.3/Debian/GNU) id MAA27667;
	Sun, 18 Jun 2000 12:03:58 +0200
Date: Sun, 18 Jun 2000 12:03:58 +0200
Message-Id: <200006181003.MAA27667@genba.ffii.org>
From: wlemb@ffii.org
To: groff-commit@ffii.org
Subject: [Groff-commit] Changes to //var/cvs/groff

Log from commit: 

Update of /var/cvs/groff/arch
In directory genba:/vol2/tmp/cvs-serv27649

Log Message:
djgpp-specific stuff

Status:

Vendor Tag:	groff
Release Tags:	eli
		
N groff/arch/djgpp/config.bat
N groff/arch/djgpp/config.sed
N groff/arch/djgpp/config.site
N groff/arch/djgpp/t-groff.bat
N groff/arch/djgpp/README

No conflicts created by this import



From groff-commit-admin  Sun Jun 18 12:08:06 2000
Received: (from wlemb@localhost)
	by genba.ffii.org (8.9.3/8.9.3/Debian/GNU) id MAA28210;
	Sun, 18 Jun 2000 12:08:06 +0200
Date: Sun, 18 Jun 2000 12:08:06 +0200
Message-Id: <200006181008.MAA28210@genba.ffii.org>
From: wlemb@ffii.org
To: groff-commit@ffii.org
Subject: [Groff-commit] Changes to //var/cvs/groff

Log from commit: 

Update of /var/cvs/groff/contrib/mm
In directory genba:/vol2/tmp/cvs-serv28193

Modified Files:
	ChangeLog Makefile.sim 
Log Message:
* Makefile.sim (.man.n): Replace `;' with `|', since DOS/Windows
path lists use the semicolon as a separator.



From groff-commit-admin  Sun Jun 18 12:09:09 2000
Received: (from wlemb@localhost)
	by genba.ffii.org (8.9.3/8.9.3/Debian/GNU) id MAA28479;
	Sun, 18 Jun 2000 12:09:09 +0200
Date: Sun, 18 Jun 2000 12:09:09 +0200
Message-Id: <200006181009.MAA28479@genba.ffii.org>
From: wlemb@ffii.org
To: groff-commit@ffii.org
Subject: [Groff-commit] Changes to //var/cvs/groff

Log from commit: 

Update of /var/cvs/groff/src/devices/grohtml
In directory genba:/vol2/tmp/cvs-serv28435

Modified Files:
	ChangeLog html.cc 
Log Message:
* html.cc [!_POSIX_VERSION]: Include limits.h and dirent.h or
sys/dir.h.  Define NAME_MAX using MAXNAMLEN.  Include nonposix.h.
(file_name_max): New function.
(html_printer::make_new_image_name): If the filesystem doesn't
support file names longer than 14 characters, use a shorter
image_name string.
(html_printer::convert_to_image): Enlarge the size of buffer[] to
accomodate 2 temp file names plus some slack.  Don't put n at the
end of commands passed to system().  Redirect stderr to the null
device programmatically, not via the shell.  Use NULL_DEV, not
literal "/dev/null".  Print diagnostics if any calls to system()
failed.

irrespective of the boolean `margin_on'.  Fixes a divide by zero bug
and a column bug as reported by Steve Blinkhorn <steve@prd.co.uk>.



From groff-commit-admin  Sun Jun 18 12:13:51 2000
Received: (from wlemb@localhost)
	by genba.ffii.org (8.9.3/8.9.3/Debian/GNU) id MAA29309;
	Sun, 18 Jun 2000 12:13:51 +0200
Date: Sun, 18 Jun 2000 12:13:51 +0200
Message-Id: <200006181013.MAA29309@genba.ffii.org>
From: wlemb@ffii.org
To: groff-commit@ffii.org
Subject: [Groff-commit] Changes to //var/cvs/groff

Log from commit: 

Update of /var/cvs/groff
In directory genba:/vol2/tmp/cvs-serv28889

Modified Files:
	ChangeLog INSTALL MORE.STUFF Makefile.comm Makefile.in 
	gendef.sh 
Log Message:
* src/utils/tfmtodit/tfmtodit.cc: #include nonposix.h.
(tfm::load, gf::load): Open tfm and gf files in binary mode: these
are binary files.
(main): Support non-Posix systems with several different styles of
slash characters in file names.

* src/utils/pfbtops/pfbtops.c: #include nonposix.h.
(main) [SET_BINARY]: Switch stdin into binary mode.

* src/utils/indxbib/indxbib.cc: #include nonposix.h.
(main): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.
(main) [__MSDOS__]: If renaming the temporary index file fails
because it has more than one dot in its trunk, replace the dot
with an underscore and try again.
(do_file): Use FOPEN_RB instead of "r".  Skip every CR before a
Newline.
[__MSDOS__ || _MSC_VER]: Stop at the first ^Z character.

* src/utils/hpftodit/hpftodit.cc: #include nonposix.h.
(File::File): Open the input file in binary mode.  Strip CR
characters from each CR-LF pair.
(xbasename): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.

* src/include/Makefile.sub (HDRS): Add nonposix.h.

* src/roff/troff/node.cc [HAVE_UNISTD_H]: Include <unistd.h>.
(WIFEXITED, WEXITSTATUS, WTERMSIG, WIFSTOPPED, WSTOPSIG)
[!_POSIX_VERSION]: Define for traditional Unix systems.
(real_output_file::real_output_file): Remove the MSVC-specific
call to popen, use instead POPEN_WT, appropriately defined on
nonposix.h.  #include nonposix.h.
(real_output_file::~real_output_file): Remove the MSVC-specific
call to pclose, a suitable macro is now defined on nonposix.h.
Use the portable macros WIFEXITED, WIFSIGNALED, WTERMSIG, WSTOPSIG
and WEXITSTATUS instead of assuming traditional Unix
interpretation of the status returned by pclose.

* src/roff/troff/input.cc (pipe_source): Remove the MSVC-specific
call to popen, use POPEN_RT instead (appropriately defined on
nonposix.h).  #include nonposix.h.
(ps_bbox_request): Open the PostScript file in binary mode.
Close the file after processing it.
(getpid) [_MSC_VER]: Remove; a suitable macro is now defined on
nonposix.h.

* src/roff/groff/pipeline.c (run_pipeline) [__MSDOS__ || _WIN32]:
A version of run_pipeline that doesn't use `fork'.
(signal_catcher) [__MSDOS__ || _WIN32]: New function.
(system_shell_name, system_shell_dash_c)
(is_system_shell) [__MSDOS__ || _WIN32]: New functions, to hide
the ugliness of testing DOS/Windows file names for equality, and
support both stock shells and ports of Unix shells.

* src/roff/groff/groff.cc: #include nonposix.h.
(BSHELL): Definition moved to nonposix.h.
(main): Use PATH_SEP[0] instead of literal ':'.  Use BSHELL_DASH_C
instead of a literal "-c".
(xbasename): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.
(possible_command::print): Use BSHELL_DASH_C and IS_BSHELL instead
of literal strings.

* src/preproc/soelim/soelim.cc: #include nonposix.h.
(do_file): Use IS_ABSOLUTE instead of testing for a literal '/'.

* src/preproc/pic/Makefile.sub (YTABH): Change pic.tab.h to
pic_tab.h.

* src/preproc/pic/lex.cc: Change pic.tab.h to pic_tab.h.

* src/preproc/eqn/Makefile.sub (YTABH): Rename eqn.tab.h to
eqn_tab.h.

* src/preproc/eqn/lex.cc: #include eqn_tab.h, not eqn.tab.h.

* src/libs/libgroff/tmpfile.cc (DEFAULT_TMPDIR) [P_tmpdir]: If
P_tmpdir is defined, use it instead of the literal "/tmp".
(remove_tmp_files, add_tmp_file): New functions.
(xtmpfile): Record temporary files and register an atexit function
to delete them explicitly, instead of relying on the OS to do
that, which doesn't work on non-Unix systems.

* src/libs/libgroff/searchpath.cc: #include nonposix.h.
(search_path::search_path): Use PATH_SEP instead of a literal
colon.
(search_path::command_line_dir): Ditto.
(search_path::open_file): Use IS_ABSOLUTE, PATH_SEP and DIR_SEPS,
to support non-Posix systems.

* src/libc/libbib/search.cc: #include nonposix.h.
(search_list::add_file): Open the file in binary mode.

* src/libs/libbib/linear.cc: #include nonposix.h.
(file_buffer::load): Remove r characters preceding n from the
loaded buffer.

* src/libs/libbib/index.cc: #include nonposix.h.
(make_index_search_item): Open index_filename in O_BINARY mode.
(index_search_item_iterator::get_tag): Ditto.  Remove r
characters before n characters.
(index_search_item::check_files): Open files in binary mode.
(index_search_item::munge_filename): Support DOS-style file names
with backslashes and drive letters, use IS_ABSOLUTE.

* src/devices/grops/ps.cc: #include nonposix.h.
(main) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grolj4/lj4.cc: #include nonposix.h.
(main) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grolbp/lbp.cc: #include nonposix.h
(fill_pattern) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grodvi/dvi.cc: #include nonposix.h.
[_MSC_VER]: Remove inclusion of Windows-specific headers (done by
nonposix.h).
(main) [SET_BINARY]: Switch stdout to binary mode.
[_MSC_VER]: Remove an explicit call to _setmode.

* src/include/nonposix.h: New file.

* Makefile.in (ENVSETUP): New variable, to set up case-sensitive
operation when building with DJGPP.
($(TARGETS), dot, $(LIBDIRS), $(CPROGDIRS), $(CCPROGDIRS))
($(DEVDIRS), $(TTYDEVDIRS), $(INCDIRS), $(OTHERDIRS)): Use
ENVSETUP.

* Makefile.comm: mv y.tab.[ch] to y_tab.[ch], to make it work on
MS-DOS.
(.man.n): Replace `;' with `|', since FONTPATH, MACROPATH,
etc. can include a semi-colon on DOS/Windows.
(depend.temp): Use depend1.temp instead of depend.temp1, to
prevent files from overerwiting each other on 8+3 filesystems.

* gendef.sh (t): Change definition to work with DOS/Windows.

doc/groff.texinfo: Apart of some typo corrections, I also changed
some index entris, to make them more non-ambiguous, and also put
@ignore around some parts that are not yet written, to allow the
Info output be readable.



From groff-commit-admin  Sun Jun 18 12:13:51 2000
Received: (from wlemb@localhost)
	by genba.ffii.org (8.9.3/8.9.3/Debian/GNU) id MAA29330;
	Sun, 18 Jun 2000 12:13:51 +0200
Date: Sun, 18 Jun 2000 12:13:51 +0200
Message-Id: <200006181013.MAA29330@genba.ffii.org>
From: wlemb@ffii.org
To: groff-commit@ffii.org
Subject: [Groff-commit] Changes to //var/cvs/groff

Log from commit: 

Update of /var/cvs/groff/doc
In directory genba:/vol2/tmp/cvs-serv28889/doc

Modified Files:
	groff.texinfo 
Log Message:
* src/utils/tfmtodit/tfmtodit.cc: #include nonposix.h.
(tfm::load, gf::load): Open tfm and gf files in binary mode: these
are binary files.
(main): Support non-Posix systems with several different styles of
slash characters in file names.

* src/utils/pfbtops/pfbtops.c: #include nonposix.h.
(main) [SET_BINARY]: Switch stdin into binary mode.

* src/utils/indxbib/indxbib.cc: #include nonposix.h.
(main): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.
(main) [__MSDOS__]: If renaming the temporary index file fails
because it has more than one dot in its trunk, replace the dot
with an underscore and try again.
(do_file): Use FOPEN_RB instead of "r".  Skip every CR before a
Newline.
[__MSDOS__ || _MSC_VER]: Stop at the first ^Z character.

* src/utils/hpftodit/hpftodit.cc: #include nonposix.h.
(File::File): Open the input file in binary mode.  Strip CR
characters from each CR-LF pair.
(xbasename): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.

* src/include/Makefile.sub (HDRS): Add nonposix.h.

* src/roff/troff/node.cc [HAVE_UNISTD_H]: Include <unistd.h>.
(WIFEXITED, WEXITSTATUS, WTERMSIG, WIFSTOPPED, WSTOPSIG)
[!_POSIX_VERSION]: Define for traditional Unix systems.
(real_output_file::real_output_file): Remove the MSVC-specific
call to popen, use instead POPEN_WT, appropriately defined on
nonposix.h.  #include nonposix.h.
(real_output_file::~real_output_file): Remove the MSVC-specific
call to pclose, a suitable macro is now defined on nonposix.h.
Use the portable macros WIFEXITED, WIFSIGNALED, WTERMSIG, WSTOPSIG
and WEXITSTATUS instead of assuming traditional Unix
interpretation of the status returned by pclose.

* src/roff/troff/input.cc (pipe_source): Remove the MSVC-specific
call to popen, use POPEN_RT instead (appropriately defined on
nonposix.h).  #include nonposix.h.
(ps_bbox_request): Open the PostScript file in binary mode.
Close the file after processing it.
(getpid) [_MSC_VER]: Remove; a suitable macro is now defined on
nonposix.h.

* src/roff/groff/pipeline.c (run_pipeline) [__MSDOS__ || _WIN32]:
A version of run_pipeline that doesn't use `fork'.
(signal_catcher) [__MSDOS__ || _WIN32]: New function.
(system_shell_name, system_shell_dash_c)
(is_system_shell) [__MSDOS__ || _WIN32]: New functions, to hide
the ugliness of testing DOS/Windows file names for equality, and
support both stock shells and ports of Unix shells.

* src/roff/groff/groff.cc: #include nonposix.h.
(BSHELL): Definition moved to nonposix.h.
(main): Use PATH_SEP[0] instead of literal ':'.  Use BSHELL_DASH_C
instead of a literal "-c".
(xbasename): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.
(possible_command::print): Use BSHELL_DASH_C and IS_BSHELL instead
of literal strings.

* src/preproc/soelim/soelim.cc: #include nonposix.h.
(do_file): Use IS_ABSOLUTE instead of testing for a literal '/'.

* src/preproc/pic/Makefile.sub (YTABH): Change pic.tab.h to
pic_tab.h.

* src/preproc/pic/lex.cc: Change pic.tab.h to pic_tab.h.

* src/preproc/eqn/Makefile.sub (YTABH): Rename eqn.tab.h to
eqn_tab.h.

* src/preproc/eqn/lex.cc: #include eqn_tab.h, not eqn.tab.h.

* src/libs/libgroff/tmpfile.cc (DEFAULT_TMPDIR) [P_tmpdir]: If
P_tmpdir is defined, use it instead of the literal "/tmp".
(remove_tmp_files, add_tmp_file): New functions.
(xtmpfile): Record temporary files and register an atexit function
to delete them explicitly, instead of relying on the OS to do
that, which doesn't work on non-Unix systems.

* src/libs/libgroff/searchpath.cc: #include nonposix.h.
(search_path::search_path): Use PATH_SEP instead of a literal
colon.
(search_path::command_line_dir): Ditto.
(search_path::open_file): Use IS_ABSOLUTE, PATH_SEP and DIR_SEPS,
to support non-Posix systems.

* src/libc/libbib/search.cc: #include nonposix.h.
(search_list::add_file): Open the file in binary mode.

* src/libs/libbib/linear.cc: #include nonposix.h.
(file_buffer::load): Remove r characters preceding n from the
loaded buffer.

* src/libs/libbib/index.cc: #include nonposix.h.
(make_index_search_item): Open index_filename in O_BINARY mode.
(index_search_item_iterator::get_tag): Ditto.  Remove r
characters before n characters.
(index_search_item::check_files): Open files in binary mode.
(index_search_item::munge_filename): Support DOS-style file names
with backslashes and drive letters, use IS_ABSOLUTE.

* src/devices/grops/ps.cc: #include nonposix.h.
(main) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grolj4/lj4.cc: #include nonposix.h.
(main) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grolbp/lbp.cc: #include nonposix.h
(fill_pattern) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grodvi/dvi.cc: #include nonposix.h.
[_MSC_VER]: Remove inclusion of Windows-specific headers (done by
nonposix.h).
(main) [SET_BINARY]: Switch stdout to binary mode.
[_MSC_VER]: Remove an explicit call to _setmode.

* src/include/nonposix.h: New file.

* Makefile.in (ENVSETUP): New variable, to set up case-sensitive
operation when building with DJGPP.
($(TARGETS), dot, $(LIBDIRS), $(CPROGDIRS), $(CCPROGDIRS))
($(DEVDIRS), $(TTYDEVDIRS), $(INCDIRS), $(OTHERDIRS)): Use
ENVSETUP.

* Makefile.comm: mv y.tab.[ch] to y_tab.[ch], to make it work on
MS-DOS.
(.man.n): Replace `;' with `|', since FONTPATH, MACROPATH,
etc. can include a semi-colon on DOS/Windows.
(depend.temp): Use depend1.temp instead of depend.temp1, to
prevent files from overerwiting each other on 8+3 filesystems.

* gendef.sh (t): Change definition to work with DOS/Windows.

doc/groff.texinfo: Apart of some typo corrections, I also changed
some index entris, to make them more non-ambiguous, and also put
@ignore around some parts that are not yet written, to allow the
Info output be readable.



From groff-commit-admin  Sun Jun 18 12:13:55 2000
Received: (from wlemb@localhost)
	by genba.ffii.org (8.9.3/8.9.3/Debian/GNU) id MAA29386;
	Sun, 18 Jun 2000 12:13:55 +0200
Date: Sun, 18 Jun 2000 12:13:55 +0200
Message-Id: <200006181013.MAA29386@genba.ffii.org>
From: wlemb@ffii.org
To: groff-commit@ffii.org
Subject: [Groff-commit] Changes to //var/cvs/groff

Log from commit: 

Update of /var/cvs/groff/src/devices/grodvi
In directory genba:/vol2/tmp/cvs-serv28889/src/devices/grodvi

Modified Files:
	dvi.cc 
Log Message:
* src/utils/tfmtodit/tfmtodit.cc: #include nonposix.h.
(tfm::load, gf::load): Open tfm and gf files in binary mode: these
are binary files.
(main): Support non-Posix systems with several different styles of
slash characters in file names.

* src/utils/pfbtops/pfbtops.c: #include nonposix.h.
(main) [SET_BINARY]: Switch stdin into binary mode.

* src/utils/indxbib/indxbib.cc: #include nonposix.h.
(main): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.
(main) [__MSDOS__]: If renaming the temporary index file fails
because it has more than one dot in its trunk, replace the dot
with an underscore and try again.
(do_file): Use FOPEN_RB instead of "r".  Skip every CR before a
Newline.
[__MSDOS__ || _MSC_VER]: Stop at the first ^Z character.

* src/utils/hpftodit/hpftodit.cc: #include nonposix.h.
(File::File): Open the input file in binary mode.  Strip CR
characters from each CR-LF pair.
(xbasename): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.

* src/include/Makefile.sub (HDRS): Add nonposix.h.

* src/roff/troff/node.cc [HAVE_UNISTD_H]: Include <unistd.h>.
(WIFEXITED, WEXITSTATUS, WTERMSIG, WIFSTOPPED, WSTOPSIG)
[!_POSIX_VERSION]: Define for traditional Unix systems.
(real_output_file::real_output_file): Remove the MSVC-specific
call to popen, use instead POPEN_WT, appropriately defined on
nonposix.h.  #include nonposix.h.
(real_output_file::~real_output_file): Remove the MSVC-specific
call to pclose, a suitable macro is now defined on nonposix.h.
Use the portable macros WIFEXITED, WIFSIGNALED, WTERMSIG, WSTOPSIG
and WEXITSTATUS instead of assuming traditional Unix
interpretation of the status returned by pclose.

* src/roff/troff/input.cc (pipe_source): Remove the MSVC-specific
call to popen, use POPEN_RT instead (appropriately defined on
nonposix.h).  #include nonposix.h.
(ps_bbox_request): Open the PostScript file in binary mode.
Close the file after processing it.
(getpid) [_MSC_VER]: Remove; a suitable macro is now defined on
nonposix.h.

* src/roff/groff/pipeline.c (run_pipeline) [__MSDOS__ || _WIN32]:
A version of run_pipeline that doesn't use `fork'.
(signal_catcher) [__MSDOS__ || _WIN32]: New function.
(system_shell_name, system_shell_dash_c)
(is_system_shell) [__MSDOS__ || _WIN32]: New functions, to hide
the ugliness of testing DOS/Windows file names for equality, and
support both stock shells and ports of Unix shells.

* src/roff/groff/groff.cc: #include nonposix.h.
(BSHELL): Definition moved to nonposix.h.
(main): Use PATH_SEP[0] instead of literal ':'.  Use BSHELL_DASH_C
instead of a literal "-c".
(xbasename): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.
(possible_command::print): Use BSHELL_DASH_C and IS_BSHELL instead
of literal strings.

* src/preproc/soelim/soelim.cc: #include nonposix.h.
(do_file): Use IS_ABSOLUTE instead of testing for a literal '/'.

* src/preproc/pic/Makefile.sub (YTABH): Change pic.tab.h to
pic_tab.h.

* src/preproc/pic/lex.cc: Change pic.tab.h to pic_tab.h.

* src/preproc/eqn/Makefile.sub (YTABH): Rename eqn.tab.h to
eqn_tab.h.

* src/preproc/eqn/lex.cc: #include eqn_tab.h, not eqn.tab.h.

* src/libs/libgroff/tmpfile.cc (DEFAULT_TMPDIR) [P_tmpdir]: If
P_tmpdir is defined, use it instead of the literal "/tmp".
(remove_tmp_files, add_tmp_file): New functions.
(xtmpfile): Record temporary files and register an atexit function
to delete them explicitly, instead of relying on the OS to do
that, which doesn't work on non-Unix systems.

* src/libs/libgroff/searchpath.cc: #include nonposix.h.
(search_path::search_path): Use PATH_SEP instead of a literal
colon.
(search_path::command_line_dir): Ditto.
(search_path::open_file): Use IS_ABSOLUTE, PATH_SEP and DIR_SEPS,
to support non-Posix systems.

* src/libc/libbib/search.cc: #include nonposix.h.
(search_list::add_file): Open the file in binary mode.

* src/libs/libbib/linear.cc: #include nonposix.h.
(file_buffer::load): Remove r characters preceding n from the
loaded buffer.

* src/libs/libbib/index.cc: #include nonposix.h.
(make_index_search_item): Open index_filename in O_BINARY mode.
(index_search_item_iterator::get_tag): Ditto.  Remove r
characters before n characters.
(index_search_item::check_files): Open files in binary mode.
(index_search_item::munge_filename): Support DOS-style file names
with backslashes and drive letters, use IS_ABSOLUTE.

* src/devices/grops/ps.cc: #include nonposix.h.
(main) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grolj4/lj4.cc: #include nonposix.h.
(main) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grolbp/lbp.cc: #include nonposix.h
(fill_pattern) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grodvi/dvi.cc: #include nonposix.h.
[_MSC_VER]: Remove inclusion of Windows-specific headers (done by
nonposix.h).
(main) [SET_BINARY]: Switch stdout to binary mode.
[_MSC_VER]: Remove an explicit call to _setmode.

* src/include/nonposix.h: New file.

* Makefile.in (ENVSETUP): New variable, to set up case-sensitive
operation when building with DJGPP.
($(TARGETS), dot, $(LIBDIRS), $(CPROGDIRS), $(CCPROGDIRS))
($(DEVDIRS), $(TTYDEVDIRS), $(INCDIRS), $(OTHERDIRS)): Use
ENVSETUP.

* Makefile.comm: mv y.tab.[ch] to y_tab.[ch], to make it work on
MS-DOS.
(.man.n): Replace `;' with `|', since FONTPATH, MACROPATH,
etc. can include a semi-colon on DOS/Windows.
(depend.temp): Use depend1.temp instead of depend.temp1, to
prevent files from overerwiting each other on 8+3 filesystems.

* gendef.sh (t): Change definition to work with DOS/Windows.

doc/groff.texinfo: Apart of some typo corrections, I also changed
some index entris, to make them more non-ambiguous, and also put
@ignore around some parts that are not yet written, to allow the
Info output be readable.



From groff-commit-admin  Sun Jun 18 12:13:56 2000
Received: (from wlemb@localhost)
	by genba.ffii.org (8.9.3/8.9.3/Debian/GNU) id MAA29416;
	Sun, 18 Jun 2000 12:13:56 +0200
Date: Sun, 18 Jun 2000 12:13:56 +0200
Message-Id: <200006181013.MAA29416@genba.ffii.org>
From: wlemb@ffii.org
To: groff-commit@ffii.org
Subject: [Groff-commit] Changes to //var/cvs/groff

Log from commit: 

Update of /var/cvs/groff/src/devices/grolbp
In directory genba:/vol2/tmp/cvs-serv28889/src/devices/grolbp

Modified Files:
	lbp.cc 
Log Message:
* src/utils/tfmtodit/tfmtodit.cc: #include nonposix.h.
(tfm::load, gf::load): Open tfm and gf files in binary mode: these
are binary files.
(main): Support non-Posix systems with several different styles of
slash characters in file names.

* src/utils/pfbtops/pfbtops.c: #include nonposix.h.
(main) [SET_BINARY]: Switch stdin into binary mode.

* src/utils/indxbib/indxbib.cc: #include nonposix.h.
(main): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.
(main) [__MSDOS__]: If renaming the temporary index file fails
because it has more than one dot in its trunk, replace the dot
with an underscore and try again.
(do_file): Use FOPEN_RB instead of "r".  Skip every CR before a
Newline.
[__MSDOS__ || _MSC_VER]: Stop at the first ^Z character.

* src/utils/hpftodit/hpftodit.cc: #include nonposix.h.
(File::File): Open the input file in binary mode.  Strip CR
characters from each CR-LF pair.
(xbasename): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.

* src/include/Makefile.sub (HDRS): Add nonposix.h.

* src/roff/troff/node.cc [HAVE_UNISTD_H]: Include <unistd.h>.
(WIFEXITED, WEXITSTATUS, WTERMSIG, WIFSTOPPED, WSTOPSIG)
[!_POSIX_VERSION]: Define for traditional Unix systems.
(real_output_file::real_output_file): Remove the MSVC-specific
call to popen, use instead POPEN_WT, appropriately defined on
nonposix.h.  #include nonposix.h.
(real_output_file::~real_output_file): Remove the MSVC-specific
call to pclose, a suitable macro is now defined on nonposix.h.
Use the portable macros WIFEXITED, WIFSIGNALED, WTERMSIG, WSTOPSIG
and WEXITSTATUS instead of assuming traditional Unix
interpretation of the status returned by pclose.

* src/roff/troff/input.cc (pipe_source): Remove the MSVC-specific
call to popen, use POPEN_RT instead (appropriately defined on
nonposix.h).  #include nonposix.h.
(ps_bbox_request): Open the PostScript file in binary mode.
Close the file after processing it.
(getpid) [_MSC_VER]: Remove; a suitable macro is now defined on
nonposix.h.

* src/roff/groff/pipeline.c (run_pipeline) [__MSDOS__ || _WIN32]:
A version of run_pipeline that doesn't use `fork'.
(signal_catcher) [__MSDOS__ || _WIN32]: New function.
(system_shell_name, system_shell_dash_c)
(is_system_shell) [__MSDOS__ || _WIN32]: New functions, to hide
the ugliness of testing DOS/Windows file names for equality, and
support both stock shells and ports of Unix shells.

* src/roff/groff/groff.cc: #include nonposix.h.
(BSHELL): Definition moved to nonposix.h.
(main): Use PATH_SEP[0] instead of literal ':'.  Use BSHELL_DASH_C
instead of a literal "-c".
(xbasename): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.
(possible_command::print): Use BSHELL_DASH_C and IS_BSHELL instead
of literal strings.

* src/preproc/soelim/soelim.cc: #include nonposix.h.
(do_file): Use IS_ABSOLUTE instead of testing for a literal '/'.

* src/preproc/pic/Makefile.sub (YTABH): Change pic.tab.h to
pic_tab.h.

* src/preproc/pic/lex.cc: Change pic.tab.h to pic_tab.h.

* src/preproc/eqn/Makefile.sub (YTABH): Rename eqn.tab.h to
eqn_tab.h.

* src/preproc/eqn/lex.cc: #include eqn_tab.h, not eqn.tab.h.

* src/libs/libgroff/tmpfile.cc (DEFAULT_TMPDIR) [P_tmpdir]: If
P_tmpdir is defined, use it instead of the literal "/tmp".
(remove_tmp_files, add_tmp_file): New functions.
(xtmpfile): Record temporary files and register an atexit function
to delete them explicitly, instead of relying on the OS to do
that, which doesn't work on non-Unix systems.

* src/libs/libgroff/searchpath.cc: #include nonposix.h.
(search_path::search_path): Use PATH_SEP instead of a literal
colon.
(search_path::command_line_dir): Ditto.
(search_path::open_file): Use IS_ABSOLUTE, PATH_SEP and DIR_SEPS,
to support non-Posix systems.

* src/libc/libbib/search.cc: #include nonposix.h.
(search_list::add_file): Open the file in binary mode.

* src/libs/libbib/linear.cc: #include nonposix.h.
(file_buffer::load): Remove r characters preceding n from the
loaded buffer.

* src/libs/libbib/index.cc: #include nonposix.h.
(make_index_search_item): Open index_filename in O_BINARY mode.
(index_search_item_iterator::get_tag): Ditto.  Remove r
characters before n characters.
(index_search_item::check_files): Open files in binary mode.
(index_search_item::munge_filename): Support DOS-style file names
with backslashes and drive letters, use IS_ABSOLUTE.

* src/devices/grops/ps.cc: #include nonposix.h.
(main) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grolj4/lj4.cc: #include nonposix.h.
(main) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grolbp/lbp.cc: #include nonposix.h
(fill_pattern) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grodvi/dvi.cc: #include nonposix.h.
[_MSC_VER]: Remove inclusion of Windows-specific headers (done by
nonposix.h).
(main) [SET_BINARY]: Switch stdout to binary mode.
[_MSC_VER]: Remove an explicit call to _setmode.

* src/include/nonposix.h: New file.

* Makefile.in (ENVSETUP): New variable, to set up case-sensitive
operation when building with DJGPP.
($(TARGETS), dot, $(LIBDIRS), $(CPROGDIRS), $(CCPROGDIRS))
($(DEVDIRS), $(TTYDEVDIRS), $(INCDIRS), $(OTHERDIRS)): Use
ENVSETUP.

* Makefile.comm: mv y.tab.[ch] to y_tab.[ch], to make it work on
MS-DOS.
(.man.n): Replace `;' with `|', since FONTPATH, MACROPATH,
etc. can include a semi-colon on DOS/Windows.
(depend.temp): Use depend1.temp instead of depend.temp1, to
prevent files from overerwiting each other on 8+3 filesystems.

* gendef.sh (t): Change definition to work with DOS/Windows.

doc/groff.texinfo: Apart of some typo corrections, I also changed
some index entris, to make them more non-ambiguous, and also put
@ignore around some parts that are not yet written, to allow the
Info output be readable.



From groff-commit-admin  Sun Jun 18 12:13:56 2000
Received: (from wlemb@localhost)
	by genba.ffii.org (8.9.3/8.9.3/Debian/GNU) id MAA29448;
	Sun, 18 Jun 2000 12:13:56 +0200
Date: Sun, 18 Jun 2000 12:13:56 +0200
Message-Id: <200006181013.MAA29448@genba.ffii.org>
From: wlemb@ffii.org
To: groff-commit@ffii.org
Subject: [Groff-commit] Changes to //var/cvs/groff

Log from commit: 

Update of /var/cvs/groff/src/devices/grolj4
In directory genba:/vol2/tmp/cvs-serv28889/src/devices/grolj4

Modified Files:
	lj4.cc 
Log Message:
* src/utils/tfmtodit/tfmtodit.cc: #include nonposix.h.
(tfm::load, gf::load): Open tfm and gf files in binary mode: these
are binary files.
(main): Support non-Posix systems with several different styles of
slash characters in file names.

* src/utils/pfbtops/pfbtops.c: #include nonposix.h.
(main) [SET_BINARY]: Switch stdin into binary mode.

* src/utils/indxbib/indxbib.cc: #include nonposix.h.
(main): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.
(main) [__MSDOS__]: If renaming the temporary index file fails
because it has more than one dot in its trunk, replace the dot
with an underscore and try again.
(do_file): Use FOPEN_RB instead of "r".  Skip every CR before a
Newline.
[__MSDOS__ || _MSC_VER]: Stop at the first ^Z character.

* src/utils/hpftodit/hpftodit.cc: #include nonposix.h.
(File::File): Open the input file in binary mode.  Strip CR
characters from each CR-LF pair.
(xbasename): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.

* src/include/Makefile.sub (HDRS): Add nonposix.h.

* src/roff/troff/node.cc [HAVE_UNISTD_H]: Include <unistd.h>.
(WIFEXITED, WEXITSTATUS, WTERMSIG, WIFSTOPPED, WSTOPSIG)
[!_POSIX_VERSION]: Define for traditional Unix systems.
(real_output_file::real_output_file): Remove the MSVC-specific
call to popen, use instead POPEN_WT, appropriately defined on
nonposix.h.  #include nonposix.h.
(real_output_file::~real_output_file): Remove the MSVC-specific
call to pclose, a suitable macro is now defined on nonposix.h.
Use the portable macros WIFEXITED, WIFSIGNALED, WTERMSIG, WSTOPSIG
and WEXITSTATUS instead of assuming traditional Unix
interpretation of the status returned by pclose.

* src/roff/troff/input.cc (pipe_source): Remove the MSVC-specific
call to popen, use POPEN_RT instead (appropriately defined on
nonposix.h).  #include nonposix.h.
(ps_bbox_request): Open the PostScript file in binary mode.
Close the file after processing it.
(getpid) [_MSC_VER]: Remove; a suitable macro is now defined on
nonposix.h.

* src/roff/groff/pipeline.c (run_pipeline) [__MSDOS__ || _WIN32]:
A version of run_pipeline that doesn't use `fork'.
(signal_catcher) [__MSDOS__ || _WIN32]: New function.
(system_shell_name, system_shell_dash_c)
(is_system_shell) [__MSDOS__ || _WIN32]: New functions, to hide
the ugliness of testing DOS/Windows file names for equality, and
support both stock shells and ports of Unix shells.

* src/roff/groff/groff.cc: #include nonposix.h.
(BSHELL): Definition moved to nonposix.h.
(main): Use PATH_SEP[0] instead of literal ':'.  Use BSHELL_DASH_C
instead of a literal "-c".
(xbasename): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.
(possible_command::print): Use BSHELL_DASH_C and IS_BSHELL instead
of literal strings.

* src/preproc/soelim/soelim.cc: #include nonposix.h.
(do_file): Use IS_ABSOLUTE instead of testing for a literal '/'.

* src/preproc/pic/Makefile.sub (YTABH): Change pic.tab.h to
pic_tab.h.

* src/preproc/pic/lex.cc: Change pic.tab.h to pic_tab.h.

* src/preproc/eqn/Makefile.sub (YTABH): Rename eqn.tab.h to
eqn_tab.h.

* src/preproc/eqn/lex.cc: #include eqn_tab.h, not eqn.tab.h.

* src/libs/libgroff/tmpfile.cc (DEFAULT_TMPDIR) [P_tmpdir]: If
P_tmpdir is defined, use it instead of the literal "/tmp".
(remove_tmp_files, add_tmp_file): New functions.
(xtmpfile): Record temporary files and register an atexit function
to delete them explicitly, instead of relying on the OS to do
that, which doesn't work on non-Unix systems.

* src/libs/libgroff/searchpath.cc: #include nonposix.h.
(search_path::search_path): Use PATH_SEP instead of a literal
colon.
(search_path::command_line_dir): Ditto.
(search_path::open_file): Use IS_ABSOLUTE, PATH_SEP and DIR_SEPS,
to support non-Posix systems.

* src/libc/libbib/search.cc: #include nonposix.h.
(search_list::add_file): Open the file in binary mode.

* src/libs/libbib/linear.cc: #include nonposix.h.
(file_buffer::load): Remove r characters preceding n from the
loaded buffer.

* src/libs/libbib/index.cc: #include nonposix.h.
(make_index_search_item): Open index_filename in O_BINARY mode.
(index_search_item_iterator::get_tag): Ditto.  Remove r
characters before n characters.
(index_search_item::check_files): Open files in binary mode.
(index_search_item::munge_filename): Support DOS-style file names
with backslashes and drive letters, use IS_ABSOLUTE.

* src/devices/grops/ps.cc: #include nonposix.h.
(main) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grolj4/lj4.cc: #include nonposix.h.
(main) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grolbp/lbp.cc: #include nonposix.h
(fill_pattern) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grodvi/dvi.cc: #include nonposix.h.
[_MSC_VER]: Remove inclusion of Windows-specific headers (done by
nonposix.h).
(main) [SET_BINARY]: Switch stdout to binary mode.
[_MSC_VER]: Remove an explicit call to _setmode.

* src/include/nonposix.h: New file.

* Makefile.in (ENVSETUP): New variable, to set up case-sensitive
operation when building with DJGPP.
($(TARGETS), dot, $(LIBDIRS), $(CPROGDIRS), $(CCPROGDIRS))
($(DEVDIRS), $(TTYDEVDIRS), $(INCDIRS), $(OTHERDIRS)): Use
ENVSETUP.

* Makefile.comm: mv y.tab.[ch] to y_tab.[ch], to make it work on
MS-DOS.
(.man.n): Replace `;' with `|', since FONTPATH, MACROPATH,
etc. can include a semi-colon on DOS/Windows.
(depend.temp): Use depend1.temp instead of depend.temp1, to
prevent files from overerwiting each other on 8+3 filesystems.

* gendef.sh (t): Change definition to work with DOS/Windows.

doc/groff.texinfo: Apart of some typo corrections, I also changed
some index entris, to make them more non-ambiguous, and also put
@ignore around some parts that are not yet written, to allow the
Info output be readable.



From groff-commit-admin  Sun Jun 18 12:13:57 2000
Received: (from wlemb@localhost)
	by genba.ffii.org (8.9.3/8.9.3/Debian/GNU) id MAA29482;
	Sun, 18 Jun 2000 12:13:57 +0200
Date: Sun, 18 Jun 2000 12:13:57 +0200
Message-Id: <200006181013.MAA29482@genba.ffii.org>
From: wlemb@ffii.org
To: groff-commit@ffii.org
Subject: [Groff-commit] Changes to //var/cvs/groff

Log from commit: 

Update of /var/cvs/groff/src/devices/grops
In directory genba:/vol2/tmp/cvs-serv28889/src/devices/grops

Modified Files:
	ps.cc 
Log Message:
* src/utils/tfmtodit/tfmtodit.cc: #include nonposix.h.
(tfm::load, gf::load): Open tfm and gf files in binary mode: these
are binary files.
(main): Support non-Posix systems with several different styles of
slash characters in file names.

* src/utils/pfbtops/pfbtops.c: #include nonposix.h.
(main) [SET_BINARY]: Switch stdin into binary mode.

* src/utils/indxbib/indxbib.cc: #include nonposix.h.
(main): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.
(main) [__MSDOS__]: If renaming the temporary index file fails
because it has more than one dot in its trunk, replace the dot
with an underscore and try again.
(do_file): Use FOPEN_RB instead of "r".  Skip every CR before a
Newline.
[__MSDOS__ || _MSC_VER]: Stop at the first ^Z character.

* src/utils/hpftodit/hpftodit.cc: #include nonposix.h.
(File::File): Open the input file in binary mode.  Strip CR
characters from each CR-LF pair.
(xbasename): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.

* src/include/Makefile.sub (HDRS): Add nonposix.h.

* src/roff/troff/node.cc [HAVE_UNISTD_H]: Include <unistd.h>.
(WIFEXITED, WEXITSTATUS, WTERMSIG, WIFSTOPPED, WSTOPSIG)
[!_POSIX_VERSION]: Define for traditional Unix systems.
(real_output_file::real_output_file): Remove the MSVC-specific
call to popen, use instead POPEN_WT, appropriately defined on
nonposix.h.  #include nonposix.h.
(real_output_file::~real_output_file): Remove the MSVC-specific
call to pclose, a suitable macro is now defined on nonposix.h.
Use the portable macros WIFEXITED, WIFSIGNALED, WTERMSIG, WSTOPSIG
and WEXITSTATUS instead of assuming traditional Unix
interpretation of the status returned by pclose.

* src/roff/troff/input.cc (pipe_source): Remove the MSVC-specific
call to popen, use POPEN_RT instead (appropriately defined on
nonposix.h).  #include nonposix.h.
(ps_bbox_request): Open the PostScript file in binary mode.
Close the file after processing it.
(getpid) [_MSC_VER]: Remove; a suitable macro is now defined on
nonposix.h.

* src/roff/groff/pipeline.c (run_pipeline) [__MSDOS__ || _WIN32]:
A version of run_pipeline that doesn't use `fork'.
(signal_catcher) [__MSDOS__ || _WIN32]: New function.
(system_shell_name, system_shell_dash_c)
(is_system_shell) [__MSDOS__ || _WIN32]: New functions, to hide
the ugliness of testing DOS/Windows file names for equality, and
support both stock shells and ports of Unix shells.

* src/roff/groff/groff.cc: #include nonposix.h.
(BSHELL): Definition moved to nonposix.h.
(main): Use PATH_SEP[0] instead of literal ':'.  Use BSHELL_DASH_C
instead of a literal "-c".
(xbasename): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.
(possible_command::print): Use BSHELL_DASH_C and IS_BSHELL instead
of literal strings.

* src/preproc/soelim/soelim.cc: #include nonposix.h.
(do_file): Use IS_ABSOLUTE instead of testing for a literal '/'.

* src/preproc/pic/Makefile.sub (YTABH): Change pic.tab.h to
pic_tab.h.

* src/preproc/pic/lex.cc: Change pic.tab.h to pic_tab.h.

* src/preproc/eqn/Makefile.sub (YTABH): Rename eqn.tab.h to
eqn_tab.h.

* src/preproc/eqn/lex.cc: #include eqn_tab.h, not eqn.tab.h.

* src/libs/libgroff/tmpfile.cc (DEFAULT_TMPDIR) [P_tmpdir]: If
P_tmpdir is defined, use it instead of the literal "/tmp".
(remove_tmp_files, add_tmp_file): New functions.
(xtmpfile): Record temporary files and register an atexit function
to delete them explicitly, instead of relying on the OS to do
that, which doesn't work on non-Unix systems.

* src/libs/libgroff/searchpath.cc: #include nonposix.h.
(search_path::search_path): Use PATH_SEP instead of a literal
colon.
(search_path::command_line_dir): Ditto.
(search_path::open_file): Use IS_ABSOLUTE, PATH_SEP and DIR_SEPS,
to support non-Posix systems.

* src/libc/libbib/search.cc: #include nonposix.h.
(search_list::add_file): Open the file in binary mode.

* src/libs/libbib/linear.cc: #include nonposix.h.
(file_buffer::load): Remove r characters preceding n from the
loaded buffer.

* src/libs/libbib/index.cc: #include nonposix.h.
(make_index_search_item): Open index_filename in O_BINARY mode.
(index_search_item_iterator::get_tag): Ditto.  Remove r
characters before n characters.
(index_search_item::check_files): Open files in binary mode.
(index_search_item::munge_filename): Support DOS-style file names
with backslashes and drive letters, use IS_ABSOLUTE.

* src/devices/grops/ps.cc: #include nonposix.h.
(main) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grolj4/lj4.cc: #include nonposix.h.
(main) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grolbp/lbp.cc: #include nonposix.h
(fill_pattern) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grodvi/dvi.cc: #include nonposix.h.
[_MSC_VER]: Remove inclusion of Windows-specific headers (done by
nonposix.h).
(main) [SET_BINARY]: Switch stdout to binary mode.
[_MSC_VER]: Remove an explicit call to _setmode.

* src/include/nonposix.h: New file.

* Makefile.in (ENVSETUP): New variable, to set up case-sensitive
operation when building with DJGPP.
($(TARGETS), dot, $(LIBDIRS), $(CPROGDIRS), $(CCPROGDIRS))
($(DEVDIRS), $(TTYDEVDIRS), $(INCDIRS), $(OTHERDIRS)): Use
ENVSETUP.

* Makefile.comm: mv y.tab.[ch] to y_tab.[ch], to make it work on
MS-DOS.
(.man.n): Replace `;' with `|', since FONTPATH, MACROPATH,
etc. can include a semi-colon on DOS/Windows.
(depend.temp): Use depend1.temp instead of depend.temp1, to
prevent files from overerwiting each other on 8+3 filesystems.

* gendef.sh (t): Change definition to work with DOS/Windows.

doc/groff.texinfo: Apart of some typo corrections, I also changed
some index entris, to make them more non-ambiguous, and also put
@ignore around some parts that are not yet written, to allow the
Info output be readable.



From groff-commit-admin  Sun Jun 18 12:13:59 2000
Received: (from wlemb@localhost)
	by genba.ffii.org (8.9.3/8.9.3/Debian/GNU) id MAA29540;
	Sun, 18 Jun 2000 12:13:59 +0200
Date: Sun, 18 Jun 2000 12:13:59 +0200
Message-Id: <200006181013.MAA29540@genba.ffii.org>
From: wlemb@ffii.org
To: groff-commit@ffii.org
Subject: [Groff-commit] Changes to //var/cvs/groff

Log from commit: 

Update of /var/cvs/groff/src/include
In directory genba:/vol2/tmp/cvs-serv28889/src/include

Modified Files:
	Makefile.sub 
Log Message:
* src/utils/tfmtodit/tfmtodit.cc: #include nonposix.h.
(tfm::load, gf::load): Open tfm and gf files in binary mode: these
are binary files.
(main): Support non-Posix systems with several different styles of
slash characters in file names.

* src/utils/pfbtops/pfbtops.c: #include nonposix.h.
(main) [SET_BINARY]: Switch stdin into binary mode.

* src/utils/indxbib/indxbib.cc: #include nonposix.h.
(main): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.
(main) [__MSDOS__]: If renaming the temporary index file fails
because it has more than one dot in its trunk, replace the dot
with an underscore and try again.
(do_file): Use FOPEN_RB instead of "r".  Skip every CR before a
Newline.
[__MSDOS__ || _MSC_VER]: Stop at the first ^Z character.

* src/utils/hpftodit/hpftodit.cc: #include nonposix.h.
(File::File): Open the input file in binary mode.  Strip CR
characters from each CR-LF pair.
(xbasename): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.

* src/include/Makefile.sub (HDRS): Add nonposix.h.

* src/roff/troff/node.cc [HAVE_UNISTD_H]: Include <unistd.h>.
(WIFEXITED, WEXITSTATUS, WTERMSIG, WIFSTOPPED, WSTOPSIG)
[!_POSIX_VERSION]: Define for traditional Unix systems.
(real_output_file::real_output_file): Remove the MSVC-specific
call to popen, use instead POPEN_WT, appropriately defined on
nonposix.h.  #include nonposix.h.
(real_output_file::~real_output_file): Remove the MSVC-specific
call to pclose, a suitable macro is now defined on nonposix.h.
Use the portable macros WIFEXITED, WIFSIGNALED, WTERMSIG, WSTOPSIG
and WEXITSTATUS instead of assuming traditional Unix
interpretation of the status returned by pclose.

* src/roff/troff/input.cc (pipe_source): Remove the MSVC-specific
call to popen, use POPEN_RT instead (appropriately defined on
nonposix.h).  #include nonposix.h.
(ps_bbox_request): Open the PostScript file in binary mode.
Close the file after processing it.
(getpid) [_MSC_VER]: Remove; a suitable macro is now defined on
nonposix.h.

* src/roff/groff/pipeline.c (run_pipeline) [__MSDOS__ || _WIN32]:
A version of run_pipeline that doesn't use `fork'.
(signal_catcher) [__MSDOS__ || _WIN32]: New function.
(system_shell_name, system_shell_dash_c)
(is_system_shell) [__MSDOS__ || _WIN32]: New functions, to hide
the ugliness of testing DOS/Windows file names for equality, and
support both stock shells and ports of Unix shells.

* src/roff/groff/groff.cc: #include nonposix.h.
(BSHELL): Definition moved to nonposix.h.
(main): Use PATH_SEP[0] instead of literal ':'.  Use BSHELL_DASH_C
instead of a literal "-c".
(xbasename): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.
(possible_command::print): Use BSHELL_DASH_C and IS_BSHELL instead
of literal strings.

* src/preproc/soelim/soelim.cc: #include nonposix.h.
(do_file): Use IS_ABSOLUTE instead of testing for a literal '/'.

* src/preproc/pic/Makefile.sub (YTABH): Change pic.tab.h to
pic_tab.h.

* src/preproc/pic/lex.cc: Change pic.tab.h to pic_tab.h.

* src/preproc/eqn/Makefile.sub (YTABH): Rename eqn.tab.h to
eqn_tab.h.

* src/preproc/eqn/lex.cc: #include eqn_tab.h, not eqn.tab.h.

* src/libs/libgroff/tmpfile.cc (DEFAULT_TMPDIR) [P_tmpdir]: If
P_tmpdir is defined, use it instead of the literal "/tmp".
(remove_tmp_files, add_tmp_file): New functions.
(xtmpfile): Record temporary files and register an atexit function
to delete them explicitly, instead of relying on the OS to do
that, which doesn't work on non-Unix systems.

* src/libs/libgroff/searchpath.cc: #include nonposix.h.
(search_path::search_path): Use PATH_SEP instead of a literal
colon.
(search_path::command_line_dir): Ditto.
(search_path::open_file): Use IS_ABSOLUTE, PATH_SEP and DIR_SEPS,
to support non-Posix systems.

* src/libc/libbib/search.cc: #include nonposix.h.
(search_list::add_file): Open the file in binary mode.

* src/libs/libbib/linear.cc: #include nonposix.h.
(file_buffer::load): Remove r characters preceding n from the
loaded buffer.

* src/libs/libbib/index.cc: #include nonposix.h.
(make_index_search_item): Open index_filename in O_BINARY mode.
(index_search_item_iterator::get_tag): Ditto.  Remove r
characters before n characters.
(index_search_item::check_files): Open files in binary mode.
(index_search_item::munge_filename): Support DOS-style file names
with backslashes and drive letters, use IS_ABSOLUTE.

* src/devices/grops/ps.cc: #include nonposix.h.
(main) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grolj4/lj4.cc: #include nonposix.h.
(main) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grolbp/lbp.cc: #include nonposix.h
(fill_pattern) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grodvi/dvi.cc: #include nonposix.h.
[_MSC_VER]: Remove inclusion of Windows-specific headers (done by
nonposix.h).
(main) [SET_BINARY]: Switch stdout to binary mode.
[_MSC_VER]: Remove an explicit call to _setmode.

* src/include/nonposix.h: New file.

* Makefile.in (ENVSETUP): New variable, to set up case-sensitive
operation when building with DJGPP.
($(TARGETS), dot, $(LIBDIRS), $(CPROGDIRS), $(CCPROGDIRS))
($(DEVDIRS), $(TTYDEVDIRS), $(INCDIRS), $(OTHERDIRS)): Use
ENVSETUP.

* Makefile.comm: mv y.tab.[ch] to y_tab.[ch], to make it work on
MS-DOS.
(.man.n): Replace `;' with `|', since FONTPATH, MACROPATH,
etc. can include a semi-colon on DOS/Windows.
(depend.temp): Use depend1.temp instead of depend.temp1, to
prevent files from overerwiting each other on 8+3 filesystems.

* gendef.sh (t): Change definition to work with DOS/Windows.

doc/groff.texinfo: Apart of some typo corrections, I also changed
some index entris, to make them more non-ambiguous, and also put
@ignore around some parts that are not yet written, to allow the
Info output be readable.



From groff-commit-admin  Sun Jun 18 12:14:00 2000
Received: (from wlemb@localhost)
	by genba.ffii.org (8.9.3/8.9.3/Debian/GNU) id MAA29595;
	Sun, 18 Jun 2000 12:14:00 +0200
Date: Sun, 18 Jun 2000 12:14:00 +0200
Message-Id: <200006181014.MAA29595@genba.ffii.org>
From: wlemb@ffii.org
To: groff-commit@ffii.org
Subject: [Groff-commit] Changes to //var/cvs/groff

Log from commit: 

Update of /var/cvs/groff/src/libs/libbib
In directory genba:/vol2/tmp/cvs-serv28889/src/libs/libbib

Modified Files:
	index.cc linear.cc search.cc 
Log Message:
* src/utils/tfmtodit/tfmtodit.cc: #include nonposix.h.
(tfm::load, gf::load): Open tfm and gf files in binary mode: these
are binary files.
(main): Support non-Posix systems with several different styles of
slash characters in file names.

* src/utils/pfbtops/pfbtops.c: #include nonposix.h.
(main) [SET_BINARY]: Switch stdin into binary mode.

* src/utils/indxbib/indxbib.cc: #include nonposix.h.
(main): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.
(main) [__MSDOS__]: If renaming the temporary index file fails
because it has more than one dot in its trunk, replace the dot
with an underscore and try again.
(do_file): Use FOPEN_RB instead of "r".  Skip every CR before a
Newline.
[__MSDOS__ || _MSC_VER]: Stop at the first ^Z character.

* src/utils/hpftodit/hpftodit.cc: #include nonposix.h.
(File::File): Open the input file in binary mode.  Strip CR
characters from each CR-LF pair.
(xbasename): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.

* src/include/Makefile.sub (HDRS): Add nonposix.h.

* src/roff/troff/node.cc [HAVE_UNISTD_H]: Include <unistd.h>.
(WIFEXITED, WEXITSTATUS, WTERMSIG, WIFSTOPPED, WSTOPSIG)
[!_POSIX_VERSION]: Define for traditional Unix systems.
(real_output_file::real_output_file): Remove the MSVC-specific
call to popen, use instead POPEN_WT, appropriately defined on
nonposix.h.  #include nonposix.h.
(real_output_file::~real_output_file): Remove the MSVC-specific
call to pclose, a suitable macro is now defined on nonposix.h.
Use the portable macros WIFEXITED, WIFSIGNALED, WTERMSIG, WSTOPSIG
and WEXITSTATUS instead of assuming traditional Unix
interpretation of the status returned by pclose.

* src/roff/troff/input.cc (pipe_source): Remove the MSVC-specific
call to popen, use POPEN_RT instead (appropriately defined on
nonposix.h).  #include nonposix.h.
(ps_bbox_request): Open the PostScript file in binary mode.
Close the file after processing it.
(getpid) [_MSC_VER]: Remove; a suitable macro is now defined on
nonposix.h.

* src/roff/groff/pipeline.c (run_pipeline) [__MSDOS__ || _WIN32]:
A version of run_pipeline that doesn't use `fork'.
(signal_catcher) [__MSDOS__ || _WIN32]: New function.
(system_shell_name, system_shell_dash_c)
(is_system_shell) [__MSDOS__ || _WIN32]: New functions, to hide
the ugliness of testing DOS/Windows file names for equality, and
support both stock shells and ports of Unix shells.

* src/roff/groff/groff.cc: #include nonposix.h.
(BSHELL): Definition moved to nonposix.h.
(main): Use PATH_SEP[0] instead of literal ':'.  Use BSHELL_DASH_C
instead of a literal "-c".
(xbasename): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.
(possible_command::print): Use BSHELL_DASH_C and IS_BSHELL instead
of literal strings.

* src/preproc/soelim/soelim.cc: #include nonposix.h.
(do_file): Use IS_ABSOLUTE instead of testing for a literal '/'.

* src/preproc/pic/Makefile.sub (YTABH): Change pic.tab.h to
pic_tab.h.

* src/preproc/pic/lex.cc: Change pic.tab.h to pic_tab.h.

* src/preproc/eqn/Makefile.sub (YTABH): Rename eqn.tab.h to
eqn_tab.h.

* src/preproc/eqn/lex.cc: #include eqn_tab.h, not eqn.tab.h.

* src/libs/libgroff/tmpfile.cc (DEFAULT_TMPDIR) [P_tmpdir]: If
P_tmpdir is defined, use it instead of the literal "/tmp".
(remove_tmp_files, add_tmp_file): New functions.
(xtmpfile): Record temporary files and register an atexit function
to delete them explicitly, instead of relying on the OS to do
that, which doesn't work on non-Unix systems.

* src/libs/libgroff/searchpath.cc: #include nonposix.h.
(search_path::search_path): Use PATH_SEP instead of a literal
colon.
(search_path::command_line_dir): Ditto.
(search_path::open_file): Use IS_ABSOLUTE, PATH_SEP and DIR_SEPS,
to support non-Posix systems.

* src/libc/libbib/search.cc: #include nonposix.h.
(search_list::add_file): Open the file in binary mode.

* src/libs/libbib/linear.cc: #include nonposix.h.
(file_buffer::load): Remove r characters preceding n from the
loaded buffer.

* src/libs/libbib/index.cc: #include nonposix.h.
(make_index_search_item): Open index_filename in O_BINARY mode.
(index_search_item_iterator::get_tag): Ditto.  Remove r
characters before n characters.
(index_search_item::check_files): Open files in binary mode.
(index_search_item::munge_filename): Support DOS-style file names
with backslashes and drive letters, use IS_ABSOLUTE.

* src/devices/grops/ps.cc: #include nonposix.h.
(main) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grolj4/lj4.cc: #include nonposix.h.
(main) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grolbp/lbp.cc: #include nonposix.h
(fill_pattern) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grodvi/dvi.cc: #include nonposix.h.
[_MSC_VER]: Remove inclusion of Windows-specific headers (done by
nonposix.h).
(main) [SET_BINARY]: Switch stdout to binary mode.
[_MSC_VER]: Remove an explicit call to _setmode.

* src/include/nonposix.h: New file.

* Makefile.in (ENVSETUP): New variable, to set up case-sensitive
operation when building with DJGPP.
($(TARGETS), dot, $(LIBDIRS), $(CPROGDIRS), $(CCPROGDIRS))
($(DEVDIRS), $(TTYDEVDIRS), $(INCDIRS), $(OTHERDIRS)): Use
ENVSETUP.

* Makefile.comm: mv y.tab.[ch] to y_tab.[ch], to make it work on
MS-DOS.
(.man.n): Replace `;' with `|', since FONTPATH, MACROPATH,
etc. can include a semi-colon on DOS/Windows.
(depend.temp): Use depend1.temp instead of depend.temp1, to
prevent files from overerwiting each other on 8+3 filesystems.

* gendef.sh (t): Change definition to work with DOS/Windows.

doc/groff.texinfo: Apart of some typo corrections, I also changed
some index entris, to make them more non-ambiguous, and also put
@ignore around some parts that are not yet written, to allow the
Info output be readable.



From groff-commit-admin  Sun Jun 18 12:14:02 2000
Received: (from wlemb@localhost)
	by genba.ffii.org (8.9.3/8.9.3/Debian/GNU) id MAA29667;
	Sun, 18 Jun 2000 12:14:02 +0200
Date: Sun, 18 Jun 2000 12:14:02 +0200
Message-Id: <200006181014.MAA29667@genba.ffii.org>
From: wlemb@ffii.org
To: groff-commit@ffii.org
Subject: [Groff-commit] Changes to //var/cvs/groff

Log from commit: 

Update of /var/cvs/groff/src/libs/libgroff
In directory genba:/vol2/tmp/cvs-serv28889/src/libs/libgroff

Modified Files:
	font.cc searchpath.cc tmpfile.cc 
Log Message:
* src/utils/tfmtodit/tfmtodit.cc: #include nonposix.h.
(tfm::load, gf::load): Open tfm and gf files in binary mode: these
are binary files.
(main): Support non-Posix systems with several different styles of
slash characters in file names.

* src/utils/pfbtops/pfbtops.c: #include nonposix.h.
(main) [SET_BINARY]: Switch stdin into binary mode.

* src/utils/indxbib/indxbib.cc: #include nonposix.h.
(main): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.
(main) [__MSDOS__]: If renaming the temporary index file fails
because it has more than one dot in its trunk, replace the dot
with an underscore and try again.
(do_file): Use FOPEN_RB instead of "r".  Skip every CR before a
Newline.
[__MSDOS__ || _MSC_VER]: Stop at the first ^Z character.

* src/utils/hpftodit/hpftodit.cc: #include nonposix.h.
(File::File): Open the input file in binary mode.  Strip CR
characters from each CR-LF pair.
(xbasename): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.

* src/include/Makefile.sub (HDRS): Add nonposix.h.

* src/roff/troff/node.cc [HAVE_UNISTD_H]: Include <unistd.h>.
(WIFEXITED, WEXITSTATUS, WTERMSIG, WIFSTOPPED, WSTOPSIG)
[!_POSIX_VERSION]: Define for traditional Unix systems.
(real_output_file::real_output_file): Remove the MSVC-specific
call to popen, use instead POPEN_WT, appropriately defined on
nonposix.h.  #include nonposix.h.
(real_output_file::~real_output_file): Remove the MSVC-specific
call to pclose, a suitable macro is now defined on nonposix.h.
Use the portable macros WIFEXITED, WIFSIGNALED, WTERMSIG, WSTOPSIG
and WEXITSTATUS instead of assuming traditional Unix
interpretation of the status returned by pclose.

* src/roff/troff/input.cc (pipe_source): Remove the MSVC-specific
call to popen, use POPEN_RT instead (appropriately defined on
nonposix.h).  #include nonposix.h.
(ps_bbox_request): Open the PostScript file in binary mode.
Close the file after processing it.
(getpid) [_MSC_VER]: Remove; a suitable macro is now defined on
nonposix.h.

* src/roff/groff/pipeline.c (run_pipeline) [__MSDOS__ || _WIN32]:
A version of run_pipeline that doesn't use `fork'.
(signal_catcher) [__MSDOS__ || _WIN32]: New function.
(system_shell_name, system_shell_dash_c)
(is_system_shell) [__MSDOS__ || _WIN32]: New functions, to hide
the ugliness of testing DOS/Windows file names for equality, and
support both stock shells and ports of Unix shells.

* src/roff/groff/groff.cc: #include nonposix.h.
(BSHELL): Definition moved to nonposix.h.
(main): Use PATH_SEP[0] instead of literal ':'.  Use BSHELL_DASH_C
instead of a literal "-c".
(xbasename): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.
(possible_command::print): Use BSHELL_DASH_C and IS_BSHELL instead
of literal strings.

* src/preproc/soelim/soelim.cc: #include nonposix.h.
(do_file): Use IS_ABSOLUTE instead of testing for a literal '/'.

* src/preproc/pic/Makefile.sub (YTABH): Change pic.tab.h to
pic_tab.h.

* src/preproc/pic/lex.cc: Change pic.tab.h to pic_tab.h.

* src/preproc/eqn/Makefile.sub (YTABH): Rename eqn.tab.h to
eqn_tab.h.

* src/preproc/eqn/lex.cc: #include eqn_tab.h, not eqn.tab.h.

* src/libs/libgroff/tmpfile.cc (DEFAULT_TMPDIR) [P_tmpdir]: If
P_tmpdir is defined, use it instead of the literal "/tmp".
(remove_tmp_files, add_tmp_file): New functions.
(xtmpfile): Record temporary files and register an atexit function
to delete them explicitly, instead of relying on the OS to do
that, which doesn't work on non-Unix systems.

* src/libs/libgroff/searchpath.cc: #include nonposix.h.
(search_path::search_path): Use PATH_SEP instead of a literal
colon.
(search_path::command_line_dir): Ditto.
(search_path::open_file): Use IS_ABSOLUTE, PATH_SEP and DIR_SEPS,
to support non-Posix systems.

* src/libc/libbib/search.cc: #include nonposix.h.
(search_list::add_file): Open the file in binary mode.

* src/libs/libbib/linear.cc: #include nonposix.h.
(file_buffer::load): Remove r characters preceding n from the
loaded buffer.

* src/libs/libbib/index.cc: #include nonposix.h.
(make_index_search_item): Open index_filename in O_BINARY mode.
(index_search_item_iterator::get_tag): Ditto.  Remove r
characters before n characters.
(index_search_item::check_files): Open files in binary mode.
(index_search_item::munge_filename): Support DOS-style file names
with backslashes and drive letters, use IS_ABSOLUTE.

* src/devices/grops/ps.cc: #include nonposix.h.
(main) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grolj4/lj4.cc: #include nonposix.h.
(main) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grolbp/lbp.cc: #include nonposix.h
(fill_pattern) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grodvi/dvi.cc: #include nonposix.h.
[_MSC_VER]: Remove inclusion of Windows-specific headers (done by
nonposix.h).
(main) [SET_BINARY]: Switch stdout to binary mode.
[_MSC_VER]: Remove an explicit call to _setmode.

* src/include/nonposix.h: New file.

* Makefile.in (ENVSETUP): New variable, to set up case-sensitive
operation when building with DJGPP.
($(TARGETS), dot, $(LIBDIRS), $(CPROGDIRS), $(CCPROGDIRS))
($(DEVDIRS), $(TTYDEVDIRS), $(INCDIRS), $(OTHERDIRS)): Use
ENVSETUP.

* Makefile.comm: mv y.tab.[ch] to y_tab.[ch], to make it work on
MS-DOS.
(.man.n): Replace `;' with `|', since FONTPATH, MACROPATH,
etc. can include a semi-colon on DOS/Windows.
(depend.temp): Use depend1.temp instead of depend.temp1, to
prevent files from overerwiting each other on 8+3 filesystems.

* gendef.sh (t): Change definition to work with DOS/Windows.

doc/groff.texinfo: Apart of some typo corrections, I also changed
some index entris, to make them more non-ambiguous, and also put
@ignore around some parts that are not yet written, to allow the
Info output be readable.



From groff-commit-admin  Sun Jun 18 12:14:05 2000
Received: (from wlemb@localhost)
	by genba.ffii.org (8.9.3/8.9.3/Debian/GNU) id MAA29749;
	Sun, 18 Jun 2000 12:14:05 +0200
Date: Sun, 18 Jun 2000 12:14:05 +0200
Message-Id: <200006181014.MAA29749@genba.ffii.org>
From: wlemb@ffii.org
To: groff-commit@ffii.org
Subject: [Groff-commit] Changes to //var/cvs/groff

Log from commit: 

Update of /var/cvs/groff/src/preproc/eqn
In directory genba:/vol2/tmp/cvs-serv28889/src/preproc/eqn

Modified Files:
	Makefile.sub lex.cc 
Added Files:
	eqn_tab.h 
Removed Files:
	eqn.tab.h 
Log Message:
* src/utils/tfmtodit/tfmtodit.cc: #include nonposix.h.
(tfm::load, gf::load): Open tfm and gf files in binary mode: these
are binary files.
(main): Support non-Posix systems with several different styles of
slash characters in file names.

* src/utils/pfbtops/pfbtops.c: #include nonposix.h.
(main) [SET_BINARY]: Switch stdin into binary mode.

* src/utils/indxbib/indxbib.cc: #include nonposix.h.
(main): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.
(main) [__MSDOS__]: If renaming the temporary index file fails
because it has more than one dot in its trunk, replace the dot
with an underscore and try again.
(do_file): Use FOPEN_RB instead of "r".  Skip every CR before a
Newline.
[__MSDOS__ || _MSC_VER]: Stop at the first ^Z character.

* src/utils/hpftodit/hpftodit.cc: #include nonposix.h.
(File::File): Open the input file in binary mode.  Strip CR
characters from each CR-LF pair.
(xbasename): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.

* src/include/Makefile.sub (HDRS): Add nonposix.h.

* src/roff/troff/node.cc [HAVE_UNISTD_H]: Include <unistd.h>.
(WIFEXITED, WEXITSTATUS, WTERMSIG, WIFSTOPPED, WSTOPSIG)
[!_POSIX_VERSION]: Define for traditional Unix systems.
(real_output_file::real_output_file): Remove the MSVC-specific
call to popen, use instead POPEN_WT, appropriately defined on
nonposix.h.  #include nonposix.h.
(real_output_file::~real_output_file): Remove the MSVC-specific
call to pclose, a suitable macro is now defined on nonposix.h.
Use the portable macros WIFEXITED, WIFSIGNALED, WTERMSIG, WSTOPSIG
and WEXITSTATUS instead of assuming traditional Unix
interpretation of the status returned by pclose.

* src/roff/troff/input.cc (pipe_source): Remove the MSVC-specific
call to popen, use POPEN_RT instead (appropriately defined on
nonposix.h).  #include nonposix.h.
(ps_bbox_request): Open the PostScript file in binary mode.
Close the file after processing it.
(getpid) [_MSC_VER]: Remove; a suitable macro is now defined on
nonposix.h.

* src/roff/groff/pipeline.c (run_pipeline) [__MSDOS__ || _WIN32]:
A version of run_pipeline that doesn't use `fork'.
(signal_catcher) [__MSDOS__ || _WIN32]: New function.
(system_shell_name, system_shell_dash_c)
(is_system_shell) [__MSDOS__ || _WIN32]: New functions, to hide
the ugliness of testing DOS/Windows file names for equality, and
support both stock shells and ports of Unix shells.

* src/roff/groff/groff.cc: #include nonposix.h.
(BSHELL): Definition moved to nonposix.h.
(main): Use PATH_SEP[0] instead of literal ':'.  Use BSHELL_DASH_C
instead of a literal "-c".
(xbasename): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.
(possible_command::print): Use BSHELL_DASH_C and IS_BSHELL instead
of literal strings.

* src/preproc/soelim/soelim.cc: #include nonposix.h.
(do_file): Use IS_ABSOLUTE instead of testing for a literal '/'.

* src/preproc/pic/Makefile.sub (YTABH): Change pic.tab.h to
pic_tab.h.

* src/preproc/pic/lex.cc: Change pic.tab.h to pic_tab.h.

* src/preproc/eqn/Makefile.sub (YTABH): Rename eqn.tab.h to
eqn_tab.h.

* src/preproc/eqn/lex.cc: #include eqn_tab.h, not eqn.tab.h.

* src/libs/libgroff/tmpfile.cc (DEFAULT_TMPDIR) [P_tmpdir]: If
P_tmpdir is defined, use it instead of the literal "/tmp".
(remove_tmp_files, add_tmp_file): New functions.
(xtmpfile): Record temporary files and register an atexit function
to delete them explicitly, instead of relying on the OS to do
that, which doesn't work on non-Unix systems.

* src/libs/libgroff/searchpath.cc: #include nonposix.h.
(search_path::search_path): Use PATH_SEP instead of a literal
colon.
(search_path::command_line_dir): Ditto.
(search_path::open_file): Use IS_ABSOLUTE, PATH_SEP and DIR_SEPS,
to support non-Posix systems.

* src/libc/libbib/search.cc: #include nonposix.h.
(search_list::add_file): Open the file in binary mode.

* src/libs/libbib/linear.cc: #include nonposix.h.
(file_buffer::load): Remove r characters preceding n from the
loaded buffer.

* src/libs/libbib/index.cc: #include nonposix.h.
(make_index_search_item): Open index_filename in O_BINARY mode.
(index_search_item_iterator::get_tag): Ditto.  Remove r
characters before n characters.
(index_search_item::check_files): Open files in binary mode.
(index_search_item::munge_filename): Support DOS-style file names
with backslashes and drive letters, use IS_ABSOLUTE.

* src/devices/grops/ps.cc: #include nonposix.h.
(main) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grolj4/lj4.cc: #include nonposix.h.
(main) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grolbp/lbp.cc: #include nonposix.h
(fill_pattern) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grodvi/dvi.cc: #include nonposix.h.
[_MSC_VER]: Remove inclusion of Windows-specific headers (done by
nonposix.h).
(main) [SET_BINARY]: Switch stdout to binary mode.
[_MSC_VER]: Remove an explicit call to _setmode.

* src/include/nonposix.h: New file.

* Makefile.in (ENVSETUP): New variable, to set up case-sensitive
operation when building with DJGPP.
($(TARGETS), dot, $(LIBDIRS), $(CPROGDIRS), $(CCPROGDIRS))
($(DEVDIRS), $(TTYDEVDIRS), $(INCDIRS), $(OTHERDIRS)): Use
ENVSETUP.

* Makefile.comm: mv y.tab.[ch] to y_tab.[ch], to make it work on
MS-DOS.
(.man.n): Replace `;' with `|', since FONTPATH, MACROPATH,
etc. can include a semi-colon on DOS/Windows.
(depend.temp): Use depend1.temp instead of depend.temp1, to
prevent files from overerwiting each other on 8+3 filesystems.

* gendef.sh (t): Change definition to work with DOS/Windows.

doc/groff.texinfo: Apart of some typo corrections, I also changed
some index entris, to make them more non-ambiguous, and also put
@ignore around some parts that are not yet written, to allow the
Info output be readable.



From groff-commit-admin  Sun Jun 18 12:14:06 2000
Received: (from wlemb@localhost)
	by genba.ffii.org (8.9.3/8.9.3/Debian/GNU) id MAA29823;
	Sun, 18 Jun 2000 12:14:06 +0200
Date: Sun, 18 Jun 2000 12:14:06 +0200
Message-Id: <200006181014.MAA29823@genba.ffii.org>
From: wlemb@ffii.org
To: groff-commit@ffii.org
Subject: [Groff-commit] Changes to //var/cvs/groff

Log from commit: 

Update of /var/cvs/groff/src/preproc/pic
In directory genba:/vol2/tmp/cvs-serv28889/src/preproc/pic

Modified Files:
	Makefile.sub lex.cc 
Added Files:
	pic_tab.h 
Removed Files:
	pic.tab.h 
Log Message:
* src/utils/tfmtodit/tfmtodit.cc: #include nonposix.h.
(tfm::load, gf::load): Open tfm and gf files in binary mode: these
are binary files.
(main): Support non-Posix systems with several different styles of
slash characters in file names.

* src/utils/pfbtops/pfbtops.c: #include nonposix.h.
(main) [SET_BINARY]: Switch stdin into binary mode.

* src/utils/indxbib/indxbib.cc: #include nonposix.h.
(main): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.
(main) [__MSDOS__]: If renaming the temporary index file fails
because it has more than one dot in its trunk, replace the dot
with an underscore and try again.
(do_file): Use FOPEN_RB instead of "r".  Skip every CR before a
Newline.
[__MSDOS__ || _MSC_VER]: Stop at the first ^Z character.

* src/utils/hpftodit/hpftodit.cc: #include nonposix.h.
(File::File): Open the input file in binary mode.  Strip CR
characters from each CR-LF pair.
(xbasename): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.

* src/include/Makefile.sub (HDRS): Add nonposix.h.

* src/roff/troff/node.cc [HAVE_UNISTD_H]: Include <unistd.h>.
(WIFEXITED, WEXITSTATUS, WTERMSIG, WIFSTOPPED, WSTOPSIG)
[!_POSIX_VERSION]: Define for traditional Unix systems.
(real_output_file::real_output_file): Remove the MSVC-specific
call to popen, use instead POPEN_WT, appropriately defined on
nonposix.h.  #include nonposix.h.
(real_output_file::~real_output_file): Remove the MSVC-specific
call to pclose, a suitable macro is now defined on nonposix.h.
Use the portable macros WIFEXITED, WIFSIGNALED, WTERMSIG, WSTOPSIG
and WEXITSTATUS instead of assuming traditional Unix
interpretation of the status returned by pclose.

* src/roff/troff/input.cc (pipe_source): Remove the MSVC-specific
call to popen, use POPEN_RT instead (appropriately defined on
nonposix.h).  #include nonposix.h.
(ps_bbox_request): Open the PostScript file in binary mode.
Close the file after processing it.
(getpid) [_MSC_VER]: Remove; a suitable macro is now defined on
nonposix.h.

* src/roff/groff/pipeline.c (run_pipeline) [__MSDOS__ || _WIN32]:
A version of run_pipeline that doesn't use `fork'.
(signal_catcher) [__MSDOS__ || _WIN32]: New function.
(system_shell_name, system_shell_dash_c)
(is_system_shell) [__MSDOS__ || _WIN32]: New functions, to hide
the ugliness of testing DOS/Windows file names for equality, and
support both stock shells and ports of Unix shells.

* src/roff/groff/groff.cc: #include nonposix.h.
(BSHELL): Definition moved to nonposix.h.
(main): Use PATH_SEP[0] instead of literal ':'.  Use BSHELL_DASH_C
instead of a literal "-c".
(xbasename): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.
(possible_command::print): Use BSHELL_DASH_C and IS_BSHELL instead
of literal strings.

* src/preproc/soelim/soelim.cc: #include nonposix.h.
(do_file): Use IS_ABSOLUTE instead of testing for a literal '/'.

* src/preproc/pic/Makefile.sub (YTABH): Change pic.tab.h to
pic_tab.h.

* src/preproc/pic/lex.cc: Change pic.tab.h to pic_tab.h.

* src/preproc/eqn/Makefile.sub (YTABH): Rename eqn.tab.h to
eqn_tab.h.

* src/preproc/eqn/lex.cc: #include eqn_tab.h, not eqn.tab.h.

* src/libs/libgroff/tmpfile.cc (DEFAULT_TMPDIR) [P_tmpdir]: If
P_tmpdir is defined, use it instead of the literal "/tmp".
(remove_tmp_files, add_tmp_file): New functions.
(xtmpfile): Record temporary files and register an atexit function
to delete them explicitly, instead of relying on the OS to do
that, which doesn't work on non-Unix systems.

* src/libs/libgroff/searchpath.cc: #include nonposix.h.
(search_path::search_path): Use PATH_SEP instead of a literal
colon.
(search_path::command_line_dir): Ditto.
(search_path::open_file): Use IS_ABSOLUTE, PATH_SEP and DIR_SEPS,
to support non-Posix systems.

* src/libc/libbib/search.cc: #include nonposix.h.
(search_list::add_file): Open the file in binary mode.

* src/libs/libbib/linear.cc: #include nonposix.h.
(file_buffer::load): Remove r characters preceding n from the
loaded buffer.

* src/libs/libbib/index.cc: #include nonposix.h.
(make_index_search_item): Open index_filename in O_BINARY mode.
(index_search_item_iterator::get_tag): Ditto.  Remove r
characters before n characters.
(index_search_item::check_files): Open files in binary mode.
(index_search_item::munge_filename): Support DOS-style file names
with backslashes and drive letters, use IS_ABSOLUTE.

* src/devices/grops/ps.cc: #include nonposix.h.
(main) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grolj4/lj4.cc: #include nonposix.h.
(main) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grolbp/lbp.cc: #include nonposix.h
(fill_pattern) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grodvi/dvi.cc: #include nonposix.h.
[_MSC_VER]: Remove inclusion of Windows-specific headers (done by
nonposix.h).
(main) [SET_BINARY]: Switch stdout to binary mode.
[_MSC_VER]: Remove an explicit call to _setmode.

* src/include/nonposix.h: New file.

* Makefile.in (ENVSETUP): New variable, to set up case-sensitive
operation when building with DJGPP.
($(TARGETS), dot, $(LIBDIRS), $(CPROGDIRS), $(CCPROGDIRS))
($(DEVDIRS), $(TTYDEVDIRS), $(INCDIRS), $(OTHERDIRS)): Use
ENVSETUP.

* Makefile.comm: mv y.tab.[ch] to y_tab.[ch], to make it work on
MS-DOS.
(.man.n): Replace `;' with `|', since FONTPATH, MACROPATH,
etc. can include a semi-colon on DOS/Windows.
(depend.temp): Use depend1.temp instead of depend.temp1, to
prevent files from overerwiting each other on 8+3 filesystems.

* gendef.sh (t): Change definition to work with DOS/Windows.

doc/groff.texinfo: Apart of some typo corrections, I also changed
some index entris, to make them more non-ambiguous, and also put
@ignore around some parts that are not yet written, to allow the
Info output be readable.



From groff-commit-admin  Sun Jun 18 12:14:08 2000
Received: (from wlemb@localhost)
	by genba.ffii.org (8.9.3/8.9.3/Debian/GNU) id MAA29866;
	Sun, 18 Jun 2000 12:14:08 +0200
Date: Sun, 18 Jun 2000 12:14:08 +0200
Message-Id: <200006181014.MAA29866@genba.ffii.org>
From: wlemb@ffii.org
To: groff-commit@ffii.org
Subject: [Groff-commit] Changes to //var/cvs/groff

Log from commit: 

Update of /var/cvs/groff/src/preproc/soelim
In directory genba:/vol2/tmp/cvs-serv28889/src/preproc/soelim

Modified Files:
	soelim.cc 
Log Message:
* src/utils/tfmtodit/tfmtodit.cc: #include nonposix.h.
(tfm::load, gf::load): Open tfm and gf files in binary mode: these
are binary files.
(main): Support non-Posix systems with several different styles of
slash characters in file names.

* src/utils/pfbtops/pfbtops.c: #include nonposix.h.
(main) [SET_BINARY]: Switch stdin into binary mode.

* src/utils/indxbib/indxbib.cc: #include nonposix.h.
(main): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.
(main) [__MSDOS__]: If renaming the temporary index file fails
because it has more than one dot in its trunk, replace the dot
with an underscore and try again.
(do_file): Use FOPEN_RB instead of "r".  Skip every CR before a
Newline.
[__MSDOS__ || _MSC_VER]: Stop at the first ^Z character.

* src/utils/hpftodit/hpftodit.cc: #include nonposix.h.
(File::File): Open the input file in binary mode.  Strip CR
characters from each CR-LF pair.
(xbasename): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.

* src/include/Makefile.sub (HDRS): Add nonposix.h.

* src/roff/troff/node.cc [HAVE_UNISTD_H]: Include <unistd.h>.
(WIFEXITED, WEXITSTATUS, WTERMSIG, WIFSTOPPED, WSTOPSIG)
[!_POSIX_VERSION]: Define for traditional Unix systems.
(real_output_file::real_output_file): Remove the MSVC-specific
call to popen, use instead POPEN_WT, appropriately defined on
nonposix.h.  #include nonposix.h.
(real_output_file::~real_output_file): Remove the MSVC-specific
call to pclose, a suitable macro is now defined on nonposix.h.
Use the portable macros WIFEXITED, WIFSIGNALED, WTERMSIG, WSTOPSIG
and WEXITSTATUS instead of assuming traditional Unix
interpretation of the status returned by pclose.

* src/roff/troff/input.cc (pipe_source): Remove the MSVC-specific
call to popen, use POPEN_RT instead (appropriately defined on
nonposix.h).  #include nonposix.h.
(ps_bbox_request): Open the PostScript file in binary mode.
Close the file after processing it.
(getpid) [_MSC_VER]: Remove; a suitable macro is now defined on
nonposix.h.

* src/roff/groff/pipeline.c (run_pipeline) [__MSDOS__ || _WIN32]:
A version of run_pipeline that doesn't use `fork'.
(signal_catcher) [__MSDOS__ || _WIN32]: New function.
(system_shell_name, system_shell_dash_c)
(is_system_shell) [__MSDOS__ || _WIN32]: New functions, to hide
the ugliness of testing DOS/Windows file names for equality, and
support both stock shells and ports of Unix shells.

* src/roff/groff/groff.cc: #include nonposix.h.
(BSHELL): Definition moved to nonposix.h.
(main): Use PATH_SEP[0] instead of literal ':'.  Use BSHELL_DASH_C
instead of a literal "-c".
(xbasename): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.
(possible_command::print): Use BSHELL_DASH_C and IS_BSHELL instead
of literal strings.

* src/preproc/soelim/soelim.cc: #include nonposix.h.
(do_file): Use IS_ABSOLUTE instead of testing for a literal '/'.

* src/preproc/pic/Makefile.sub (YTABH): Change pic.tab.h to
pic_tab.h.

* src/preproc/pic/lex.cc: Change pic.tab.h to pic_tab.h.

* src/preproc/eqn/Makefile.sub (YTABH): Rename eqn.tab.h to
eqn_tab.h.

* src/preproc/eqn/lex.cc: #include eqn_tab.h, not eqn.tab.h.

* src/libs/libgroff/tmpfile.cc (DEFAULT_TMPDIR) [P_tmpdir]: If
P_tmpdir is defined, use it instead of the literal "/tmp".
(remove_tmp_files, add_tmp_file): New functions.
(xtmpfile): Record temporary files and register an atexit function
to delete them explicitly, instead of relying on the OS to do
that, which doesn't work on non-Unix systems.

* src/libs/libgroff/searchpath.cc: #include nonposix.h.
(search_path::search_path): Use PATH_SEP instead of a literal
colon.
(search_path::command_line_dir): Ditto.
(search_path::open_file): Use IS_ABSOLUTE, PATH_SEP and DIR_SEPS,
to support non-Posix systems.

* src/libc/libbib/search.cc: #include nonposix.h.
(search_list::add_file): Open the file in binary mode.

* src/libs/libbib/linear.cc: #include nonposix.h.
(file_buffer::load): Remove r characters preceding n from the
loaded buffer.

* src/libs/libbib/index.cc: #include nonposix.h.
(make_index_search_item): Open index_filename in O_BINARY mode.
(index_search_item_iterator::get_tag): Ditto.  Remove r
characters before n characters.
(index_search_item::check_files): Open files in binary mode.
(index_search_item::munge_filename): Support DOS-style file names
with backslashes and drive letters, use IS_ABSOLUTE.

* src/devices/grops/ps.cc: #include nonposix.h.
(main) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grolj4/lj4.cc: #include nonposix.h.
(main) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grolbp/lbp.cc: #include nonposix.h
(fill_pattern) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grodvi/dvi.cc: #include nonposix.h.
[_MSC_VER]: Remove inclusion of Windows-specific headers (done by
nonposix.h).
(main) [SET_BINARY]: Switch stdout to binary mode.
[_MSC_VER]: Remove an explicit call to _setmode.

* src/include/nonposix.h: New file.

* Makefile.in (ENVSETUP): New variable, to set up case-sensitive
operation when building with DJGPP.
($(TARGETS), dot, $(LIBDIRS), $(CPROGDIRS), $(CCPROGDIRS))
($(DEVDIRS), $(TTYDEVDIRS), $(INCDIRS), $(OTHERDIRS)): Use
ENVSETUP.

* Makefile.comm: mv y.tab.[ch] to y_tab.[ch], to make it work on
MS-DOS.
(.man.n): Replace `;' with `|', since FONTPATH, MACROPATH,
etc. can include a semi-colon on DOS/Windows.
(depend.temp): Use depend1.temp instead of depend.temp1, to
prevent files from overerwiting each other on 8+3 filesystems.

* gendef.sh (t): Change definition to work with DOS/Windows.

doc/groff.texinfo: Apart of some typo corrections, I also changed
some index entris, to make them more non-ambiguous, and also put
@ignore around some parts that are not yet written, to allow the
Info output be readable.



From groff-commit-admin  Sun Jun 18 12:14:09 2000
Received: (from wlemb@localhost)
	by genba.ffii.org (8.9.3/8.9.3/Debian/GNU) id MAA29918;
	Sun, 18 Jun 2000 12:14:09 +0200
Date: Sun, 18 Jun 2000 12:14:09 +0200
Message-Id: <200006181014.MAA29918@genba.ffii.org>
From: wlemb@ffii.org
To: groff-commit@ffii.org
Subject: [Groff-commit] Changes to //var/cvs/groff

Log from commit: 

Update of /var/cvs/groff/src/roff/groff
In directory genba:/vol2/tmp/cvs-serv28889/src/roff/groff

Modified Files:
	groff.cc pipeline.c 
Log Message:
* src/utils/tfmtodit/tfmtodit.cc: #include nonposix.h.
(tfm::load, gf::load): Open tfm and gf files in binary mode: these
are binary files.
(main): Support non-Posix systems with several different styles of
slash characters in file names.

* src/utils/pfbtops/pfbtops.c: #include nonposix.h.
(main) [SET_BINARY]: Switch stdin into binary mode.

* src/utils/indxbib/indxbib.cc: #include nonposix.h.
(main): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.
(main) [__MSDOS__]: If renaming the temporary index file fails
because it has more than one dot in its trunk, replace the dot
with an underscore and try again.
(do_file): Use FOPEN_RB instead of "r".  Skip every CR before a
Newline.
[__MSDOS__ || _MSC_VER]: Stop at the first ^Z character.

* src/utils/hpftodit/hpftodit.cc: #include nonposix.h.
(File::File): Open the input file in binary mode.  Strip CR
characters from each CR-LF pair.
(xbasename): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.

* src/include/Makefile.sub (HDRS): Add nonposix.h.

* src/roff/troff/node.cc [HAVE_UNISTD_H]: Include <unistd.h>.
(WIFEXITED, WEXITSTATUS, WTERMSIG, WIFSTOPPED, WSTOPSIG)
[!_POSIX_VERSION]: Define for traditional Unix systems.
(real_output_file::real_output_file): Remove the MSVC-specific
call to popen, use instead POPEN_WT, appropriately defined on
nonposix.h.  #include nonposix.h.
(real_output_file::~real_output_file): Remove the MSVC-specific
call to pclose, a suitable macro is now defined on nonposix.h.
Use the portable macros WIFEXITED, WIFSIGNALED, WTERMSIG, WSTOPSIG
and WEXITSTATUS instead of assuming traditional Unix
interpretation of the status returned by pclose.

* src/roff/troff/input.cc (pipe_source): Remove the MSVC-specific
call to popen, use POPEN_RT instead (appropriately defined on
nonposix.h).  #include nonposix.h.
(ps_bbox_request): Open the PostScript file in binary mode.
Close the file after processing it.
(getpid) [_MSC_VER]: Remove; a suitable macro is now defined on
nonposix.h.

* src/roff/groff/pipeline.c (run_pipeline) [__MSDOS__ || _WIN32]:
A version of run_pipeline that doesn't use `fork'.
(signal_catcher) [__MSDOS__ || _WIN32]: New function.
(system_shell_name, system_shell_dash_c)
(is_system_shell) [__MSDOS__ || _WIN32]: New functions, to hide
the ugliness of testing DOS/Windows file names for equality, and
support both stock shells and ports of Unix shells.

* src/roff/groff/groff.cc: #include nonposix.h.
(BSHELL): Definition moved to nonposix.h.
(main): Use PATH_SEP[0] instead of literal ':'.  Use BSHELL_DASH_C
instead of a literal "-c".
(xbasename): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.
(possible_command::print): Use BSHELL_DASH_C and IS_BSHELL instead
of literal strings.

* src/preproc/soelim/soelim.cc: #include nonposix.h.
(do_file): Use IS_ABSOLUTE instead of testing for a literal '/'.

* src/preproc/pic/Makefile.sub (YTABH): Change pic.tab.h to
pic_tab.h.

* src/preproc/pic/lex.cc: Change pic.tab.h to pic_tab.h.

* src/preproc/eqn/Makefile.sub (YTABH): Rename eqn.tab.h to
eqn_tab.h.

* src/preproc/eqn/lex.cc: #include eqn_tab.h, not eqn.tab.h.

* src/libs/libgroff/tmpfile.cc (DEFAULT_TMPDIR) [P_tmpdir]: If
P_tmpdir is defined, use it instead of the literal "/tmp".
(remove_tmp_files, add_tmp_file): New functions.
(xtmpfile): Record temporary files and register an atexit function
to delete them explicitly, instead of relying on the OS to do
that, which doesn't work on non-Unix systems.

* src/libs/libgroff/searchpath.cc: #include nonposix.h.
(search_path::search_path): Use PATH_SEP instead of a literal
colon.
(search_path::command_line_dir): Ditto.
(search_path::open_file): Use IS_ABSOLUTE, PATH_SEP and DIR_SEPS,
to support non-Posix systems.

* src/libc/libbib/search.cc: #include nonposix.h.
(search_list::add_file): Open the file in binary mode.

* src/libs/libbib/linear.cc: #include nonposix.h.
(file_buffer::load): Remove r characters preceding n from the
loaded buffer.

* src/libs/libbib/index.cc: #include nonposix.h.
(make_index_search_item): Open index_filename in O_BINARY mode.
(index_search_item_iterator::get_tag): Ditto.  Remove r
characters before n characters.
(index_search_item::check_files): Open files in binary mode.
(index_search_item::munge_filename): Support DOS-style file names
with backslashes and drive letters, use IS_ABSOLUTE.

* src/devices/grops/ps.cc: #include nonposix.h.
(main) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grolj4/lj4.cc: #include nonposix.h.
(main) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grolbp/lbp.cc: #include nonposix.h
(fill_pattern) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grodvi/dvi.cc: #include nonposix.h.
[_MSC_VER]: Remove inclusion of Windows-specific headers (done by
nonposix.h).
(main) [SET_BINARY]: Switch stdout to binary mode.
[_MSC_VER]: Remove an explicit call to _setmode.

* src/include/nonposix.h: New file.

* Makefile.in (ENVSETUP): New variable, to set up case-sensitive
operation when building with DJGPP.
($(TARGETS), dot, $(LIBDIRS), $(CPROGDIRS), $(CCPROGDIRS))
($(DEVDIRS), $(TTYDEVDIRS), $(INCDIRS), $(OTHERDIRS)): Use
ENVSETUP.

* Makefile.comm: mv y.tab.[ch] to y_tab.[ch], to make it work on
MS-DOS.
(.man.n): Replace `;' with `|', since FONTPATH, MACROPATH,
etc. can include a semi-colon on DOS/Windows.
(depend.temp): Use depend1.temp instead of depend.temp1, to
prevent files from overerwiting each other on 8+3 filesystems.

* gendef.sh (t): Change definition to work with DOS/Windows.

doc/groff.texinfo: Apart of some typo corrections, I also changed
some index entris, to make them more non-ambiguous, and also put
@ignore around some parts that are not yet written, to allow the
Info output be readable.



From groff-commit-admin  Sun Jun 18 12:14:11 2000
Received: (from wlemb@localhost)
	by genba.ffii.org (8.9.3/8.9.3/Debian/GNU) id MAA29978;
	Sun, 18 Jun 2000 12:14:11 +0200
Date: Sun, 18 Jun 2000 12:14:11 +0200
Message-Id: <200006181014.MAA29978@genba.ffii.org>
From: wlemb@ffii.org
To: groff-commit@ffii.org
Subject: [Groff-commit] Changes to //var/cvs/groff

Log from commit: 

Update of /var/cvs/groff/src/roff/troff
In directory genba:/vol2/tmp/cvs-serv28889/src/roff/troff

Modified Files:
	input.cc node.cc 
Log Message:
* src/utils/tfmtodit/tfmtodit.cc: #include nonposix.h.
(tfm::load, gf::load): Open tfm and gf files in binary mode: these
are binary files.
(main): Support non-Posix systems with several different styles of
slash characters in file names.

* src/utils/pfbtops/pfbtops.c: #include nonposix.h.
(main) [SET_BINARY]: Switch stdin into binary mode.

* src/utils/indxbib/indxbib.cc: #include nonposix.h.
(main): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.
(main) [__MSDOS__]: If renaming the temporary index file fails
because it has more than one dot in its trunk, replace the dot
with an underscore and try again.
(do_file): Use FOPEN_RB instead of "r".  Skip every CR before a
Newline.
[__MSDOS__ || _MSC_VER]: Stop at the first ^Z character.

* src/utils/hpftodit/hpftodit.cc: #include nonposix.h.
(File::File): Open the input file in binary mode.  Strip CR
characters from each CR-LF pair.
(xbasename): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.

* src/include/Makefile.sub (HDRS): Add nonposix.h.

* src/roff/troff/node.cc [HAVE_UNISTD_H]: Include <unistd.h>.
(WIFEXITED, WEXITSTATUS, WTERMSIG, WIFSTOPPED, WSTOPSIG)
[!_POSIX_VERSION]: Define for traditional Unix systems.
(real_output_file::real_output_file): Remove the MSVC-specific
call to popen, use instead POPEN_WT, appropriately defined on
nonposix.h.  #include nonposix.h.
(real_output_file::~real_output_file): Remove the MSVC-specific
call to pclose, a suitable macro is now defined on nonposix.h.
Use the portable macros WIFEXITED, WIFSIGNALED, WTERMSIG, WSTOPSIG
and WEXITSTATUS instead of assuming traditional Unix
interpretation of the status returned by pclose.

* src/roff/troff/input.cc (pipe_source): Remove the MSVC-specific
call to popen, use POPEN_RT instead (appropriately defined on
nonposix.h).  #include nonposix.h.
(ps_bbox_request): Open the PostScript file in binary mode.
Close the file after processing it.
(getpid) [_MSC_VER]: Remove; a suitable macro is now defined on
nonposix.h.

* src/roff/groff/pipeline.c (run_pipeline) [__MSDOS__ || _WIN32]:
A version of run_pipeline that doesn't use `fork'.
(signal_catcher) [__MSDOS__ || _WIN32]: New function.
(system_shell_name, system_shell_dash_c)
(is_system_shell) [__MSDOS__ || _WIN32]: New functions, to hide
the ugliness of testing DOS/Windows file names for equality, and
support both stock shells and ports of Unix shells.

* src/roff/groff/groff.cc: #include nonposix.h.
(BSHELL): Definition moved to nonposix.h.
(main): Use PATH_SEP[0] instead of literal ':'.  Use BSHELL_DASH_C
instead of a literal "-c".
(xbasename): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.
(possible_command::print): Use BSHELL_DASH_C and IS_BSHELL instead
of literal strings.

* src/preproc/soelim/soelim.cc: #include nonposix.h.
(do_file): Use IS_ABSOLUTE instead of testing for a literal '/'.

* src/preproc/pic/Makefile.sub (YTABH): Change pic.tab.h to
pic_tab.h.

* src/preproc/pic/lex.cc: Change pic.tab.h to pic_tab.h.

* src/preproc/eqn/Makefile.sub (YTABH): Rename eqn.tab.h to
eqn_tab.h.

* src/preproc/eqn/lex.cc: #include eqn_tab.h, not eqn.tab.h.

* src/libs/libgroff/tmpfile.cc (DEFAULT_TMPDIR) [P_tmpdir]: If
P_tmpdir is defined, use it instead of the literal "/tmp".
(remove_tmp_files, add_tmp_file): New functions.
(xtmpfile): Record temporary files and register an atexit function
to delete them explicitly, instead of relying on the OS to do
that, which doesn't work on non-Unix systems.

* src/libs/libgroff/searchpath.cc: #include nonposix.h.
(search_path::search_path): Use PATH_SEP instead of a literal
colon.
(search_path::command_line_dir): Ditto.
(search_path::open_file): Use IS_ABSOLUTE, PATH_SEP and DIR_SEPS,
to support non-Posix systems.

* src/libc/libbib/search.cc: #include nonposix.h.
(search_list::add_file): Open the file in binary mode.

* src/libs/libbib/linear.cc: #include nonposix.h.
(file_buffer::load): Remove r characters preceding n from the
loaded buffer.

* src/libs/libbib/index.cc: #include nonposix.h.
(make_index_search_item): Open index_filename in O_BINARY mode.
(index_search_item_iterator::get_tag): Ditto.  Remove r
characters before n characters.
(index_search_item::check_files): Open files in binary mode.
(index_search_item::munge_filename): Support DOS-style file names
with backslashes and drive letters, use IS_ABSOLUTE.

* src/devices/grops/ps.cc: #include nonposix.h.
(main) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grolj4/lj4.cc: #include nonposix.h.
(main) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grolbp/lbp.cc: #include nonposix.h
(fill_pattern) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grodvi/dvi.cc: #include nonposix.h.
[_MSC_VER]: Remove inclusion of Windows-specific headers (done by
nonposix.h).
(main) [SET_BINARY]: Switch stdout to binary mode.
[_MSC_VER]: Remove an explicit call to _setmode.

* src/include/nonposix.h: New file.

* Makefile.in (ENVSETUP): New variable, to set up case-sensitive
operation when building with DJGPP.
($(TARGETS), dot, $(LIBDIRS), $(CPROGDIRS), $(CCPROGDIRS))
($(DEVDIRS), $(TTYDEVDIRS), $(INCDIRS), $(OTHERDIRS)): Use
ENVSETUP.

* Makefile.comm: mv y.tab.[ch] to y_tab.[ch], to make it work on
MS-DOS.
(.man.n): Replace `;' with `|', since FONTPATH, MACROPATH,
etc. can include a semi-colon on DOS/Windows.
(depend.temp): Use depend1.temp instead of depend.temp1, to
prevent files from overerwiting each other on 8+3 filesystems.

* gendef.sh (t): Change definition to work with DOS/Windows.

doc/groff.texinfo: Apart of some typo corrections, I also changed
some index entris, to make them more non-ambiguous, and also put
@ignore around some parts that are not yet written, to allow the
Info output be readable.



From groff-commit-admin  Sun Jun 18 12:14:13 2000
Received: (from wlemb@localhost)
	by genba.ffii.org (8.9.3/8.9.3/Debian/GNU) id MAA30022;
	Sun, 18 Jun 2000 12:14:13 +0200
Date: Sun, 18 Jun 2000 12:14:13 +0200
Message-Id: <200006181014.MAA30022@genba.ffii.org>
From: wlemb@ffii.org
To: groff-commit@ffii.org
Subject: [Groff-commit] Changes to //var/cvs/groff

Log from commit: 

Update of /var/cvs/groff/src/utils/hpftodit
In directory genba:/vol2/tmp/cvs-serv28889/src/utils/hpftodit

Modified Files:
	hpftodit.cc 
Log Message:
* src/utils/tfmtodit/tfmtodit.cc: #include nonposix.h.
(tfm::load, gf::load): Open tfm and gf files in binary mode: these
are binary files.
(main): Support non-Posix systems with several different styles of
slash characters in file names.

* src/utils/pfbtops/pfbtops.c: #include nonposix.h.
(main) [SET_BINARY]: Switch stdin into binary mode.

* src/utils/indxbib/indxbib.cc: #include nonposix.h.
(main): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.
(main) [__MSDOS__]: If renaming the temporary index file fails
because it has more than one dot in its trunk, replace the dot
with an underscore and try again.
(do_file): Use FOPEN_RB instead of "r".  Skip every CR before a
Newline.
[__MSDOS__ || _MSC_VER]: Stop at the first ^Z character.

* src/utils/hpftodit/hpftodit.cc: #include nonposix.h.
(File::File): Open the input file in binary mode.  Strip CR
characters from each CR-LF pair.
(xbasename): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.

* src/include/Makefile.sub (HDRS): Add nonposix.h.

* src/roff/troff/node.cc [HAVE_UNISTD_H]: Include <unistd.h>.
(WIFEXITED, WEXITSTATUS, WTERMSIG, WIFSTOPPED, WSTOPSIG)
[!_POSIX_VERSION]: Define for traditional Unix systems.
(real_output_file::real_output_file): Remove the MSVC-specific
call to popen, use instead POPEN_WT, appropriately defined on
nonposix.h.  #include nonposix.h.
(real_output_file::~real_output_file): Remove the MSVC-specific
call to pclose, a suitable macro is now defined on nonposix.h.
Use the portable macros WIFEXITED, WIFSIGNALED, WTERMSIG, WSTOPSIG
and WEXITSTATUS instead of assuming traditional Unix
interpretation of the status returned by pclose.

* src/roff/troff/input.cc (pipe_source): Remove the MSVC-specific
call to popen, use POPEN_RT instead (appropriately defined on
nonposix.h).  #include nonposix.h.
(ps_bbox_request): Open the PostScript file in binary mode.
Close the file after processing it.
(getpid) [_MSC_VER]: Remove; a suitable macro is now defined on
nonposix.h.

* src/roff/groff/pipeline.c (run_pipeline) [__MSDOS__ || _WIN32]:
A version of run_pipeline that doesn't use `fork'.
(signal_catcher) [__MSDOS__ || _WIN32]: New function.
(system_shell_name, system_shell_dash_c)
(is_system_shell) [__MSDOS__ || _WIN32]: New functions, to hide
the ugliness of testing DOS/Windows file names for equality, and
support both stock shells and ports of Unix shells.

* src/roff/groff/groff.cc: #include nonposix.h.
(BSHELL): Definition moved to nonposix.h.
(main): Use PATH_SEP[0] instead of literal ':'.  Use BSHELL_DASH_C
instead of a literal "-c".
(xbasename): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.
(possible_command::print): Use BSHELL_DASH_C and IS_BSHELL instead
of literal strings.

* src/preproc/soelim/soelim.cc: #include nonposix.h.
(do_file): Use IS_ABSOLUTE instead of testing for a literal '/'.

* src/preproc/pic/Makefile.sub (YTABH): Change pic.tab.h to
pic_tab.h.

* src/preproc/pic/lex.cc: Change pic.tab.h to pic_tab.h.

* src/preproc/eqn/Makefile.sub (YTABH): Rename eqn.tab.h to
eqn_tab.h.

* src/preproc/eqn/lex.cc: #include eqn_tab.h, not eqn.tab.h.

* src/libs/libgroff/tmpfile.cc (DEFAULT_TMPDIR) [P_tmpdir]: If
P_tmpdir is defined, use it instead of the literal "/tmp".
(remove_tmp_files, add_tmp_file): New functions.
(xtmpfile): Record temporary files and register an atexit function
to delete them explicitly, instead of relying on the OS to do
that, which doesn't work on non-Unix systems.

* src/libs/libgroff/searchpath.cc: #include nonposix.h.
(search_path::search_path): Use PATH_SEP instead of a literal
colon.
(search_path::command_line_dir): Ditto.
(search_path::open_file): Use IS_ABSOLUTE, PATH_SEP and DIR_SEPS,
to support non-Posix systems.

* src/libc/libbib/search.cc: #include nonposix.h.
(search_list::add_file): Open the file in binary mode.

* src/libs/libbib/linear.cc: #include nonposix.h.
(file_buffer::load): Remove r characters preceding n from the
loaded buffer.

* src/libs/libbib/index.cc: #include nonposix.h.
(make_index_search_item): Open index_filename in O_BINARY mode.
(index_search_item_iterator::get_tag): Ditto.  Remove r
characters before n characters.
(index_search_item::check_files): Open files in binary mode.
(index_search_item::munge_filename): Support DOS-style file names
with backslashes and drive letters, use IS_ABSOLUTE.

* src/devices/grops/ps.cc: #include nonposix.h.
(main) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grolj4/lj4.cc: #include nonposix.h.
(main) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grolbp/lbp.cc: #include nonposix.h
(fill_pattern) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grodvi/dvi.cc: #include nonposix.h.
[_MSC_VER]: Remove inclusion of Windows-specific headers (done by
nonposix.h).
(main) [SET_BINARY]: Switch stdout to binary mode.
[_MSC_VER]: Remove an explicit call to _setmode.

* src/include/nonposix.h: New file.

* Makefile.in (ENVSETUP): New variable, to set up case-sensitive
operation when building with DJGPP.
($(TARGETS), dot, $(LIBDIRS), $(CPROGDIRS), $(CCPROGDIRS))
($(DEVDIRS), $(TTYDEVDIRS), $(INCDIRS), $(OTHERDIRS)): Use
ENVSETUP.

* Makefile.comm: mv y.tab.[ch] to y_tab.[ch], to make it work on
MS-DOS.
(.man.n): Replace `;' with `|', since FONTPATH, MACROPATH,
etc. can include a semi-colon on DOS/Windows.
(depend.temp): Use depend1.temp instead of depend.temp1, to
prevent files from overerwiting each other on 8+3 filesystems.

* gendef.sh (t): Change definition to work with DOS/Windows.

doc/groff.texinfo: Apart of some typo corrections, I also changed
some index entris, to make them more non-ambiguous, and also put
@ignore around some parts that are not yet written, to allow the
Info output be readable.



From groff-commit-admin  Sun Jun 18 12:14:14 2000
Received: (from wlemb@localhost)
	by genba.ffii.org (8.9.3/8.9.3/Debian/GNU) id MAA30094;
	Sun, 18 Jun 2000 12:14:14 +0200
Date: Sun, 18 Jun 2000 12:14:14 +0200
Message-Id: <200006181014.MAA30094@genba.ffii.org>
From: wlemb@ffii.org
To: groff-commit@ffii.org
Subject: [Groff-commit] Changes to //var/cvs/groff

Log from commit: 

Update of /var/cvs/groff/src/utils/indxbib
In directory genba:/vol2/tmp/cvs-serv28889/src/utils/indxbib

Modified Files:
	indxbib.cc 
Log Message:
* src/utils/tfmtodit/tfmtodit.cc: #include nonposix.h.
(tfm::load, gf::load): Open tfm and gf files in binary mode: these
are binary files.
(main): Support non-Posix systems with several different styles of
slash characters in file names.

* src/utils/pfbtops/pfbtops.c: #include nonposix.h.
(main) [SET_BINARY]: Switch stdin into binary mode.

* src/utils/indxbib/indxbib.cc: #include nonposix.h.
(main): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.
(main) [__MSDOS__]: If renaming the temporary index file fails
because it has more than one dot in its trunk, replace the dot
with an underscore and try again.
(do_file): Use FOPEN_RB instead of "r".  Skip every CR before a
Newline.
[__MSDOS__ || _MSC_VER]: Stop at the first ^Z character.

* src/utils/hpftodit/hpftodit.cc: #include nonposix.h.
(File::File): Open the input file in binary mode.  Strip CR
characters from each CR-LF pair.
(xbasename): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.

* src/include/Makefile.sub (HDRS): Add nonposix.h.

* src/roff/troff/node.cc [HAVE_UNISTD_H]: Include <unistd.h>.
(WIFEXITED, WEXITSTATUS, WTERMSIG, WIFSTOPPED, WSTOPSIG)
[!_POSIX_VERSION]: Define for traditional Unix systems.
(real_output_file::real_output_file): Remove the MSVC-specific
call to popen, use instead POPEN_WT, appropriately defined on
nonposix.h.  #include nonposix.h.
(real_output_file::~real_output_file): Remove the MSVC-specific
call to pclose, a suitable macro is now defined on nonposix.h.
Use the portable macros WIFEXITED, WIFSIGNALED, WTERMSIG, WSTOPSIG
and WEXITSTATUS instead of assuming traditional Unix
interpretation of the status returned by pclose.

* src/roff/troff/input.cc (pipe_source): Remove the MSVC-specific
call to popen, use POPEN_RT instead (appropriately defined on
nonposix.h).  #include nonposix.h.
(ps_bbox_request): Open the PostScript file in binary mode.
Close the file after processing it.
(getpid) [_MSC_VER]: Remove; a suitable macro is now defined on
nonposix.h.

* src/roff/groff/pipeline.c (run_pipeline) [__MSDOS__ || _WIN32]:
A version of run_pipeline that doesn't use `fork'.
(signal_catcher) [__MSDOS__ || _WIN32]: New function.
(system_shell_name, system_shell_dash_c)
(is_system_shell) [__MSDOS__ || _WIN32]: New functions, to hide
the ugliness of testing DOS/Windows file names for equality, and
support both stock shells and ports of Unix shells.

* src/roff/groff/groff.cc: #include nonposix.h.
(BSHELL): Definition moved to nonposix.h.
(main): Use PATH_SEP[0] instead of literal ':'.  Use BSHELL_DASH_C
instead of a literal "-c".
(xbasename): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.
(possible_command::print): Use BSHELL_DASH_C and IS_BSHELL instead
of literal strings.

* src/preproc/soelim/soelim.cc: #include nonposix.h.
(do_file): Use IS_ABSOLUTE instead of testing for a literal '/'.

* src/preproc/pic/Makefile.sub (YTABH): Change pic.tab.h to
pic_tab.h.

* src/preproc/pic/lex.cc: Change pic.tab.h to pic_tab.h.

* src/preproc/eqn/Makefile.sub (YTABH): Rename eqn.tab.h to
eqn_tab.h.

* src/preproc/eqn/lex.cc: #include eqn_tab.h, not eqn.tab.h.

* src/libs/libgroff/tmpfile.cc (DEFAULT_TMPDIR) [P_tmpdir]: If
P_tmpdir is defined, use it instead of the literal "/tmp".
(remove_tmp_files, add_tmp_file): New functions.
(xtmpfile): Record temporary files and register an atexit function
to delete them explicitly, instead of relying on the OS to do
that, which doesn't work on non-Unix systems.

* src/libs/libgroff/searchpath.cc: #include nonposix.h.
(search_path::search_path): Use PATH_SEP instead of a literal
colon.
(search_path::command_line_dir): Ditto.
(search_path::open_file): Use IS_ABSOLUTE, PATH_SEP and DIR_SEPS,
to support non-Posix systems.

* src/libc/libbib/search.cc: #include nonposix.h.
(search_list::add_file): Open the file in binary mode.

* src/libs/libbib/linear.cc: #include nonposix.h.
(file_buffer::load): Remove r characters preceding n from the
loaded buffer.

* src/libs/libbib/index.cc: #include nonposix.h.
(make_index_search_item): Open index_filename in O_BINARY mode.
(index_search_item_iterator::get_tag): Ditto.  Remove r
characters before n characters.
(index_search_item::check_files): Open files in binary mode.
(index_search_item::munge_filename): Support DOS-style file names
with backslashes and drive letters, use IS_ABSOLUTE.

* src/devices/grops/ps.cc: #include nonposix.h.
(main) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grolj4/lj4.cc: #include nonposix.h.
(main) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grolbp/lbp.cc: #include nonposix.h
(fill_pattern) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grodvi/dvi.cc: #include nonposix.h.
[_MSC_VER]: Remove inclusion of Windows-specific headers (done by
nonposix.h).
(main) [SET_BINARY]: Switch stdout to binary mode.
[_MSC_VER]: Remove an explicit call to _setmode.

* src/include/nonposix.h: New file.

* Makefile.in (ENVSETUP): New variable, to set up case-sensitive
operation when building with DJGPP.
($(TARGETS), dot, $(LIBDIRS), $(CPROGDIRS), $(CCPROGDIRS))
($(DEVDIRS), $(TTYDEVDIRS), $(INCDIRS), $(OTHERDIRS)): Use
ENVSETUP.

* Makefile.comm: mv y.tab.[ch] to y_tab.[ch], to make it work on
MS-DOS.
(.man.n): Replace `;' with `|', since FONTPATH, MACROPATH,
etc. can include a semi-colon on DOS/Windows.
(depend.temp): Use depend1.temp instead of depend.temp1, to
prevent files from overerwiting each other on 8+3 filesystems.

* gendef.sh (t): Change definition to work with DOS/Windows.

doc/groff.texinfo: Apart of some typo corrections, I also changed
some index entris, to make them more non-ambiguous, and also put
@ignore around some parts that are not yet written, to allow the
Info output be readable.



From groff-commit-admin  Sun Jun 18 12:14:15 2000
Received: (from wlemb@localhost)
	by genba.ffii.org (8.9.3/8.9.3/Debian/GNU) id MAA30136;
	Sun, 18 Jun 2000 12:14:15 +0200
Date: Sun, 18 Jun 2000 12:14:15 +0200
Message-Id: <200006181014.MAA30136@genba.ffii.org>
From: wlemb@ffii.org
To: groff-commit@ffii.org
Subject: [Groff-commit] Changes to //var/cvs/groff

Log from commit: 

Update of /var/cvs/groff/src/utils/pfbtops
In directory genba:/vol2/tmp/cvs-serv28889/src/utils/pfbtops

Modified Files:
	pfbtops.c 
Log Message:
* src/utils/tfmtodit/tfmtodit.cc: #include nonposix.h.
(tfm::load, gf::load): Open tfm and gf files in binary mode: these
are binary files.
(main): Support non-Posix systems with several different styles of
slash characters in file names.

* src/utils/pfbtops/pfbtops.c: #include nonposix.h.
(main) [SET_BINARY]: Switch stdin into binary mode.

* src/utils/indxbib/indxbib.cc: #include nonposix.h.
(main): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.
(main) [__MSDOS__]: If renaming the temporary index file fails
because it has more than one dot in its trunk, replace the dot
with an underscore and try again.
(do_file): Use FOPEN_RB instead of "r".  Skip every CR before a
Newline.
[__MSDOS__ || _MSC_VER]: Stop at the first ^Z character.

* src/utils/hpftodit/hpftodit.cc: #include nonposix.h.
(File::File): Open the input file in binary mode.  Strip CR
characters from each CR-LF pair.
(xbasename): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.

* src/include/Makefile.sub (HDRS): Add nonposix.h.

* src/roff/troff/node.cc [HAVE_UNISTD_H]: Include <unistd.h>.
(WIFEXITED, WEXITSTATUS, WTERMSIG, WIFSTOPPED, WSTOPSIG)
[!_POSIX_VERSION]: Define for traditional Unix systems.
(real_output_file::real_output_file): Remove the MSVC-specific
call to popen, use instead POPEN_WT, appropriately defined on
nonposix.h.  #include nonposix.h.
(real_output_file::~real_output_file): Remove the MSVC-specific
call to pclose, a suitable macro is now defined on nonposix.h.
Use the portable macros WIFEXITED, WIFSIGNALED, WTERMSIG, WSTOPSIG
and WEXITSTATUS instead of assuming traditional Unix
interpretation of the status returned by pclose.

* src/roff/troff/input.cc (pipe_source): Remove the MSVC-specific
call to popen, use POPEN_RT instead (appropriately defined on
nonposix.h).  #include nonposix.h.
(ps_bbox_request): Open the PostScript file in binary mode.
Close the file after processing it.
(getpid) [_MSC_VER]: Remove; a suitable macro is now defined on
nonposix.h.

* src/roff/groff/pipeline.c (run_pipeline) [__MSDOS__ || _WIN32]:
A version of run_pipeline that doesn't use `fork'.
(signal_catcher) [__MSDOS__ || _WIN32]: New function.
(system_shell_name, system_shell_dash_c)
(is_system_shell) [__MSDOS__ || _WIN32]: New functions, to hide
the ugliness of testing DOS/Windows file names for equality, and
support both stock shells and ports of Unix shells.

* src/roff/groff/groff.cc: #include nonposix.h.
(BSHELL): Definition moved to nonposix.h.
(main): Use PATH_SEP[0] instead of literal ':'.  Use BSHELL_DASH_C
instead of a literal "-c".
(xbasename): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.
(possible_command::print): Use BSHELL_DASH_C and IS_BSHELL instead
of literal strings.

* src/preproc/soelim/soelim.cc: #include nonposix.h.
(do_file): Use IS_ABSOLUTE instead of testing for a literal '/'.

* src/preproc/pic/Makefile.sub (YTABH): Change pic.tab.h to
pic_tab.h.

* src/preproc/pic/lex.cc: Change pic.tab.h to pic_tab.h.

* src/preproc/eqn/Makefile.sub (YTABH): Rename eqn.tab.h to
eqn_tab.h.

* src/preproc/eqn/lex.cc: #include eqn_tab.h, not eqn.tab.h.

* src/libs/libgroff/tmpfile.cc (DEFAULT_TMPDIR) [P_tmpdir]: If
P_tmpdir is defined, use it instead of the literal "/tmp".
(remove_tmp_files, add_tmp_file): New functions.
(xtmpfile): Record temporary files and register an atexit function
to delete them explicitly, instead of relying on the OS to do
that, which doesn't work on non-Unix systems.

* src/libs/libgroff/searchpath.cc: #include nonposix.h.
(search_path::search_path): Use PATH_SEP instead of a literal
colon.
(search_path::command_line_dir): Ditto.
(search_path::open_file): Use IS_ABSOLUTE, PATH_SEP and DIR_SEPS,
to support non-Posix systems.

* src/libc/libbib/search.cc: #include nonposix.h.
(search_list::add_file): Open the file in binary mode.

* src/libs/libbib/linear.cc: #include nonposix.h.
(file_buffer::load): Remove r characters preceding n from the
loaded buffer.

* src/libs/libbib/index.cc: #include nonposix.h.
(make_index_search_item): Open index_filename in O_BINARY mode.
(index_search_item_iterator::get_tag): Ditto.  Remove r
characters before n characters.
(index_search_item::check_files): Open files in binary mode.
(index_search_item::munge_filename): Support DOS-style file names
with backslashes and drive letters, use IS_ABSOLUTE.

* src/devices/grops/ps.cc: #include nonposix.h.
(main) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grolj4/lj4.cc: #include nonposix.h.
(main) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grolbp/lbp.cc: #include nonposix.h
(fill_pattern) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grodvi/dvi.cc: #include nonposix.h.
[_MSC_VER]: Remove inclusion of Windows-specific headers (done by
nonposix.h).
(main) [SET_BINARY]: Switch stdout to binary mode.
[_MSC_VER]: Remove an explicit call to _setmode.

* src/include/nonposix.h: New file.

* Makefile.in (ENVSETUP): New variable, to set up case-sensitive
operation when building with DJGPP.
($(TARGETS), dot, $(LIBDIRS), $(CPROGDIRS), $(CCPROGDIRS))
($(DEVDIRS), $(TTYDEVDIRS), $(INCDIRS), $(OTHERDIRS)): Use
ENVSETUP.

* Makefile.comm: mv y.tab.[ch] to y_tab.[ch], to make it work on
MS-DOS.
(.man.n): Replace `;' with `|', since FONTPATH, MACROPATH,
etc. can include a semi-colon on DOS/Windows.
(depend.temp): Use depend1.temp instead of depend.temp1, to
prevent files from overerwiting each other on 8+3 filesystems.

* gendef.sh (t): Change definition to work with DOS/Windows.

doc/groff.texinfo: Apart of some typo corrections, I also changed
some index entris, to make them more non-ambiguous, and also put
@ignore around some parts that are not yet written, to allow the
Info output be readable.



From groff-commit-admin  Sun Jun 18 12:14:17 2000
Received: (from wlemb@localhost)
	by genba.ffii.org (8.9.3/8.9.3/Debian/GNU) id MAA30183;
	Sun, 18 Jun 2000 12:14:17 +0200
Date: Sun, 18 Jun 2000 12:14:17 +0200
Message-Id: <200006181014.MAA30183@genba.ffii.org>
From: wlemb@ffii.org
To: groff-commit@ffii.org
Subject: [Groff-commit] Changes to //var/cvs/groff

Log from commit: 

Update of /var/cvs/groff/src/utils/tfmtodit
In directory genba:/vol2/tmp/cvs-serv28889/src/utils/tfmtodit

Modified Files:
	tfmtodit.cc 
Log Message:
* src/utils/tfmtodit/tfmtodit.cc: #include nonposix.h.
(tfm::load, gf::load): Open tfm and gf files in binary mode: these
are binary files.
(main): Support non-Posix systems with several different styles of
slash characters in file names.

* src/utils/pfbtops/pfbtops.c: #include nonposix.h.
(main) [SET_BINARY]: Switch stdin into binary mode.

* src/utils/indxbib/indxbib.cc: #include nonposix.h.
(main): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.
(main) [__MSDOS__]: If renaming the temporary index file fails
because it has more than one dot in its trunk, replace the dot
with an underscore and try again.
(do_file): Use FOPEN_RB instead of "r".  Skip every CR before a
Newline.
[__MSDOS__ || _MSC_VER]: Stop at the first ^Z character.

* src/utils/hpftodit/hpftodit.cc: #include nonposix.h.
(File::File): Open the input file in binary mode.  Strip CR
characters from each CR-LF pair.
(xbasename): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.

* src/include/Makefile.sub (HDRS): Add nonposix.h.

* src/roff/troff/node.cc [HAVE_UNISTD_H]: Include <unistd.h>.
(WIFEXITED, WEXITSTATUS, WTERMSIG, WIFSTOPPED, WSTOPSIG)
[!_POSIX_VERSION]: Define for traditional Unix systems.
(real_output_file::real_output_file): Remove the MSVC-specific
call to popen, use instead POPEN_WT, appropriately defined on
nonposix.h.  #include nonposix.h.
(real_output_file::~real_output_file): Remove the MSVC-specific
call to pclose, a suitable macro is now defined on nonposix.h.
Use the portable macros WIFEXITED, WIFSIGNALED, WTERMSIG, WSTOPSIG
and WEXITSTATUS instead of assuming traditional Unix
interpretation of the status returned by pclose.

* src/roff/troff/input.cc (pipe_source): Remove the MSVC-specific
call to popen, use POPEN_RT instead (appropriately defined on
nonposix.h).  #include nonposix.h.
(ps_bbox_request): Open the PostScript file in binary mode.
Close the file after processing it.
(getpid) [_MSC_VER]: Remove; a suitable macro is now defined on
nonposix.h.

* src/roff/groff/pipeline.c (run_pipeline) [__MSDOS__ || _WIN32]:
A version of run_pipeline that doesn't use `fork'.
(signal_catcher) [__MSDOS__ || _WIN32]: New function.
(system_shell_name, system_shell_dash_c)
(is_system_shell) [__MSDOS__ || _WIN32]: New functions, to hide
the ugliness of testing DOS/Windows file names for equality, and
support both stock shells and ports of Unix shells.

* src/roff/groff/groff.cc: #include nonposix.h.
(BSHELL): Definition moved to nonposix.h.
(main): Use PATH_SEP[0] instead of literal ':'.  Use BSHELL_DASH_C
instead of a literal "-c".
(xbasename): Support file names with several possible slash-type
characters, as given by DIR_SEPS[] in nonposix.h.
(possible_command::print): Use BSHELL_DASH_C and IS_BSHELL instead
of literal strings.

* src/preproc/soelim/soelim.cc: #include nonposix.h.
(do_file): Use IS_ABSOLUTE instead of testing for a literal '/'.

* src/preproc/pic/Makefile.sub (YTABH): Change pic.tab.h to
pic_tab.h.

* src/preproc/pic/lex.cc: Change pic.tab.h to pic_tab.h.

* src/preproc/eqn/Makefile.sub (YTABH): Rename eqn.tab.h to
eqn_tab.h.

* src/preproc/eqn/lex.cc: #include eqn_tab.h, not eqn.tab.h.

* src/libs/libgroff/tmpfile.cc (DEFAULT_TMPDIR) [P_tmpdir]: If
P_tmpdir is defined, use it instead of the literal "/tmp".
(remove_tmp_files, add_tmp_file): New functions.
(xtmpfile): Record temporary files and register an atexit function
to delete them explicitly, instead of relying on the OS to do
that, which doesn't work on non-Unix systems.

* src/libs/libgroff/searchpath.cc: #include nonposix.h.
(search_path::search_path): Use PATH_SEP instead of a literal
colon.
(search_path::command_line_dir): Ditto.
(search_path::open_file): Use IS_ABSOLUTE, PATH_SEP and DIR_SEPS,
to support non-Posix systems.

* src/libc/libbib/search.cc: #include nonposix.h.
(search_list::add_file): Open the file in binary mode.

* src/libs/libbib/linear.cc: #include nonposix.h.
(file_buffer::load): Remove r characters preceding n from the
loaded buffer.

* src/libs/libbib/index.cc: #include nonposix.h.
(make_index_search_item): Open index_filename in O_BINARY mode.
(index_search_item_iterator::get_tag): Ditto.  Remove r
characters before n characters.
(index_search_item::check_files): Open files in binary mode.
(index_search_item::munge_filename): Support DOS-style file names
with backslashes and drive letters, use IS_ABSOLUTE.

* src/devices/grops/ps.cc: #include nonposix.h.
(main) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grolj4/lj4.cc: #include nonposix.h.
(main) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grolbp/lbp.cc: #include nonposix.h
(fill_pattern) [SET_BINARY]: Switch stdout to binary mode.

* src/devices/grodvi/dvi.cc: #include nonposix.h.
[_MSC_VER]: Remove inclusion of Windows-specific headers (done by
nonposix.h).
(main) [SET_BINARY]: Switch stdout to binary mode.
[_MSC_VER]: Remove an explicit call to _setmode.

* src/include/nonposix.h: New file.

* Makefile.in (ENVSETUP): New variable, to set up case-sensitive
operation when building with DJGPP.
($(TARGETS), dot, $(LIBDIRS), $(CPROGDIRS), $(CCPROGDIRS))
($(DEVDIRS), $(TTYDEVDIRS), $(INCDIRS), $(OTHERDIRS)): Use
ENVSETUP.

* Makefile.comm: mv y.tab.[ch] to y_tab.[ch], to make it work on
MS-DOS.
(.man.n): Replace `;' with `|', since FONTPATH, MACROPATH,
etc. can include a semi-colon on DOS/Windows.
(depend.temp): Use depend1.temp instead of depend.temp1, to
prevent files from overerwiting each other on 8+3 filesystems.

* gendef.sh (t): Change definition to work with DOS/Windows.

doc/groff.texinfo: Apart of some typo corrections, I also changed
some index entris, to make them more non-ambiguous, and also put
@ignore around some parts that are not yet written, to allow the
Info output be readable.



From groff-commit-admin  Sun Jun 18 12:15:44 2000
Received: (from wlemb@localhost)
	by genba.ffii.org (8.9.3/8.9.3/Debian/GNU) id MAA30770;
	Sun, 18 Jun 2000 12:15:44 +0200
Date: Sun, 18 Jun 2000 12:15:44 +0200
Message-Id: <200006181015.MAA30770@genba.ffii.org>
From: wlemb@ffii.org
To: groff-commit@ffii.org
Subject: [Groff-commit] Changes to //var/cvs/groff

Log from commit: 

Update of /var/cvs/groff/src/include
In directory genba:/vol2/tmp/cvs-serv30619

Added Files:
	nonposix.h 
Log Message:


New file for non-POSIX systems.



From groff-commit-admin  Sun Jun 18 12:18:19 2000
Received: (from wlemb@localhost)
	by genba.ffii.org (8.9.3/8.9.3/Debian/GNU) id MAA31589;
	Sun, 18 Jun 2000 12:18:19 +0200
Date: Sun, 18 Jun 2000 12:18:19 +0200
Message-Id: <200006181018.MAA31589@genba.ffii.org>
From: wlemb@ffii.org
To: groff-commit@ffii.org
Subject: [Groff-commit] Changes to //var/cvs/groff

Log from commit: 

Update of /var/cvs/groff/arch/djgpp
In directory genba:/vol2/tmp/cvs-serv31498

Modified Files:
	config.bat t-groff.bat 
Log Message:


converted to CR/LF as needed by MSDOS



From groff-commit-admin  Sat Jun 24 22:21:52 2000
Received: (from wlemb@localhost)
	by genba.ffii.org (8.9.3/8.9.3/Debian/GNU) id WAA31867;
	Sat, 24 Jun 2000 22:21:52 +0200
Date: Sat, 24 Jun 2000 22:21:52 +0200
Message-Id: <200006242021.WAA31867@genba.ffii.org>
From: wlemb@ffii.org
To: groff-commit@ffii.org
Subject: [Groff-commit] Changes to //var/cvs/groff
Sender: groff-commit-admin@ffii.org
Errors-To: groff-commit-admin@ffii.org
X-BeenThere: groff-commit@ffii.org
X-Mailman-Version: 2.0beta2.local2
Precedence: bulk
List-Id: CVS commit list for groff <groff-commit.ffii.org>

Log from commit: 

Update of /var/cvs/groff
In directory genba:/vol2/tmp/cvs-serv31855

Modified Files:
	ChangeLog 
Log Message:
* src/roff/grog/Makefile.sub (grog): Prepend `-e' to
$(SH_SCRIPT_SED_CMD), for the case where its value is empty.


From groff-commit-admin  Sat Jun 24 22:21:52 2000
Received: (from wlemb@localhost)
	by genba.ffii.org (8.9.3/8.9.3/Debian/GNU) id WAA31885;
	Sat, 24 Jun 2000 22:21:52 +0200
Date: Sat, 24 Jun 2000 22:21:52 +0200
Message-Id: <200006242021.WAA31885@genba.ffii.org>
From: wlemb@ffii.org
To: groff-commit@ffii.org
Subject: [Groff-commit] Changes to //var/cvs/groff
Sender: groff-commit-admin@ffii.org
Errors-To: groff-commit-admin@ffii.org
X-BeenThere: groff-commit@ffii.org
X-Mailman-Version: 2.0beta2.local2
Precedence: bulk
List-Id: CVS commit list for groff <groff-commit.ffii.org>

Log from commit: 

Update of /var/cvs/groff/src/roff/grog
In directory genba:/vol2/tmp/cvs-serv31855/src/roff/grog

Modified Files:
	Makefile.sub 
Log Message:
* src/roff/grog/Makefile.sub (grog): Prepend `-e' to
$(SH_SCRIPT_SED_CMD), for the case where its value is empty.


From groff-commit-admin  Mon Jun 26 15:57:26 2000
Received: (from wlemb@localhost)
	by genba.ffii.org (8.9.3/8.9.3/Debian/GNU) id PAA14714;
	Mon, 26 Jun 2000 15:57:26 +0200
Date: Mon, 26 Jun 2000 15:57:26 +0200
Message-Id: <200006261357.PAA14714@genba.ffii.org>
From: wlemb@ffii.org
To: groff-commit@ffii.org
Subject: [Groff-commit] Changes to //var/cvs/groff
Sender: groff-commit-admin@ffii.org
Errors-To: groff-commit-admin@ffii.org
X-BeenThere: groff-commit@ffii.org
X-Mailman-Version: 2.0beta2.local2
Precedence: bulk
List-Id: CVS commit list for groff <groff-commit.ffii.org>

Log from commit: 

Update of /var/cvs/groff
In directory genba:/vol2/tmp/cvs-serv14616

Modified Files:
	ChangeLog README.WIN32 win32-diffs 
Log Message:
* src/devics/grodvi/dvi.cc: Replace _setmode() (for MSC) with
SET_BINARY().

* src/include/posix.h: Use HAVE_UNISTD instead of _MSC_VER.

* win32-diffs: Updated.
* README.WIN32: Added CRs to make all Windows editors happy.

* src/roff/troff/node.cc: Added WIFSIGNALED() macro (copied from
src/roff/groff/pipeline.c).


From groff-commit-admin  Mon Jun 26 15:57:27 2000
Received: (from wlemb@localhost)
	by genba.ffii.org (8.9.3/8.9.3/Debian/GNU) id PAA14770;
	Mon, 26 Jun 2000 15:57:27 +0200
Date: Mon, 26 Jun 2000 15:57:27 +0200
Message-Id: <200006261357.PAA14770@genba.ffii.org>
From: wlemb@ffii.org
To: groff-commit@ffii.org
Subject: [Groff-commit] Changes to //var/cvs/groff
Sender: groff-commit-admin@ffii.org
Errors-To: groff-commit-admin@ffii.org
X-BeenThere: groff-commit@ffii.org
X-Mailman-Version: 2.0beta2.local2
Precedence: bulk
List-Id: CVS commit list for groff <groff-commit.ffii.org>

Log from commit: 

Update of /var/cvs/groff/src/roff/troff
In directory genba:/vol2/tmp/cvs-serv14616/src/roff/troff

Modified Files:
	node.cc 
Log Message:
* src/devics/grodvi/dvi.cc: Replace _setmode() (for MSC) with
SET_BINARY().

* src/include/posix.h: Use HAVE_UNISTD instead of _MSC_VER.

* win32-diffs: Updated.
* README.WIN32: Added CRs to make all Windows editors happy.

* src/roff/troff/node.cc: Added WIFSIGNALED() macro (copied from
src/roff/groff/pipeline.c).


From groff-commit-admin  Mon Jun 26 15:57:26 2000
Received: (from wlemb@localhost)
	by genba.ffii.org (8.9.3/8.9.3/Debian/GNU) id PAA14748;
	Mon, 26 Jun 2000 15:57:26 +0200
Date: Mon, 26 Jun 2000 15:57:26 +0200
Message-Id: <200006261357.PAA14748@genba.ffii.org>
From: wlemb@ffii.org
To: groff-commit@ffii.org
Subject: [Groff-commit] Changes to //var/cvs/groff
Sender: groff-commit-admin@ffii.org
Errors-To: groff-commit-admin@ffii.org
X-BeenThere: groff-commit@ffii.org
X-Mailman-Version: 2.0beta2.local2
Precedence: bulk
List-Id: CVS commit list for groff <groff-commit.ffii.org>

Log from commit: 

Update of /var/cvs/groff/src/include
In directory genba:/vol2/tmp/cvs-serv14616/src/include

Modified Files:
	posix.h 
Log Message:
* src/devics/grodvi/dvi.cc: Replace _setmode() (for MSC) with
SET_BINARY().

* src/include/posix.h: Use HAVE_UNISTD instead of _MSC_VER.

* win32-diffs: Updated.
* README.WIN32: Added CRs to make all Windows editors happy.

* src/roff/troff/node.cc: Added WIFSIGNALED() macro (copied from
src/roff/groff/pipeline.c).


From groff-commit-admin  Mon Jun 26 15:57:26 2000
Received: (from wlemb@localhost)
	by genba.ffii.org (8.9.3/8.9.3/Debian/GNU) id PAA14731;
	Mon, 26 Jun 2000 15:57:26 +0200
Date: Mon, 26 Jun 2000 15:57:26 +0200
Message-Id: <200006261357.PAA14731@genba.ffii.org>
From: wlemb@ffii.org
To: groff-commit@ffii.org
Subject: [Groff-commit] Changes to //var/cvs/groff
Sender: groff-commit-admin@ffii.org
Errors-To: groff-commit-admin@ffii.org
X-BeenThere: groff-commit@ffii.org
X-Mailman-Version: 2.0beta2.local2
Precedence: bulk
List-Id: CVS commit list for groff <groff-commit.ffii.org>

Log from commit: 

Update of /var/cvs/groff/src/devices/grodvi
In directory genba:/vol2/tmp/cvs-serv14616/src/devices/grodvi

Modified Files:
	dvi.cc 
Log Message:
* src/devics/grodvi/dvi.cc: Replace _setmode() (for MSC) with
SET_BINARY().

* src/include/posix.h: Use HAVE_UNISTD instead of _MSC_VER.

* win32-diffs: Updated.
* README.WIN32: Added CRs to make all Windows editors happy.

* src/roff/troff/node.cc: Added WIFSIGNALED() macro (copied from
src/roff/groff/pipeline.c).


