From MAILER-DAEMON Sun Feb 02 23:19:47 2014
Received: from list by lists.gnu.org with archive (Exim 4.71)
	id 1WAB0c-0004yh-Vz
	for mharc-libtool-commit@gnu.org; Sun, 02 Feb 2014 23:19:46 -0500
Received: from eggs.gnu.org ([2001:4830:134:3::10]:47085)
	by lists.gnu.org with esmtp (Exim 4.71)
	(envelope-from <INVALID.NOREPLY@gnu.org>) id 1WAB0a-0004x1-3j
	for libtool-commit@gnu.org; Sun, 02 Feb 2014 23:19:45 -0500
Received: from Debian-exim by eggs.gnu.org with spam-scanned (Exim 4.71)
	(envelope-from <INVALID.NOREPLY@gnu.org>) id 1WAB0Y-0005t0-Pe
	for libtool-commit@gnu.org; Sun, 02 Feb 2014 23:19:44 -0500
Received: from vcs.savannah.gnu.org ([140.186.70.72]:43777)
	by eggs.gnu.org with esmtp (Exim 4.71)
	(envelope-from <INVALID.NOREPLY@gnu.org>) id 1WAB0Y-0005sw-Lu
	for libtool-commit@gnu.org; Sun, 02 Feb 2014 23:19:42 -0500
Received: from gary by vcs.savannah.gnu.org with local (Exim 4.72)
	(envelope-from <INVALID.NOREPLY@gnu.org>) id 1WAB0Y-0001DE-8l
	for libtool-commit@gnu.org; Mon, 03 Feb 2014 04:19:42 +0000
Date: Mon, 03 Feb 2014 04:19:42 +0000
Message-Id: <E1WAB0Y-0001DE-8l@vcs.savannah.gnu.org>
From: "Gary V. Vaughan" <gary@gnu.org>
To: libtool-commit@gnu.org
Subject: [SCM] GNU Libtool branch, master, updated. v2.4.2.444-24-g4d57e09
X-Git-Refname: refs/heads/master
X-Git-Reftype: branch
X-Git-Oldrev: 70ff0e04c9dda19b74c88005abed3c1ca4adc3fc
X-Git-Newrev: 4d57e0905a2c5ba0e537c8b3ccc116cdc0240c5d
X-detected-operating-system: by eggs.gnu.org: GNU/Linux 2.6.x
X-Received-From: 140.186.70.72
X-BeenThere: libtool-commit@gnu.org
X-Mailman-Version: 2.1.14
Precedence: list
List-Id: CVS commit notices for the GNU libtool shared library maintenance
	tool <libtool-commit.gnu.org>
List-Unsubscribe: <https://lists.gnu.org/mailman/options/libtool-commit>,
	<mailto:libtool-commit-request@gnu.org?subject=unsubscribe>
List-Archive: <http://lists.gnu.org/archive/html/libtool-commit>
List-Post: <mailto:libtool-commit@gnu.org>
List-Help: <mailto:libtool-commit-request@gnu.org?subject=help>
List-Subscribe: <https://lists.gnu.org/mailman/listinfo/libtool-commit>,
	<mailto:libtool-commit-request@gnu.org?subject=subscribe>
X-List-Received-Date: Mon, 03 Feb 2014 04:19:45 -0000

This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "GNU Libtool".

The branch, master has been updated
       via  4d57e0905a2c5ba0e537c8b3ccc116cdc0240c5d (commit)
      from  70ff0e04c9dda19b74c88005abed3c1ca4adc3fc (commit)

Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.

- Log -----------------------------------------------------------------
commit 4d57e0905a2c5ba0e537c8b3ccc116cdc0240c5d
Author: Bruce Korb <bkorb@gnu.org>
Date:   Mon Feb 3 17:16:44 2014 +1300

    bootstrap: check for git tree with .git/. in case of soft links.
    
    * gl/build-aux/bootstrap.in (func_require_git): Use
    `test -d .git/.` to defeat soft-links versus non-GNU test.
    * bootstrap: Regenerate.
    * THANKS: Remove duplicate Bruce Korb entry.
    
    Copyright-paperwork-exempt: Yes
    Signed-off-by: Gary V. Vaughan <gary@gnu.org>

-----------------------------------------------------------------------

Summary of changes:
 THANKS                    |    1 -
 bootstrap                 |    2 +-
 gl/build-aux/bootstrap.in |    2 +-
 3 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/THANKS b/THANKS
index 63d3ea2..de0cfde 100644
--- a/THANKS
+++ b/THANKS
@@ -78,7 +78,6 @@
   Brad Smith			brad@comstyle.com
   Brent Leback			brent.leback@st.com
   Brian Barrett			brbarret@osl.iu.edu
-  Bruce Korb			bruce.korb@gmail.com
   Bruno Haible			haible@ilog.fr
   Brice De Bruyne		bricedb@gmail.com
   Camilo La Rota		camilo.larota@ens-lyon.fr
diff --git a/bootstrap b/bootstrap
index 4e24dbf..feb20a1 100755
--- a/bootstrap
+++ b/bootstrap
@@ -3698,7 +3698,7 @@ func_require_git ()
     $opt_skip_git && GIT=true
 
     test true = "$GIT" || {
-      if test -d .git; then
+      if test -d .git/.; then
         ($GIT --version) >/dev/null 2>&1 || GIT=true
       fi
     }
diff --git a/gl/build-aux/bootstrap.in b/gl/build-aux/bootstrap.in
index d0276f6..266eb20 100755
--- a/gl/build-aux/bootstrap.in
+++ b/gl/build-aux/bootstrap.in
@@ -1367,7 +1367,7 @@ func_require_git ()
     $opt_skip_git && GIT=true
 
     test true = "$GIT" || {
-      if test -d .git; then
+      if test -d .git/.; then
         ($GIT --version) >/dev/null 2>&1 || GIT=true
       fi
     }


hooks/post-receive
-- 
GNU Libtool


From MAILER-DAEMON Wed Feb 05 18:09:33 2014
Received: from list by lists.gnu.org with archive (Exim 4.71)
	id 1WBBb3-0008D4-Qp
	for mharc-libtool-commit@gnu.org; Wed, 05 Feb 2014 18:09:33 -0500
Received: from eggs.gnu.org ([2001:4830:134:3::10]:55878)
	by lists.gnu.org with esmtp (Exim 4.71)
	(envelope-from <INVALID.NOREPLY@gnu.org>) id 1WBBaz-0008Ci-OQ
	for libtool-commit@gnu.org; Wed, 05 Feb 2014 18:09:32 -0500
Received: from Debian-exim by eggs.gnu.org with spam-scanned (Exim 4.71)
	(envelope-from <INVALID.NOREPLY@gnu.org>) id 1WBBax-00089X-7x
	for libtool-commit@gnu.org; Wed, 05 Feb 2014 18:09:29 -0500
Received: from vcs.savannah.gnu.org ([140.186.70.72]:60991)
	by eggs.gnu.org with esmtp (Exim 4.71)
	(envelope-from <INVALID.NOREPLY@gnu.org>) id 1WBBax-00089T-41
	for libtool-commit@gnu.org; Wed, 05 Feb 2014 18:09:27 -0500
Received: from gary by vcs.savannah.gnu.org with local (Exim 4.72)
	(envelope-from <INVALID.NOREPLY@gnu.org>) id 1WBBaw-0004Kq-Kq
	for libtool-commit@gnu.org; Wed, 05 Feb 2014 23:09:26 +0000
Date: Wed, 05 Feb 2014 23:09:26 +0000
Message-Id: <E1WBBaw-0004Kq-Kq@vcs.savannah.gnu.org>
From: "Gary V. Vaughan" <gary@gnu.org>
To: libtool-commit@gnu.org
Subject: [SCM] GNU Libtool branch, master, updated. v2.4.2.444-25-gfa83d29
X-Git-Refname: refs/heads/master
X-Git-Reftype: branch
X-Git-Oldrev: 4d57e0905a2c5ba0e537c8b3ccc116cdc0240c5d
X-Git-Newrev: fa83d293d95e2e3bdfbfe739fc12e5c3a6307b64
X-detected-operating-system: by eggs.gnu.org: GNU/Linux 2.6.x
X-Received-From: 140.186.70.72
X-BeenThere: libtool-commit@gnu.org
X-Mailman-Version: 2.1.14
Precedence: list
List-Id: CVS commit notices for the GNU libtool shared library maintenance
	tool <libtool-commit.gnu.org>
List-Unsubscribe: <https://lists.gnu.org/mailman/options/libtool-commit>,
	<mailto:libtool-commit-request@gnu.org?subject=unsubscribe>
List-Archive: <http://lists.gnu.org/archive/html/libtool-commit>
List-Post: <mailto:libtool-commit@gnu.org>
List-Help: <mailto:libtool-commit-request@gnu.org?subject=help>
List-Subscribe: <https://lists.gnu.org/mailman/listinfo/libtool-commit>,
	<mailto:libtool-commit-request@gnu.org?subject=subscribe>
X-List-Received-Date: Wed, 05 Feb 2014 23:09:32 -0000

This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "GNU Libtool".

The branch, master has been updated
       via  fa83d293d95e2e3bdfbfe739fc12e5c3a6307b64 (commit)
      from  4d57e0905a2c5ba0e537c8b3ccc116cdc0240c5d (commit)

Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.

- Log -----------------------------------------------------------------
commit fa83d293d95e2e3bdfbfe739fc12e5c3a6307b64
Author: Gary V. Vaughan <gary@gnu.org>
Date:   Thu Feb 6 12:05:04 2014 +1300

    doc: remove redundant "in order to" phrase where possible.
    
    * doc/libtool.texi: Remove many occurrences of the redundant
    phrase "in order to", where ever "to" is as clear or clearer.
    * THANKS: Add attribution.
    Reported by Dave Yost
    
    Signed-off-by: Gary V. Vaughan <gary@gnu.org>

-----------------------------------------------------------------------

Summary of changes:
 THANKS           |    1 +
 doc/libtool.texi |   55 ++++++++++++++++++++++++++---------------------------
 2 files changed, 28 insertions(+), 28 deletions(-)

diff --git a/THANKS b/THANKS
index de0cfde..e895aee 100644
--- a/THANKS
+++ b/THANKS
@@ -94,6 +94,7 @@
   Daniel Reed			n@ml.org
   Daniel Richard G.		skunk@iSKUNK.ORG
   Dave Korn			dave.korn.cygwin@googlemail.com
+  Dave Yost			Dave@Yost.com
   DJ Delorie			dj@delorie.com
   Donn Washburn			n5xwb@comcast.net
   Edouard G. Parmelan		Edouard.Parmelan@France.NCR.COM
diff --git a/doc/libtool.texi b/doc/libtool.texi
index 05fec92..89c5d1a 100644
--- a/doc/libtool.texi
+++ b/doc/libtool.texi
@@ -241,7 +241,7 @@ each host type is available via a generic interface, but nasty quirks
 are hidden from the programmer.
 
 GNU Libtool's consistent interface is reassuring@dots{} users don't need
-to read obscure documentation in order to have their favorite source
+to read obscure documentation to have their favorite source
 package build shared libraries.  They just run your package
 @code{configure} script (or equivalent), and libtool does all the dirty
 work.
@@ -694,7 +694,7 @@ make it easier to clean up the build directory, and to help ensure that
 other programs fail horribly if you accidentally forget to use libtool
 when you should.
 
-Again, you may want to have a look at the @file{.la} file in order
+Again, you may want to have a look at the @file{.la} file
 to see what Libtool stores in it.  In particular, you will see that
 Libtool uses this file to remember the destination directory for the
 library (the argument to @option{-rpath}) as well as the dependency
@@ -952,7 +952,7 @@ burger$
 @end example
 
 Argh.  Now GDB complains because it cannot find the shared library that
-@file{hell} is linked against.  So, we must use libtool in order to
+@file{hell} is linked against.  So, we must use libtool to
 properly set the library path and run the debugger.  Fortunately, we can
 forget all about the @file{@value{objdir}} directory, and just run it on
 the executable wrapper (@pxref{Execute mode}):
@@ -2039,7 +2039,7 @@ automake, The Automake Manual}, for more information.
 @cindex configuring libtool
 
 Libtool requires intimate knowledge of your compiler suite and operating
-system in order to be able to create shared libraries and link against
+system to be able to create shared libraries and link against
 them properly.  When you install the libtool distribution, a
 system-specific libtool script is installed into your binary directory.
 
@@ -2054,7 +2054,7 @@ system features, then generates the @file{Makefile}s (and possibly a
 @file{config.h} header file), after which you can run @code{make} and
 build the package.
 
-Libtool adds its own tests to your @code{configure} script in order to
+Libtool adds its own tests to your @code{configure} script to
 generate a libtool script for the installer's host machine.
 
 @menu
@@ -2747,7 +2747,7 @@ Manipulation Program, for those who haven't taken the plunge.  See
 @url{http://www.gimp.org/}.} distribution @file{README}:
 
 @example
-The GIMP uses GNU Libtool in order to build shared libraries on a
+The GIMP uses GNU Libtool to build shared libraries on a
 variety of systems.  While this is very nice for making usable
 binaries, it can be a pain when trying to debug a program.  For that
 reason, compilation of shared libraries can be turned off by
@@ -2761,7 +2761,7 @@ specifying the @option{--disable-shared} option to @file{configure}.
 @cindex languages, non-C
 @cindex C++, using
 
-Libtool was first implemented in order to add support for writing shared
+Libtool was first implemented to add support for writing shared
 libraries in the C language.  However, over time, libtool is being
 integrated with other languages, so that programmers are free to reap
 the benefits of shared libraries in their favorite programming language.
@@ -2788,7 +2788,7 @@ process, because its object files differ from C ones in only three ways:
 @item
 Because of name mangling, C++ libraries are only usable by the C++
 compiler that created them.  This decision was made by the designers of
-C++ in order to protect users from conflicting implementations of
+C++ to protect users from conflicting implementations of
 features such as constructors, exception handling, and RTTI.
 
 @item
@@ -3040,7 +3040,7 @@ the old version at runtime: set @var{revision} to 0, bump @var{current}
 and @var{age}.
 
 @item
-Programs may need to be changed, recompiled, relinked in order to use
+Programs may need to be changed, recompiled, and relinked in order to use
 the new version.  Bump @var{current}, set @var{revision} and @var{age}
 to 0.
 @end enumerate
@@ -3074,8 +3074,8 @@ library interface versions, because the library interface rarely changes
 at the same time that the release number does, and the library suffix is
 never the same across all platforms.
 
-So, in order to accommodate both views, you can use the @option{-release}
-flag in order to set release information for libraries for which you do not
+So, to accommodate both views, you can use the @option{-release}
+flag to set release information for libraries for which you do not
 want to use @option{-version-info}.  For the @file{libbfd} example, the
 next release that uses libtool should be built with @samp{-release
 2.9.0}, which will produce the following files on GNU/Linux:
@@ -3194,8 +3194,7 @@ Non-ANSI compilers will report errors if functions are prototyped.
 @end table
 
 These complications mean that your library interface headers must use
-some C preprocessor magic in order to be usable by each of the above
-compilers.
+some C preprocessor magic to be usable by each of the above compilers.
 
 @file{foo.h} in the @file{tests/demo} subdirectory of the libtool
 distribution serves as an example for how to write a header file that
@@ -3323,7 +3322,7 @@ burger$
 
 When you link a program against @file{libhello}, you don't need to
 specify the same @samp{-l} options again: libtool will do that for you,
-in order to guarantee that all the required libraries are found.  This
+to guarantee that all the required libraries are found.  This
 restriction is only necessary to preserve compatibility with static
 library systems and simple dynamic library systems.
 
@@ -3446,13 +3445,13 @@ then the compile time linker refuses to create the executable.
 
 @item
 Declaring a static library to the linker, so that it is searched at link
-time in order to satisfy any undefined references in the above object
+time to satisfy any undefined references in the above object
 files.  If the static library cannot be found, then the compile time
 linker refuses to create the executable.
 
 @item
 Declaring a shared library to the runtime linker, so that it is searched
-at runtime in order to satisfy any undefined references in the above
+at runtime to satisfy any undefined references in the above
 files.  If the shared library cannot be found, then the dynamic linker
 aborts the program before it runs.
 
@@ -3738,7 +3737,7 @@ family of functions.  Some platforms do not even use the same function
 names (notably HP-UX, with its @code{shl_load} family).
 
 @item
-The application developer must write a custom search function in order
+The application developer must write a custom search function
 to discover the correct module filename to supply to @code{dlopen}.
 @end itemize
 
@@ -3825,7 +3824,7 @@ relies on the old deprecated symbol names, defining
 @samp{LT_NON_POSIX_NAMESPACE} before you include @file{ltdl.h} provides
 conversion macros.  Whichever set of symbols you use, the new API is
 not binary compatible with the last, so you will need to recompile
-your application in order to use this version of libltdl.
+your application to use this version of libltdl.
 
 @noindent
 Note that libltdl is not well tested in a multithreaded environment,
@@ -4266,7 +4265,7 @@ the module @var{handle}.  The contents of the struct must not be modified.
 Return @code{NULL} on failure.
 @end deftypefun
 
-Furthermore, in order to save you from having to keep a list of the
+Furthermore, to save you from having to keep a list of the
 handles of all the modules you have loaded, these functions allow you to
 iterate over libltdl's list of loaded modules:
 
@@ -4886,7 +4885,7 @@ This is the default unless you explicitly add @code{installable} to
 your @code{LTDL_INIT} options.
 
 This keyword will cause options to be passed to the @command{configure}
-script in the subdirectory named by @code{LT_CONFIG_LTDL_DIR} in order
+script in the subdirectory named by @code{LT_CONFIG_LTDL_DIR}
 to cause it to be built as a convenience library.  If you're not
 using automake, you will need to define @code{top_build_prefix},
 @code{top_builddir}, and @code{top_srcdir} in your makefile so that
@@ -4910,7 +4909,7 @@ other libraries that might use @code{libltdl} too.
 
 @item installable
 This keyword will pass options to the @command{configure}
-script in the subdirectory named by @code{LT_CONFIG_LTDL_DIR} in order
+script in the subdirectory named by @code{LT_CONFIG_LTDL_DIR}
 to cause it to be built as an installable library.  If you're not
 using automake, you will need to define @code{top_build_prefix},
 @code{top_builddir} and @code{top_srcdir} in your makefile so that
@@ -5103,7 +5102,7 @@ past problems with libtool, and known deficiencies in other operating
 systems.
 
 As described in the @file{README} file, you may run @kbd{make -k check}
-after you have built libtool (possibly before you install it) in order
+after you have built libtool (possibly before you install it)
 to make sure that it meets basic functional requirements.
 
 @menu
@@ -5709,7 +5708,7 @@ usually willing to volunteer to help you with new ports, so you can send
 the information to them.
 
 To do the port yourself, you'll definitely need to modify the
-@code{libtool.m4} macros in order to make platform-specific changes to
+@code{libtool.m4} macros to make platform-specific changes to
 the configuration process.  You should search that file for the
 @code{PORTME} keyword, which will give you some hints on what you'll
 need to change.  In general, all that is involved is modifying the
@@ -5749,7 +5748,7 @@ looks in the library link path for libraries that have the right
 libname.  Then it runs @samp{$file_magic_cmd} on the library and checks
 for a match against the extended regular expression @var{regex}.  When
 @code{file_magic_test_file} is set by @file{libtool.m4}, it is used as an
-argument to @samp{$file_magic_cmd} in order to verify whether the
+argument to @samp{$file_magic_cmd} to verify whether the
 regular expression matches its output, and warn the user otherwise.
 
 @item test_compile
@@ -6662,7 +6661,7 @@ Set to the name of the @command{ranlib} program, if any.
 @end defvar
 
 @defvar allow_undefined_flag
-The flag that is used by @samp{archive_cmds} in order to declare that
+The flag that is used by @samp{archive_cmds} to declare that
 there will be unresolved symbols in the resulting shared library.
 Empty, if no such flag is required.  Set to @samp{unsupported} if there
 is no way to generate a shared library with references to symbols that
@@ -6694,7 +6693,7 @@ not used.
 @end defvar
 
 @defvar old_archive_from_expsyms_cmds
-If a static library must be created from the export symbol list in order to
+If a static library must be created from the export symbol list to
 correctly link with a shared library, @samp{old_archive_from_expsyms_cmds}
 contains the commands needed to create that static library.  When these
 commands are executed, the variable @code{soname} contains the name of the
@@ -6988,7 +6987,7 @@ external global symbols as @code{char}.
 @end defvar
 
 @defvar no_undefined_flag
-The flag that is used by @samp{archive_cmds} in order to declare that
+The flag that is used by @samp{archive_cmds} to declare that
 there will be no unresolved symbols in the resulting shared library.
 Empty, if no such flag is required.
 @end defvar
@@ -7135,7 +7134,7 @@ libtool.
 @node Cheap tricks
 @section Cheap tricks
 
-Here are a few tricks that you can use in order to make maintainership
+Here are a few tricks that you can use to make maintainership
 easier:
 
 @itemize @bullet


hooks/post-receive
-- 
GNU Libtool


From MAILER-DAEMON Mon Feb 10 08:54:53 2014
Received: from list by lists.gnu.org with archive (Exim 4.71)
	id 1WCrK1-0002x0-As
	for mharc-libtool-commit@gnu.org; Mon, 10 Feb 2014 08:54:53 -0500
Received: from eggs.gnu.org ([2001:4830:134:3::10]:33804)
	by lists.gnu.org with esmtp (Exim 4.71)
	(envelope-from <INVALID.NOREPLY@gnu.org>) id 1WCrJy-0002w6-3W
	for libtool-commit@gnu.org; Mon, 10 Feb 2014 08:54:51 -0500
Received: from Debian-exim by eggs.gnu.org with spam-scanned (Exim 4.71)
	(envelope-from <INVALID.NOREPLY@gnu.org>) id 1WCrJt-0006ER-69
	for libtool-commit@gnu.org; Mon, 10 Feb 2014 08:54:50 -0500
Received: from vcs.savannah.gnu.org ([140.186.70.72]:54199)
	by eggs.gnu.org with esmtp (Exim 4.71)
	(envelope-from <INVALID.NOREPLY@gnu.org>) id 1WCrJt-0006EG-2e
	for libtool-commit@gnu.org; Mon, 10 Feb 2014 08:54:45 -0500
Received: from pekberg by vcs.savannah.gnu.org with local (Exim 4.72)
	(envelope-from <INVALID.NOREPLY@gnu.org>) id 1WCrJs-0005v7-EX
	for libtool-commit@gnu.org; Mon, 10 Feb 2014 13:54:44 +0000
Date: Mon, 10 Feb 2014 13:54:44 +0000
Message-Id: <E1WCrJs-0005v7-EX@vcs.savannah.gnu.org>
From: "Peter Rosin" <peda@lysator.liu.se>
To: libtool-commit@gnu.org
Subject: [SCM] GNU Libtool branch, master, updated. v2.4.2.444-26-gc18b2d4
X-Git-Refname: refs/heads/master
X-Git-Reftype: branch
X-Git-Oldrev: fa83d293d95e2e3bdfbfe739fc12e5c3a6307b64
X-Git-Newrev: c18b2d494e03ed15407c65b1de4b2231d733fb75
X-detected-operating-system: by eggs.gnu.org: GNU/Linux 2.6.x
X-Received-From: 140.186.70.72
X-BeenThere: libtool-commit@gnu.org
X-Mailman-Version: 2.1.14
Precedence: list
List-Id: CVS commit notices for the GNU libtool shared library maintenance
	tool <libtool-commit.gnu.org>
List-Unsubscribe: <https://lists.gnu.org/mailman/options/libtool-commit>,
	<mailto:libtool-commit-request@gnu.org?subject=unsubscribe>
List-Archive: <http://lists.gnu.org/archive/html/libtool-commit>
List-Post: <mailto:libtool-commit@gnu.org>
List-Help: <mailto:libtool-commit-request@gnu.org?subject=help>
List-Subscribe: <https://lists.gnu.org/mailman/listinfo/libtool-commit>,
	<mailto:libtool-commit-request@gnu.org?subject=subscribe>
X-List-Received-Date: Mon, 10 Feb 2014 13:54:51 -0000

This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "GNU Libtool".

The branch, master has been updated
       via  c18b2d494e03ed15407c65b1de4b2231d733fb75 (commit)
      from  fa83d293d95e2e3bdfbfe739fc12e5c3a6307b64 (commit)

Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.

- Log -----------------------------------------------------------------
commit c18b2d494e03ed15407c65b1de4b2231d733fb75
Author: Peter Rosin <peda@lysator.liu.se>
Date:   Mon Feb 10 14:51:07 2014 +0100

    bootstrap: fix description of func_sort_ver to match recent sort change
    
    gl/build-aux/funclib.sh: Update comment to match reality.
    bootstrap: Regenerate.
    
    Signed-off-by: Peter Rosin <peda@lysator.liu.se>

-----------------------------------------------------------------------

Summary of changes:
 bootstrap               |    2 +-
 gl/build-aux/funclib.sh |    4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/bootstrap b/bootstrap
index feb20a1..eecab2c 100755
--- a/bootstrap
+++ b/bootstrap
@@ -1499,7 +1499,7 @@ func_warning ()
 # -----------------------
 # 'sort -V' is not generally available.
 # Note this deviates from the version comparison in automake
-# in that it treats 1.5 < 1.5.0, and treats 1.4.4a < 1.4-p3a
+# in that it treats 1.5 < 1.5.0, and treats 1.4-p12a < 1.4-p3a
 # but this should suffice as we won't be specifying old
 # version formats or redundant trailing .0 in bootstrap.conf.
 # If we did want full compatibility then we should probably
diff --git a/gl/build-aux/funclib.sh b/gl/build-aux/funclib.sh
index 9cb02ff..fe53505 100644
--- a/gl/build-aux/funclib.sh
+++ b/gl/build-aux/funclib.sh
@@ -1,5 +1,5 @@
 # Set a version string for this script.
-scriptversion=2014-01-03.01; # UTC
+scriptversion=2014-02-10.13; # UTC
 
 # General shell script boiler plate, and helper functions.
 # Written by Gary V. Vaughan, 2004
@@ -1268,7 +1268,7 @@ func_warning ()
 # -----------------------
 # 'sort -V' is not generally available.
 # Note this deviates from the version comparison in automake
-# in that it treats 1.5 < 1.5.0, and treats 1.4.4a < 1.4-p3a
+# in that it treats 1.5 < 1.5.0, and treats 1.4-p12a < 1.4-p3a
 # but this should suffice as we won't be specifying old
 # version formats or redundant trailing .0 in bootstrap.conf.
 # If we did want full compatibility then we should probably


hooks/post-receive
-- 
GNU Libtool


From MAILER-DAEMON Wed Feb 12 04:08:11 2014
Received: from list by lists.gnu.org with archive (Exim 4.71)
	id 1WDVnf-0006sY-Hr
	for mharc-libtool-commit@gnu.org; Wed, 12 Feb 2014 04:08:11 -0500
Received: from eggs.gnu.org ([2001:4830:134:3::10]:46588)
	by lists.gnu.org with esmtp (Exim 4.71)
	(envelope-from <INVALID.NOREPLY@gnu.org>) id 1WDVnc-0006sN-W4
	for libtool-commit@gnu.org; Wed, 12 Feb 2014 04:08:10 -0500
Received: from Debian-exim by eggs.gnu.org with spam-scanned (Exim 4.71)
	(envelope-from <INVALID.NOREPLY@gnu.org>) id 1WDVnb-000436-4Y
	for libtool-commit@gnu.org; Wed, 12 Feb 2014 04:08:08 -0500
Received: from vcs.savannah.gnu.org ([140.186.70.72]:53166)
	by eggs.gnu.org with esmtp (Exim 4.71)
	(envelope-from <INVALID.NOREPLY@gnu.org>) id 1WDVnb-000432-1C
	for libtool-commit@gnu.org; Wed, 12 Feb 2014 04:08:07 -0500
Received: from pekberg by vcs.savannah.gnu.org with local (Exim 4.72)
	(envelope-from <INVALID.NOREPLY@gnu.org>) id 1WDVna-0008TV-CK
	for libtool-commit@gnu.org; Wed, 12 Feb 2014 09:08:06 +0000
Date: Wed, 12 Feb 2014 09:08:06 +0000
Message-Id: <E1WDVna-0008TV-CK@vcs.savannah.gnu.org>
From: "Peter Rosin" <peda@lysator.liu.se>
To: libtool-commit@gnu.org
Subject: [SCM] GNU Libtool branch, master, updated. v2.4.2.444-28-g053df7e
X-Git-Refname: refs/heads/master
X-Git-Reftype: branch
X-Git-Oldrev: c18b2d494e03ed15407c65b1de4b2231d733fb75
X-Git-Newrev: 053df7eb31d21c6d6dbe54c44f42009efec9d0c9
X-detected-operating-system: by eggs.gnu.org: GNU/Linux 2.6.x
X-Received-From: 140.186.70.72
X-BeenThere: libtool-commit@gnu.org
X-Mailman-Version: 2.1.14
Precedence: list
List-Id: CVS commit notices for the GNU libtool shared library maintenance
	tool <libtool-commit.gnu.org>
List-Unsubscribe: <https://lists.gnu.org/mailman/options/libtool-commit>,
	<mailto:libtool-commit-request@gnu.org?subject=unsubscribe>
List-Archive: <http://lists.gnu.org/archive/html/libtool-commit>
List-Post: <mailto:libtool-commit@gnu.org>
List-Help: <mailto:libtool-commit-request@gnu.org?subject=help>
List-Subscribe: <https://lists.gnu.org/mailman/listinfo/libtool-commit>,
	<mailto:libtool-commit-request@gnu.org?subject=subscribe>
X-List-Received-Date: Wed, 12 Feb 2014 09:08:10 -0000

This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "GNU Libtool".

The branch, master has been updated
       via  053df7eb31d21c6d6dbe54c44f42009efec9d0c9 (commit)
       via  0d666fc13b8e5a110e7600866d6fa55dade4d4a0 (commit)
      from  c18b2d494e03ed15407c65b1de4b2231d733fb75 (commit)

Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.

- Log -----------------------------------------------------------------
commit 053df7eb31d21c6d6dbe54c44f42009efec9d0c9
Author: Peter Rosin <peda@lysator.liu.se>
Date:   Wed Feb 12 10:03:56 2014 +0100

    tests: sprinkle -no-undefined when linking libraries
    
    * tests/duplicate_conv.at, tests/f77demo.at, tests/fcdemo.at: Here.
    
    Signed-off-by: Peter Rosin <peda@lysator.liu.se>

commit 0d666fc13b8e5a110e7600866d6fa55dade4d4a0
Author: Peter Rosin <peda@lysator.liu.se>
Date:   Wed Feb 12 10:01:13 2014 +0100

    libtool: actually strip -Wl when relinking with $LD
    
    Fixes the regression from commit v2.4.2.444 which is causing a
    testsuite failure in duplicate_conv.at (seen on Cygwin).
    
    * build-aux/ltmain.in (func_mode_link): $reload_cmds typically
    starts with "$LD$reload_flag ..." when $LD is used to relink.
    Make the case expression match that when checking if $LD is in
    fact used to relink.
    
    Signed-off-by: Peter Rosin <peda@lysator.liu.se>

-----------------------------------------------------------------------

Summary of changes:
 build-aux/ltmain.in     |    2 +-
 tests/duplicate_conv.at |    6 +++---
 tests/f77demo.at        |    4 ++++
 tests/fcdemo.at         |    4 ++++
 4 files changed, 12 insertions(+), 4 deletions(-)

diff --git a/build-aux/ltmain.in b/build-aux/ltmain.in
index 3b4e6ec..f8e0f5f 100644
--- a/build-aux/ltmain.in
+++ b/build-aux/ltmain.in
@@ -8094,7 +8094,7 @@ EOF
       # whole_archive_flag_spec and hope we can get by with turning comma
       # into space.
       case $reload_cmds in
-        *\$LD\ *) wl= ;;
+        *\$LD[\ \$]*) wl= ;;
       esac
       if test -n "$convenience"; then
 	if test -n "$whole_archive_flag_spec"; then
diff --git a/tests/duplicate_conv.at b/tests/duplicate_conv.at
index cf1ba6a..3e39b20 100644
--- a/tests/duplicate_conv.at
+++ b/tests/duplicate_conv.at
@@ -50,7 +50,7 @@ $LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o a/liba.la a/a.lo
 $LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o b/liba.la b/a.lo b/b.lo
 
 # Fold into convenience archive.
-AT_CHECK([$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o libcee.la c.lo a/liba.la b/liba.la],
+AT_CHECK([$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -no-undefined -o libcee.la c.lo a/liba.la b/liba.la],
 	 [0], [ignore], [ignore])
 AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT ./libcee.la],
 	 [0], [ignore], [ignore])
@@ -62,7 +62,7 @@ $LIBTOOL --mode=clean rm -f libcee.la
 #        OTOH, we'd like to test the other situation, too.
 
 # Fold into static library.
-AT_CHECK([$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -rpath /foo -static -o libcee.la c.lo a/liba.la b/liba.la],
+AT_CHECK([$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -no-undefined -rpath /foo -static -o libcee.la c.lo a/liba.la b/liba.la],
 	 [0], [ignore], [ignore])
 AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT ./libcee.la],
 	 [0], [ignore], [ignore])
@@ -70,7 +70,7 @@ LT_AT_EXEC_CHECK([./main],[0],[ignore],[ignore])
 $LIBTOOL --mode=clean rm -f libcee.la
 
 # Fold into library.
-AT_CHECK([$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -rpath /foo -o libcee.la c.lo a/liba.la b/liba.la],
+AT_CHECK([$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -no-undefined -rpath /foo -o libcee.la c.lo a/liba.la b/liba.la],
 	 [0], [ignore], [ignore])
 AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT ./libcee.la],
 	 [0], [ignore], [ignore])
diff --git a/tests/f77demo.at b/tests/f77demo.at
index da8e324..da7e18b 100644
--- a/tests/f77demo.at
+++ b/tests/f77demo.at
@@ -64,12 +64,16 @@ lib_LTLIBRARIES = libfoo.la libmix.la libfoo2.la libfoo3.la
 
 libfoo_la_SOURCES = foof.f
 libfoo_la_LIBADD = libfoo2.la
+libfoo_la_LDFLAGS = -no-undefined
 
 libfoo2_la_SOURCES = foof2.f
+libfoo2_la_LDFLAGS = -no-undefined
 
 libfoo3_la_SOURCES = foof3.f
+libfoo3_la_LDFLAGS = -no-undefined
 
 libmix_la_SOURCES = foof.f foof2.f fooc.c
+libmix_la_LDFLAGS = -no-undefined
 
 noinst_HEADERS = foo.h
 
diff --git a/tests/fcdemo.at b/tests/fcdemo.at
index 8cfa214..34953ac 100644
--- a/tests/fcdemo.at
+++ b/tests/fcdemo.at
@@ -68,12 +68,16 @@ lib_LTLIBRARIES = libfoo.la libmix.la libfoo2.la libfoo3.la
 
 libfoo_la_SOURCES = foof.f90
 libfoo_la_LIBADD = libfoo2.la
+libfoo_la_LDFLAGS = -no-undefined
 
 libfoo2_la_SOURCES = foof2.f90
+libfoo2_la_LDFLAGS = -no-undefined
 
 libfoo3_la_SOURCES = foof3.f90
+libfoo3_la_LDFLAGS = -no-undefined
 
 libmix_la_SOURCES = foof.f90 foof2.f90 fooc.c
+libmix_la_LDFLAGS = -no-undefined
 
 noinst_HEADERS = foo.h
 


hooks/post-receive
-- 
GNU Libtool


